Strange noise and fuzzy picture

Yes. Use the Copy command in the Memory Stick Tool menu as shown on page 64 of the DSC-H2 User's Guide:
http://www.docs.sony.com/release/DSCH2.pdf

The Sony DSC-H2 and DSC-H5 have a terrible shutter button design and Sony will not admit that it's a design problem. The post for the shutter button is so thin that it snaps in half very easily!!

If you do a Google search for "Sony shutter button repair" you will see the #1, 2 and 3 links are all for www darntoothysam com. We have done hundreds of this repair over the years!

The repair service is just $70 total for the part, installation and return shipping of the camera. Please visit our site, we would be happy to service your camera.

Hope this helps!

Thomas D.
Owner, Darntoothysam.com
Affordable Digital Camera Repair

take it for servicing

The viewfinder and the picture lens are totally separate. If it looks fuzzy, and then comes out fuzzy, the capture screen inside needs cleaned. The main lens and viewfinder lenses should be cleaned too.
Get estimates before you say yes to the work. It might be cheaper to buy another camera, unless you can do the work yourself.

Hi there.
It sounds like the lens is having difficulty moving into position, cover the lens with your thumb and spray a little WD-40 around the affected area.
With the camera card, take it out, clean the contacts and blow down the slot to remove any dust that may have built up.
Make sure the camera is turned off while you spray it.

Good luck and thanks for choosing FixYa!!

There could be two things causing this problem.

1- some dirt somehow got on the outside of side of the lense. So the lense could not fully retract or open out. As a result you can take any picture. If the lense comes out even a little bit, try to pull it out NOT too hard a few times. If it does not retract, turn the camera off and push the lense in (up and down) NOT too hard foe a few times. If the camera opened up 100% or retracted 100%, your camera should be back to normal.

2- If you dropped the camera, some mechanical part of the lense is broken or dislocated or the cable may have come loose. In this case you need to take out the lense from the camera and inpect it for broken pieces or loose cable. clean the outside of the lense and push the lense in and out a few times. Put the lense back on and your camera would be back to normal.

Good luck!!!!!!

CCD FAILURE !

actually when it starts it starts like this pics with red or purple shades , noise ,distorted, blurred pics , discolored then it goes completely black

dont worry just call Sony for free repairs it is a manufac fault in thousands of cameras with different brands just call sony about ur problem PLS RATE ME FIXYA for help

Sony has issued service advisories for these problems

http://esupport.sony.com/US/perl/news-item.pl?mdl=DSCT1&news_id=161

see this

http://www.imaging-resource.com/badccds.html

Viewfinder has focus lever at bottom, please adjust viewfinder internal focus as per your eye sight looking on-screen display. Every thing will be fine after that.

thats normal.
it just doesn't have enough power to bring the lense back in.
once you charge your battery and turn it on the lense will automatically come back in and then out for you to take a picture.

switch on when the lense extends take hold of the end and gently twist and pull the lense you may hear it click. be gentle do not force it then switch on and off again this should solve the problem