Question about Kenwood KDC-MP435U CD Player

1 Answer

Also how do i get the deck to stop say "CALL" ever time i start me call

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: also

Check the TEL mute wire(brown) properly insulated if you havn't connected any cell phone. If this TEL mute wire touches car metal body, there may be a chance to display "CALL" on the display.

Posted on Apr 23, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a jvc kdg431 radio/disc player. recently the speakers stopped working intermittently. They have now stopped alltogether. Ihave looked at the fuse on the back of the unit & that is ok .

I have had this problem before. The first thing you have to do is fade the deck all the way to the rear. Now turn the deck off and than back on see if you have sound now? IF not fade the deck all the way to the front and turn the deck off and than back on see if you have sound now? What you are doing is checking for a bad speaker because if you have a grounded speaker it will shut off the decks internal amp. You can do this though out the left and right as well to find if is a that. Now if nothing you do helps you might have to replace the deck. IF you want to get carried away you can check the OHM,s on each speaker and check each speaker to a ground with an OHM meter and if you have any speaker that shows a speaker lead that shows a ground start chasing that wire and see if it has a screw through it. Go all the way to the speaker. You will probably find a bad speaker that has shut off you system ?

Jan 01, 2015 | JVC Car Audio Receivers

1 Answer

I cannot get the auxiliary to work on my kenwood kdc- mp235, what do I press to make it work

Most head units come w/ connections for both auxiliary units (for an amp, etc) and the line for the power antenna. in the past when my deck would stop sending a signal via the auxiliary, I would simple use the power antenna. It pretty much just lets the amp or whatever know when to turn on. Separately however, most newer decks have a way to turn off the auxiliary via the menu settings. I might start w/ that if your kenwood happened to be a newer deck.

Aug 28, 2010 | Kenwood KDC-MP235 CD Player

1 Answer

My car stereo won't stay powered on.....

your constant power is not working only your ignition power is

Mar 31, 2010 | Car Audio Receivers

2 Answers

Will not stop opening and closing

sounds like a logic glitch . the last time i saw this the customer tried resetting. it worked ok for a little while but he ended up buying a new deck because the problem never went away

Feb 08, 2010 | Dual XD-7500 CD Player

1 Answer


you may have a shorted speaker or speaker wire. if it is not that then you probably have a bad output ic

Jan 20, 2010 | Kenwood KDC-MP235 CD Player

2 Answers


I have the same deck. replace the flex ribbon to sub panel. It's a problem with this deck. I've replaced the rear panel ribbon numerous times as well as the front panel ribbon.

Jun 18, 2009 | Pioneer DEH-P9600MP CD Player

1 Answer

Amp or Stereo Cutting out...

I agree with what you think it might be. I really think its the deck that is bad and you should be able to take it back for a new one. Have you tried unplugging the RCA cables to the amp to see if that stops it? That would tell you if the amp is backfeeding or doing something weird.

Mar 02, 2009 | Dual Car Audio Receivers

2 Answers

Tuner increments

those are odd numbers you decribed there
i understand what your saying to get the even numbers you have to use the remote and single click to what you want and if you want to stop a seek for frequencie hit the button back
you know foward select for scan and then back button for stop and then single press in what you need it takes a little fenness to control for even even numbers you just have to stop scan and seek single taps at a time

Jun 08, 2008 | Pioneer DEH-1900MP CD Player

1 Answer


This is often caused by a shorted speaker wire. If you have a pinched or loose speaker wire that's touching metal, it will cause the deck's internal amplifier to shut off. If you have a multimeter available, disconnect the deck then check each speaker wire for continuity with the chassis ground wire. If you don't have a meter, you can disconnect all the speakers, then connect them again one at a time. See if you can tell if there's one speaker that kills the deck's output.

Jul 28, 2007 | Pioneer DEH-P9300 CD Player

Not finding what you are looking for?
Kenwood KDC-MP435U CD Player Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4679 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides