Question about Kenwood KDC-MP435U CD Player
I would like to add a remote USB port to my kdc-mp435u anybody know where to solder it in on the board? Thanks,Chuckers
I solved my own problem.1 I removed radio face 2 I removed back cover of radio face to expose USB solder joints.3 I drilled a hole in the back cover of radio face over solder joints 4 I drilled a hole in front cover of radio behind face plate and lined it up with hole in back cover of face plate.5 I cut the male plug off of a USB extension cord and ran it through factory notch on the back of radio,through drilled hole on front panel of radio, thruogh drilled hole on back cover of radio face and soldered wires to back side of USB plug in. Wire colors from top to bottom are Red, White, Green, Black. Solder sheild to any of the three larger solder joints next to these connections. Make sure wires are not touching any other connections. Put radio back together and add screw that locks face to radio. Face can no longer be removed with this wire added. Now I can plug in my 8gb memory stick,hide it under the dash and have a clean looking installation.
Posted on Feb 01, 2008
Tips for a great answer:
Oct 09, 2010 | Kenwood KDC-MP435U CD Player
Dec 10, 2009 | Kenwood KDC-MP435U CD Player
Nov 25, 2009 | Kenwood KDC-MP435U CD Player
Sep 14, 2009 | Kenwood KDC-MP435U CD Player
Jan 03, 2009 | Kenwood KDC-MP435U CD Player
Oct 20, 2007 | Kenwood KDC-MP435U CD Player
356 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: