Question about Panasonic TH-50PX75U Plasma HDTV

7 Answers

My plasma panasonic wont turn on

When i pres the power button it just keeps blinking seven times andstops for one or tw seconds and starts blinking again what sems to be the proble can any body help me thanks.

Posted by on

  • 1 more comment 
  • irene tiney May 02, 2008

    i have a problem with my 42'' panasonic plazma tv no picyure and no menu just a flashing red light off and on

  • Anonymous Jun 02, 2008

    my son has same problem with tv blinking and wont turn I am sending this for him he does not have a computor.....Christopher G

  • meiderbox Mar 24, 2009

    this is bull ****, the tv just shut off after 13 months and now will turn on with sound for 3 seconds, (no picture) then turns off. and the stupid light blinks and blinks and blinks

×

Ad

7 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

If you have 10 blinking red lights it is a problem with the DG board on the inside....replace this board and It will take care of any possible 10 blink issues.....

Caution: If you replace this board chances are it may happen again....go on ebay and get one for $25 to $80 and put it in yourself.....This is a known issue that Panasonic denies....

retail price is about $380 to $480 for a new one......dont do it!

Posted on Mar 23, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers
Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Seven blinks according to AV Science Forum (avsforum.com) means power supply is shot on this Panasonic. Having a simmilar problem but blink ten times meaning problems with video board. Good luck. Hopefully it will be a cheaper solution..

Posted on Feb 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Panasonic 42" plasma tv shut off and now it will not turn back on

Posted on Nov 17, 2008

The blinks are a failure code indicating that some component in your tv isn't functioning properly. It happened to my 46" panasonic plasma 2 weeks after I got it. The light on my tv was blinking 11 times repeatedly, which apparently means a fan circuit failure. I called Panasonic and they are sending someone out to fix it. I'm glad I got the extended warranty...

Posted on Jul 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem

Posted on May 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

It's related to some boards failure. Could be Power board or DG board or even H board. If still in warranty, send to warranty depot shop to repair.

Posted on Jan 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 56 in hdtv Panasonic tv will not come on green light flashes 20 times then goes to red. Help, on disability fixed income & cant afford to get repair or new tv. Please help, as soon as poss


Panasonic Plasma TV Repair - Understanding 14 Blink ...

? 8:35
https://www.youtube.com/watch?v=iHBIiRxhe0w
Sep 26, 2014 - Uploaded by ShopJimmy.com
Panasonic Plasma 14 Blink Code Explained with Repair Info How to ... I guess I'll try the SC board and if that does not work simply save up for a new ... The red power led was flashing 12 timespause a few seconds then flash 12 again. ... It powers up and shows the green power light is on, but there's no ...

The power light keeps flashing and the tv wont turn on - TV ...

www.tomsguide.com/answers/id.../power-light-flashing-wont-turn.html
Oct 24, 2015 - More about : power light flashing wont turn ... December 20, 2013 10:12:55 AM ... sound like it is coming on then it shuts off and the red power light flashes slowly. ... 50in Plasma tv power light is flashing 8 times and won't turn on. ...tv to come on bcause the power button keep blinking my tv will not come on.

Nov 06, 2015 | Panasonic Televison & Video

1 Answer

Panasonic seven blinking lights


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Jul 28, 2015 | Panasonic Televison & Video

2 Answers

Setting the Sharp atomic clock SPC315


Sharp SPC315 Clock Setup Instructions

Set Time Hours and Minutes:
Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press the Adjust/Channel button to change the hour.
Press the Time/12/24 to go to minute
Press the Adjust/Channel button to change the minute.
Press the Time/12/24 to set.

Set Alarm1 and Alarm2:
Press the Alarm1/Alarm2 button to toggle either Alarm1 or Alarm2 to set.
Pres the Alarm1/Alarm2 and Alarm2/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press the Adjust/Channel button to change the hour.
Press the Alarm1/Alarm2 to go to minute
Press the Adjust/Channel button to change the minute.
Press the Alarm1/Alarm2 to set.

Set Calendar Year:
Press Calendar/C/F and Max/Min buttons at the same time for two seconds and it will start to blink the calendar year.
Press the Adjust/Channel button to change the year.
Press the Calendar/C/F to go to Month.
Press the Adjust/Channel button to change the Month.
Press the Calendar/C/F to go to Day.
Press the Adjust/Channel button to change the Day.

Mar 01, 2015 | Sharp Atomic Weather Station Alarm Clock...

1 Answer

I accidentally overheated my Panasonic Plasma TV TH-42PZ700U. It won't turn on, and the power button blinks TEN times.


Check and see if there are any blown caps on the power supply. If there are replace them or change your power supply.

Thank you

Mar 20, 2012 | Panasonic TH-42PZ700U 42 in. Plasma...

2 Answers

Panasonic 42 inch plasma wont turn on. red light blinks 10 times


I unpluged mine and the light was still blinking when it was unpluged. I thought that was weird. So I pluged it back in and just heald the power button in untill the light went out. It went out within ten seconds. I pushed the power button again and the tv went on. WOOHOO!!! Just needed reset, I guess.

Dec 10, 2011 | Panasonic Viera TH-42PZ85U 42 in. Plasma...

1 Answer

I have a kitchen-aid dishwasher model # KUDio1ibl6 and it will not come on and the clean light flashes 7 times then pauses and blinks 7 time again. Do you have any Idea what this code stands for I do not...


Hello Asa,

The light blinking seven times is a error code specifically it's error #7 .The E-7 error indicates the part called the flow meter is bad. To clear that error code and get the dishwasher to start push within 3 seconds
HIGH TEMP WASH -HEATED DRY-HIGH TEMP WASH- HEATED DRY

then push CANCEL sereval times to dishwasher shuts off..it should start and run then

If the blinks 7 times again the flowmeter will need to be replaced

ON some models the "HIGH TEMP WASH" button is labled power scrub instead of high temp wash
so in that case push POWER SCRUB-HEATED DRY-POWER SCRUB-HEATED DRY then cancel as described above

In case the E-7 error returns and the flowmeter needs to be replaced the part number for it is W10195536

Gene

Aug 24, 2011 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

Mitsubishi WS-55819 turns off after about one second upon power up. Help


try the self test: when it goes off press and hold the menu and input buttons at same time for about seven seconds and release both.

power light blinks two digit code like, one blink, two blink, a pause and repeats it several times, this code will indicate area of problem.

sj

May 17, 2011 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

I used shift to us the remote control with the secondary TV. Now i cannot get it to correspond with the main tv. How do I fix the problem. Thanks


If u stil hve the manual, plz consult it. OR u press n hold shift, pres ur device button (tv), indicator light starts blinking, pres n release ur search/power button continuosly, whn u get response from ur tv, leave it 4 a few seconds, the light goes off n ur remote is set again.

Apr 10, 2011 | Universal Remote Control Dish Network...

1 Answer

I replaced the lamp however the green light blinks for a minute then the lamp light comes back on and the tv can't be turned on. WD-Y57 model


with that model after the tv shuts off pres the "menu" and "device" button on the front panel buttons together for about 8 seconds and then the power led will blink green. it will blink a certain number of times then pause and blink a different number of times this will be the error code for the fail that the tv thinks it is having. for example it may blink green 6 times then pause and blink 1 more time that would be code 61 check the code and repost and i will tell you the next course of action good luck

Jan 05, 2011 | Mitsubishi WD-Y57 57" Projection HDTV

Not finding what you are looking for?
Panasonic TH-50PX75U Plasma HDTV Logo

1,875 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5342 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75147 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...