Question about 2wire (1000-400108-001) Router

1 Answer

Restarting, My 2wire is randomly restarting It was working fine a little while ago.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 185 Answers
Re: Restarting,

Hi Brightside
A couple of things you could try.
1) Switch the router off at the mains power socket or disconnect it. Then leave it off for 5 minutes before reconnecting it. This can sometimes reset things and may clear the problem.
2) Make sure that the connections to and from the router are secure. Unplug them and plug them back in again.
3) Make sure that the telephone line is not faulty and has not developed an internittent adsl connection. You may need the phone company to test it for you.
4) Sometimes connection cables can pick up noise from other equipment, especially if in close proximity to mains wiring. This can cause problems. Try moving the connection cables to a different position. Sometimes only a few inches is enough. Laptop power units for exmple, can be a real source of noise.
Good luck

Posted on Jan 27, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My modem is blinking green and it doesn't work

if dsl light is flashing is trying to get connetion from isp check wires from jack to modem
check for filters on phones,fax,alarm systems(not on modem)
or call your isp

Apr 28, 2010 | 2wire (2701HG-B) Wireless Router

1 Answer

The lights went out and the router stopped working

not usually... try a reset, little hole in rear and press the little button there. That may work...

Mar 02, 2010 | 2wire HomePortal 1000 Router

1 Answer

No association with access point? was working

Try restarting your access point then restarting your computer. I have a wireless network and have to do this regularly. After I do, everthing works fine. As long as nothing happened to change your network settings on your computer, the restart should work.

I hope that this information was helpful and gets you started on the right track to solving your problem.


Jan 24, 2010 | Linksys Wireless-G WRT54GS Router...

1 Answer

2Wire 1701HG Wireless Modem dead

do one thing just upgrade the latest firmware in that

May 13, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Wireless Internet stopped working. Can't reconnect.

If restarting the router and restarting computer did not work (unplug both power cables), then you need to log into the router and check network settings.

To log into router type the router IP on internet explore bar, then enter user id and password.
You find details on how to do this, IP and passwords listed on the owner manual.

If wireless security settings on router are fine, then you can reset router to factory default using the pinhole switch. You will need to enter all your broadband settings to have the router working afterward.

Apr 27, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

I have a 2wire wireless router and it keeps restarting

Test it on a different phone outlet, if it does the same , then the router is faulty. In that case replace the router. If router works fine on a different phone outlet, then the phone socket is faulty.

Mar 31, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

2wire router

ANOTHER COMMON ISSUE: If your modem keeps restarting once the power LED turns solid green, the most likely cause is the power adaptor. Replace the power adaptor and all should be well again.

Jul 11, 2008 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Unable to actually connect to the internet?

Have you tried restarting your router? If not, try unplugging the ac power from the router, wait 30 seconds, and plug it back in. That will usually take care of this problem. If that doesn't work, you can try going into "manage your wireless connections", delete your wireless network from the list, then reconnect to your network.

May 11, 2008 | 2wire 1800HG Router (RG1800HG00)

1 Answer

Occasional reboots

i too have found this problem with the 2 wire 2700 and found that if the router tries to alter the connection speed and finds it cannot connect at the faster speeds it has to reset itself to revert back to a slower connection speed, so keep an eye on your connection speed which can be found in the routers settings on the initial page and check if the speed registered is faster than that of which your line can carry, if so then you need to contact your isp.

Aug 31, 2007 | 2wire 2700HG-B Router (2700HGB)

Not finding what you are looking for?
2wire (1000-400108-001) Router Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Routers Experts

 C. Dante
C. Dante

Level 3 Expert

623 Answers

Bob S

Level 1 Expert

15 Answers


Level 3 Expert

2072 Answers

Are you a 2wire Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides