Question about Sony Ericsson M600i Cellular Phone

2 Answers

Sony Ericsoon M600i Crash Restart to increase performance

I only just purchased a M600i and every few seconds it restarts its self and provides the note that "the phone has restarted to increase the phones perfomance" it does this continiously very anoying. Any way to fix this problem as its not even 2 days old.
Thanks for any help you can provide.

Posted by on

  • 1 more comment 
  • rexy73 Feb 07, 2008

    My phone justs shuts down everytime I turn on the phone and displays the message " restarted in order to improve performance". My phone was working fine before I upgraded my phone use SE update software. Please help. I also asked you how to flash the phone. Thanks again.

  • tedy Apr 22, 2008

    i have SE M600i but error.i was charge M600i,before that i aws shutdown the phone and then it cant on no more,please help how to fix this problem.thanks

  • rexy73 May 11, 2010

    How do you reflash the M600i phone? Thanks in advance

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

It seems your phone is running out of memory. M600i comes with 60 to 80 MBs internal memory. The phone treats larger part of the memory as RAM. And UIQ3 the OS on this phone retains the applications in its RAM once it is opened till you go to Task manager and press exit program. Thus, phone has no other option but to restart to free some memory and show the above message. In your case as you've said the phone restarts after few seconds try this as soon as it starts and home screen appears:- 

  • press (use the jog dial {wheel} and the star key) >*<<*<* (thats:- up*down down*down*) service menu will appear 
  • choose format/restore phone settings whichever applies to your phone enter the security code by default it is (12345). It will format the phone's internal memory which is also used as RAM in M600i. The error message "the phone was restarted to improve performance" appears when there is no more free memory left in the phone's internal memory. Try this and post the result.

Posted on Feb 09, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 241 Answers

Hi - it seems that you have the same issue as many other M600 owners, the first few releases had a poor firmware.
If you reflash your phone, you should be ok - but be careful as yours is NOT standard GSM phone - it is PDA.

Posted on Jan 17, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My M600i keeps restarting each time i put it on


Your provider might be able to help you- take it into them and see what they say can be done.

Mar 01, 2014 | Sony Ericsson M600i Cellular Phone

1 Answer

How do i format my laptop sony ns-series completely because it got spyware virus in it and i want to format it completely. thanks


Hi,

The computer is supplied with a recovery partition in the hard drive. You can use the same to restore the computer back to factory settings. Please restart the computer and then press and hold F10 key to access the recovery partition. Once you access the same, please select "Restore C Drive" to perform a System Recovery.

As you have mentioned that the computer is infected by virus, there is a possibility that System Recover using the above method may not eradicate all the virus. In that situation a "Complete System Recovery" will be required. To perform a Complete System Recovery, you need the recovery discs. If you have created the recovery discs before, then you can use the same to perform a complete system recovery.

Else you can purchase the recovery discs from the below link:

https://servicesales.sel.sony.com/ecom/accessories/web/shoppingCart.do?operation=addToCart&itemId=679907&searchOperation=partSearch&searchText=Y8318687A

It is required to purchase the recovery discs only if the first step didn't resolve the issue. I'm providing the second options as additional information.

Hope this helps.

Thanks!!!!

Dec 30, 2010 | Sony VGN-NS230E/P Notebook

1 Answer

My computer turns off and on again for a few seconds. (this time it will bootup) when i pressed the power button. i already change the ram to 1gb but the problem still occurs. What can i do to fix this...


It may be owe to software problem 1, the virus "shock" virus attack will prompt system will automatically start in few seconds. From the remote control you Trojan program all the activities of the computer, including let your computer restarts. Remove viruses, trojans, or reshipment system. 2, the system files damage system files destroyed, as the KERNEL32. Win2K DLL Win98 features, the font list below such basic execution system files destroyed at startup, system will therefore cannot finish initializing and forced the restart. Solution: cover installation or reinstall it. Hardware problem: 1.Chassis power is not enough, dc output is pure, the dynamic response sluggish. Users often ignored or assembling businessman, using cheap price of power supply, so is the largest system of automatic restart suspicion. (1) the power output power shortage, when run large 3D gaming occupy CPU resource of software, the CPU needs power supply, power is not caused by overload protection, stop the power output. After the output power to stop, load, reduce power restart. Due to the protection of the recovery/time is short, so we are hosting automatic restart. (2) power dc output is pure, pure dc power supply of digital circuit requirements, when the power output of too direct, the harmonic content will result in digital circuits, performance is often work to crash or restart. (3) working load of the CPU is dynamic, on the current requirement is dynamic, and the dynamic response speed quickly. Request Some of the poor quality power dynamic response for a long time, could also lead to crash or frequent restart. (4) high-end graphics update equipment (large disk/video card/equipment (increased), after the hard disk) / burners, power supply of original beyond rated output power will cause the regular crash or restart. Solution: now in high quality high-power computer power. 2.The memory chip thermal stability, incorrect or damage to restart the system memory problems to restart the system of risk. (1) the poor thermal stability of memory, boot can work normally, when the memory to a certain temperature, temperature is can not work normally, which leads to crash or restart. (2) memory chips, slightly damaged, also can pass on self into the system, when the operation can be some big software throughput will restart or crash. Solution: replace memory. (3) memory of CAS value too small can also lead to instability caused by system memory, automatic restart. General had better use the default Settings, don't roll change yourself. 4.The CPU temperature exorbitant or the cache damage (1) the CPU temperature exorbitant often causes protective automatic restart. The basic reason of high temperature is due to poor cooling chassis, CPU, the CPU is undesirable reasons: the heat radiator thermal conductivity low, radiator material with a foreign body between CPU interface (1) for quality assurance, fan speed is low, the fan and radiator dust too much, etc. And P2, P3 motherboard CPU temperature probe damaged under the mp4 or within the CPU temperature detection circuit on the mainboard damage, the BIOS BUG in a special conditions of temperature, the CPU CMOS setup to protect low temperature, etc. Can also cause protective restart. (2) of an internal CPU, level 2 cache damage is CPU common fault. The extent of damage, or can start, when running into the system, the software (some throughput big media player, games, 3D graphic) will restart or crash. Solution: in the CMOS setup of shield (L2) or level 2 cache cache (L1), 1 or replace the CPU. 4.AGP display, PCI CARDS (nics), cat restart automatically (1) the external card or poor quality work not standard, AGP/PCI bus signal misoperation cause system RESET to restart. (2) and graphics, loose network system may cause restart. 5.Parallel, USB access is serial, fault or the incompatibility of external devices restart automatically (1) the fault or not compatible with the parallel damage, such as printer, a foot of short-circuit, USB equipment damage of short circuit, signal level sutural definition, opaque, etc. (2) hot swaps external devices, shaking, cause signals or power instant short-circuit. 6.Mainboard failure In case of automatic restart motherboard is rare. Generally RESET circuit are associated with a fault, Socket weld is empty, slots, contact undesirable, Individual chip, capacitance elements such as damage.

Jun 23, 2010 | Acer Aspire 4315 Notebook

1 Answer

Internet usage


First you will require the internet settings..... Internet settings are dependent on your sim service provider. So you must call to your service provider's help centre and ask them to send you the same.

Apr 18, 2010 | Sony Ericsson M600i Cellular Phone

1 Answer

Im just buy SE m600i second hand,now i want reset m600i phone lock,does anybody knows how to reset it?


The code is usually 0000 or 1234. If none of them working then reinstall firmware using SEUS. This will also wipe out everything from phone so do back up before update.

Sep 25, 2009 | Sony Ericsson M600i Cellular Phone

1 Answer

Endless restarting


it is the resident problem in this model and P990i u can do one thing actually it is memory shortage problem the RAM they provided is too small and it cant accomodate much requests as more programs u load one after another and the others u dont close remain in memory

u can get swiss manager it is a mem management program if u get it u will never face problems again and it will never restart just go to this site and install it on ur pda and configure for better performance it will give new life to it i bet

http://www.cellphonesoft.com/produ3/download.php
pls rate me WELL !

May 17, 2009 | Sony Ericsson M600i Cellular Phone

1 Answer

My phone hang


It seems your phone is running out of memory. M600i comes with 60 to 80 MBs internal memory. The phone treats larger part of the memory as RAM. And UIQ3 the OS on this phone retains the applications in its RAM once it is opened till you go to Task manager and press exit program. Thus, phone has no other option but to restart to free some memory and show the above message. In your case as you've said the phone restarts after few seconds try this as soon as it starts and home screen appears:- 
  • press (use the jog dial {wheel} and the star key) >*<<*<* (thats:- up*down down*down*) service menu will appear 
  • choose format/restore phone settings whichever applies to your phone enter the security code by default it is (12345). It will format the phone's internal memory which is also used as RAM in M600i. The error message "the phone was restarted to improve performance" appears when there is no more free memory left in the phone's internal memory. Try this and post the result.

Nov 12, 2008 | Sony Ericsson M600i Cellular Phone

4 Answers

M 600 i master reset code


Respected Sir,
I am not able to send or receive SMS or MMS. My messaging application has been closed vide error code Reason E32USER-Cbase with reason 21.
Hencce I wnt master reset to be done.

Oct 23, 2008 | Sony Ericsson M600i Cellular Phone

Not finding what you are looking for?
Sony Ericsson M600i Cellular Phone Logo

Related Topics:

688 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

270rexton
270rexton

Level 3 Expert

782 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...