Question about Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

1 Answer

Replaced lamp still not working

I replaced the lamp, the TV came on but went out in about 15 minutes with all three lights blinking. DLP 61 inch, TV will come on but will go out in about 15 minutes.

Posted by on

  • Anonymous Mar 22, 2014

    how many lamps are in a 61 inch samsung projection tv built in 2004

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Power issues (Tv True True (``````````` (``````````` 0 95250 95250 Replaced lamp still not working - clip_image002.gif not turning on) were typically due to faulty ballast. While the TV reports a bad lamp it is the ballast itself causing the issue. Samsung True True (``````````` (``````````` 0 95250 95250 clip_image002.gif is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having issues.

Posted on Jan 16, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

First when I turn it on it's okay for a few minutes ,then it starts to flicker and shuts off.Three lights are on Standby/Temp/Lamp Temp and Lamp lights are blinking.


Try unplugging the TV. Remove the back panel and vacuum the dust out. Sounds like the unit may be overheating and the thermal shutoff is operating to prevent fire. Be careful not to move the projection lenses out of alignment. It is also a good time to clean those lenses carefully. It will improve your picture a lot.

Jun 10, 2015 | Samsung HL-S6186W 61-Inch DLP HDTV

2 Answers

Samsung hln617w dlp tv won't turn on. Red temp


Had similar problem. Thought it was the lamp. Examined old lamp but it appeared to be good. Ordered a new one anyway. Changed the lamp but the TV screen would not come on. It would make the usual noise as it was going to come on normally but it would cycle 3 times & then turn off. The LED lights in the front panel would indicate a defective lamp. Then read about the ballast. Changed the ballast & still same problem. Tried starting the TV without the lamp installed & noticed that the color wheel did not spin. Removed old color wheel & discovered it was broken. This appears to be the cause of all of my problems. I wish I new earlier of the test-turn on the TV without the lamp being installed & check to see if the color wheel is spinning. Would have save money on the lamp & ballast.

Apr 08, 2010 | Samsung HLN617W 61" Rear Projection HDTV

1 Answer

I own a Samsung HL-R5067W 50'' DLP. Set is about 3 years old. Recently I heard a loud pop while viewing, picture distorted, but never went blank. I turned set off. When turned on again a loud whining noise...


Check your color wheel. There is a DIY guide for replacing the color wheel. Mine did the same thing yours is and my color wheel was all busted up. Unfortunately after replacing the color wheel my set continues to do the same thing, but this could mean I need to replace the ballast as well.

Sep 20, 2009 | Samsung DLP HL-P5663W 56" TV

3 Answers

Samsung DLP TV time, temp and lamp lights blinking... won't turn


Les,
I'm not a TV repair guy but my owners manual states that when all three LED's or lights on the front of the TV are flashing, that the lamp needs to be replaced. Might want to look into this. Good luck!

Greg

Aug 30, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

No picture on my samsung 61" dlp.


The color wheel if bad enough, will cause the lamp not to light. If the lamp is truly bad, you can't usually tell by just looking at it unless of course it is broken.

May 18, 2009 | Samsung 61" Slim-Depth DLP HDTV

2 Answers

Power button blinks green about 1 minute then goes red


There is an additional problem,

if the bulb had been replaced by a technician, call them back and ask for additional support, since they did not fix the problem.

Oct 15, 2008 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

Samsung 61" DLP 3 Blinking lights.


all 3 lights blinking means lamp has a fault the service manual says replace the lamp. If you need the service training manual for that model let me know and I will post the link as the training manual has excellent trouble shooting breakdowns for that model DLP

Mar 26, 2008 | Samsung HLN617W 61" Rear Projection HDTV

2 Answers

Samsung HLS4266W 43" dlp


Power issues (Tv not turning on) were typically due to faulty ballast. While the TV reports a bad lamp it is the ballast itself causing the issue. Samsung is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having issues.

Dec 24, 2007 | Samsung DLP HL-P5663W 56" TV

Not finding what you are looking for?
Samsung HLN5065W 50" Rear Projection HDTV-Ready Television Logo

490 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...