Black pictures kodak dx4530 - Kodak EasyShare DX4530 Digital Camera

Your DX4530 has encountered a system failure, needs to go to shop.

Perform a power resetting and check the operation.

user guide:
http://support.en.kodak.com/app/answers/detail/a_id/18504/kw/dx4530

accessories:
http://support.en.kodak.com/app/answers/detail/a_id/18379/kw/dx4530

The problem is with the software in the camera! So take your camera to the nearby service center and do a format of your camera! That will fix your problem. Also check whether there is any problem in ur LCD screen!

no image formation,may be shutter/ccd.Chaque both,replace the defective.

The camera is not recommending the picture, It could be overexposed, shaky or taken in the wrong SCN.

Make sure that you are installing a fresh/ full charge battery
Remove the battery
Clean the metal contacts on the battery using a clean cloth

Pls. use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Pls. take the batt out for longer than 10 sec and reinsert.
This will reset cam. settings.

Alt. adjust the ISO.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

No unfortunantly this is the mechanics of the camera.
DX4530 is no longer repaired by KODAK due to lack of spear parts.

However thay do offer a Trade up option where you can trade your existing camera for a favorable price to a Brand new model.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

This is a workshop repair job at Kodak or a new camera.
Usually these devices are not economic to repair.

CCD failure most likely. Format the card then try again or a new card. Kodak customer support for more info