Question about One For All URC-3021 Remote Control

1 Answer

Help I programed my remote to another tv to get at the menu now i can't get it programmed with my tv anymore tried to reset and still won't program with the tv

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers

Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC3021
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(For low price replacement remotes visit www.sparky-uk.com)

Posted on Jan 17, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need sansui 076k0ut011 led tv remote codes to program an rca tv


reset sansui tv remote control 076k0ut011 Questions ... - Fixya

www.fixya.com > Forum > Tags
...your help in advance. need code for a one for all URC-2060B06 sansui tv try these ... ...sansui tv with a RCA 704 remote control I have sansui tv and a RCA 704 remote ... URC-3021 Remote Control: How do i program this remote to a sansui tv? ... TV Remote Controls Sansui Remote eBay NEW Orion Sansui JVC LED TV ...

reset sansui tv remote control 076k0ut011 Flat Panel ... - Fixya

www.fixya.com > ... > Tags > reset sansui tv remote control 076k0ut011
Flat Panel Televisions reset sansui tv remote control 076k0ut011 questions and answers. ... ...sansui tv to program rca remote to it model # HDLCD1955C need tv code for this model ... Question about Contex 39-inch 1080p LED TV LE39D3.

Original Sansui - Orion TV Remote Control 076K0UT011 ...

? 1:00
https://www.youtube.com/watch?v=mPbRsUI0xnk
Dec 21, 2012 - Uploaded by ElectronicAdventure
Original Sansui - Orion TV Remote Control 076K0UT011 - Save $5 with ... have the New Original Remote ...

[PDF]Operating Instructions For 4-Function Cable



Dec 16, 2015 | RCA Televison & Video

1 Answer

No remote. How do I reset the menu or channel programming? Using sat box, but can't get the TV to channel 3.


You best bet really is to locate an original and not a universal remote for the set

Apr 08, 2012 | Televison & Video

1 Answer

I need help I just won a tv but it didnt come with a remote but I have a RCA remote transmitter. Im trying to program it for the tv but I dont have the book anymore can you please help me The tv is on but...


This Web page should allow you to find the codes for any devices you want to add for this remote.http://remotefinder.rca.com/default.aspx?site=rca
Other than that there is an easy way to program this remote.
1. Turn on the device by hand. 2. Hold down the device name key.(hold the TV button to program a TV) 3. While holding down this key also hold down the power key until the red light turns off and comes back on. Then release both buttons. 4. From here hit the power button repeatedly until the device turns off. 5. Hit the stop key at the bottom. Now the remote is programmed for that device.

May 05, 2011 | Televison & Video

1 Answer

I have a 27 inch symphonic crt tv. i have a bell satellite reciever hooked up to it with the renote programmed for the tv. i accidentally hit the mute button and now there is a 2 on each corner of the tv...


hi there, plugging and unplugging won't work that way. Pls try This:
1. look for the Program menu of your bell satellite unit
2. under menu you will see the settings there and try to reconfigure it or reset the current program.
3. scan for available channels and save it. i hope this will help you a little. Thank You.

Feb 07, 2011 | Televison & Video

1 Answer

Programming my directv remote to operate this tv, codes dont work


I just programmed mine by using my direct tv remote...
Go to MENU on the direct tv remote
Then highlight HELP & SETTING and press SELECT.
Press SELECT on Remote in the left menu.
Simply follow the onscreen instructions to program your remote. IT IS IMPORTANT TO MAKE SURE YOU HOLD ON AND SEE THE GREEN LIGHT ON THE DIRECT TV REMOTE FLASH TWICE, otherwise it won't work....which is what I think is happening in your case. Good luck.

Apr 22, 2009 | Sanyo DP42848 LCD TV

3 Answers

DHG-HDD250 problems when recording


When I'm watching a recording program and recording a program I can't fast forward, pause, stop nothing works until the program that is recording stops.
I reset the machine, but it did not help.

Feb 26, 2008 | Sony DHG-HDD250 200-Hours Video Recorder

1 Answer

Lost remote reset chanels


the great thing about sony is you dont need the remote to do menu functions. there is a flip down panel in the front that has the menu, cursers, and select buttons. just select the tab you need in the menu (channels) select the type of input (cable :on/off) then auto program. be sure to have the VCR off so not to program the channel 3 only.

Jan 22, 2008 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Unable to program year 08


8 key broken on your remote? try a universal remote.. if not then the people who programed in the years into the tv figured that the tv wouldnt be in use in 10 years so they stoped programing at 07' ... not really a whole lot you can do there but deal with it or buy a new TV. sorry =(

Jan 18, 2008 | Quasar VV-1302 13 in. TV/VCR Combo

7 Answers

Lg television du-27fb32c reset to factory settings


mute on the remote and menu on tv

service mode and go to factory reset

Dec 09, 2007 | LG DU-27FB32C TV

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

75157 Answers

Cindy Wells

Level 3 Expert

5337 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...