Question about Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

2 Answers

Bissell vaccum problem

My bissell vaccum will pick up stuff but all the sudden has started making a very loud noise that is not normal, whats the problem , how do i fix it?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 53 Answers
Re: bissell vaccum problem

Hi mandilyn,

underneath your vaccum there is a brush that rotates round maybe stuck with bit`s of carpet turned round your brush just remove it by cutting with something sharp that should free your brush and your vaccum should work fine.

Posted on Jan 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers
Re: bissell vaccum problem

Could be plugged, check the hose and at the bottom by the brush roll, the inlet maybe clogged. Also check the filter under neath the dirt tank. There are filters above the dirt container, clean those out. If after that it is still loud, then maybe the motor fan or bearins are bad and will have to be replaced, part #2031214 sells for around $55.

Posted on Jan 17, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

MY Bissell vacuum cleaner clearview makes a loud noise...what could be the problem?

first thing is check the filters. then call Consumer Care at 1-800-237-7691.

Oct 16, 2014 | Bissell 1699 ProHeat Clear View Upright...

1 Answer

Bissell 6591 operating twice as loud as before.

Hey Mike! Excessive noise can be contributed to dirty filters or clogs. Here's a quick link to troubleshooting steps to assist you.

Feb 03, 2013 | Bissell 6591 Power Trak Revolution Bagless...

1 Answer

My bissel vaccum got very loud all of the sudden

Your belt may be broken, your dirt cup may be full, or you may need to clean your filters. Look at these areas and you can find addional troubleshooting at this link (just select the type of vacuum you have in the dropdown menu):

Jan 07, 2012 | Bissell 3576 CleanView II Bagless Upright...

2 Answers

Vacuum sounds like an airplane after 1 year of use.

the motor bearings are starting to fail most likely. You can diagnose the source of the noise by removing the brushroll and belt, could possibly be the brushroll bearings but if you still get the noise when the belt is off its the motor.

Jan 07, 2010 | Bissell 6594 PowerForce Bagless Upright...

1 Answer


t could be 1 of 3 things:

1. The belt2_bing.gif that drives the beater bar.
2. An impeller that has a broken wing or 2, throwing it off balance.
3. Or, the bearings in the motor are going out.

Hope this helps,


Please Rate this Solution: THANKS

Dec 01, 2009 | Vacuums

2 Answers

It makes a very loud noise and doesnt pick up much

When they make noise like that there is usually an issue with the drive system (the belt and roller brush). I would try cleaning off the roller brush and putting a new belt on. You can access the roller brush and belt by turning the vacuum over so the brush faces up. There is a cover plate over the roller brush which can be removed by removing the (4) phillips screws. with the cover plate off, you can remove the brush and old belt. clean the brush off really good and put it back with a new belt. This is normal maintenence for this model and should be done every 6 months.
You can get the replacement belt here:

Oct 24, 2009 | Bissell 6594 PowerForce Bagless Upright...

1 Answer

My Bissel Vaccum cleaner is making strange noise!!

call the 1-800 number on the back

Jun 11, 2009 | Vacuums

1 Answer

I have a Dyson vacuum cleaner ...upright....all of a sudden my vacuum started making this awful a loud buzz...but only when I have it on carpet....when I have it on "floor" mode it's...

it may just be, that on carbet the brushes make noise that you dont hear on woodfloors.
If there is a hights adjustment, set it higher for shaggy carpet and lower for berber.

Mar 16, 2008 | Vacuums

Not finding what you are looking for?
Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum Logo

415 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts


Level 3 Expert

18257 Answers

Roger Potts

Level 3 Expert

694 Answers

Brad Brown

Level 3 Expert

13313 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides