Question about Dewalt DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

1 Answer

Schematic / service information for Black and Decker VP 130 battery charger

Need service information on Black and Decker VP 130 battery charger.
Schematic with voltage reference points prefered.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,219 Answers
Re: Schematic / service information for Black and Decker...

Power supply for the VP130 is a 4.32v 210ma AC transformer.
The AC supply is fed to the charger battery box where there are two diodes one for each battery.
each battery is 3.6 volts.

Posted on Mar 07, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My Black and Decker Drill and Hand Saw have brand new battery pack and brand new charger to BE SURE battery is fully charged but still don't work

it is probably the brushes on the motors are wore out or stuck and not making contact. pretty much junk unless you feel confident enough to attempt repair.

Dec 11, 2013 | Black & Decker Black and Decker 18V...

1 Answer

Black & Decker LITHIUM CHARGER 14.4v to 18v . 90539541. fits A1518L, HP1884L

could be either one. Have you tried another battery? If not I would recommend taking BOTH in for inspection. They have a scanner that can detect if the battery has a problem. If you need to find a service center close to you go to and they have a locator. Let me know if you need more assistance.

Jan 31, 2012 | Black & Decker 14.4v Cordless Lithium...

1 Answer

I have a black/decker drill Fire/Strom 12V When I pug the charger into the electric outlet the light doesnt come on. So I leave it in but the battery never get charger. is it the charger or the battery.

How old is the battery there olny good for 3 or4 years and if you leave themin the cold they won;t last half that long yours is an older one the battery dosn;t come off it although i like black and decker i would have to say even if it was the charger and you got a new one the battery wouldn;t live vary much longer

Nov 23, 2010 | Black & Decker Drills & Drill/Drivers

1 Answer

I have a black & decker fire storm drill. The charger doesn't seem to charge the batteries. I was wondering if i need a new charger? Is there a number I can call? Please advise.

u can call black&decker and get one that way or go to your local hardware store or the place you bought it from and you should be able to get another one.

Sep 30, 2010 | Black & Decker 18V Cordless Drill/Driver

3 Answers

My porter cable 19.2v model 8605 battery charger

Porter Cable has not offered a replacement for their poorly designed 19.2V chargers. I had the same problem and happen to like my drill and circular saw. I found a universal charger called a model number CHUN-2420. Google it--I got mine for $27 plus shipping. All you need to do to make this work is splice 3 wires.

My charger is a PC model 8624, so the instructions might vary slightly between the chargers. Remove the six screws on the bottom of your PC charger. Remove the bottom section. Remove the screw(s) that attach the circuit card to the plastic housing. Disconnect the 3 pin white charging connector from the circuit card, and cutoff the connector. Discard the circuit card and power cord. Cut the 3 conductor (red/yellow/black) cable coming out of the Chun-2420 approximately 2' from the charger. Splice these three wires to the three wires in the charger housing that connect to your battery. In my situation, Red/Red, Yellow/Yellow, White/Black. To verify, red=positive, black/white=negative, yellow=temperature sensor. Wrap the red/yellow/black cable with electrical tape where it exits the PC charger through the power cord hole. Re-attach the bottom.

Jul 24, 2010 | Porter Cable 19.2V Drill Kit

2 Answers

Charger problem CL180

Call Black and Decker customer service, or better yet a DeWalt service center nearest to you.  Tell them you have this kit.  They are willing to give you 20% off a new DeWalt cordless kit.  Parts are non existing for this Delta Shopmaster set.  Black and Decker bought Delta just after this set was on the market.  I have searched and searched, all I can find is battery rebuilders.  I had the exact problem you had with the charger.  I tried to retrofit other manufacturers battery chargers, to this sets batteries, and still no dice.  I would call the nearest DeWalt/Black & Decker/Porter Cable/Delta service center and talk to them about a trade in on your units.  Something for this set is better than nothing I guess?  I think I am going to go this route with my set.

Sep 26, 2009 | Drills & Drill/Drivers

1 Answer

I just wonder i can still get battery charger for black decker cordless drill mode is ps3600 because my old one is not working i need new one

Menards or Home Depot sell chargers for cordless power tools. Pricey, but obviously needed. The Black & Decker model battery you own should fit the newest chargers no problem.

Aug 22, 2009 | Drills & Drill/Drivers

1 Answer

Black/Decker 12 v drill charger will not charge battery. help

If the battery gets warm after being in the charger a while and still is not charged, then the battery is bad
if the battery stays cool in the charger then the charger may be bad
Chargers usually have a light code, I.E. on means charged, slow flashing means charging, and a quick blinking means bad battery
Some chargers have 3 lights and the code should be imprinted on the charger.
hope this was helpful, cb

Apr 15, 2009 | Black & Decker Drills & Drill/Drivers

1 Answer

Charger not charging have 2 new chargers neither 1 will work for black& decker 18 volt cordless

You should probably contact Customer Service regarding this. I'd say it's a problem with the batteries rather than the chargers considering this looks like a recent EPC model - 1800 444 224

Mar 08, 2009 | Black & Decker 18 Volt Cordless Drill...

Not finding what you are looking for?
Dewalt DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only Logo

711 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Drills & Drill/Drivers Experts


Level 3 Expert

56925 Answers

Jim Thurston

Level 3 Expert

669 Answers


Level 3 Expert

1113 Answers

Are you a Dewalt Drill and Drill/Driver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides