Question about DVD & Blu-Ray Players
My dvd recorder is 1 yr old sadly now it wont record onto dvd from hard drive or direct from tv.
can you help
SOURCE: TOSHIBA RDXV45KB
This is a disc read problem the discs recommended in the manual seem to be the only discs that will work on this machine.
I was getting the same error code everytime but the disc that i know does work is a Verbatim 16X DVD-R.
These discs work in all situations on my machine , dubbing and direct from TV.
Posted on Nov 29, 2008
Yes, you can, I have this unit and have actually copied a dvd to a vhs and then copied back to a dvd as I wanted a dvd copy to give a friend. The directions in the book are really quite simple. They tell you how to set the vhs to the spot where you want to start copying, etc.
I have not yet tried copying my family vhs tapes, but don't see a problem, just a big project. Good luck.
Posted on Jun 15, 2009
menu--hdd playlist--ok -select recording--select play then scroll down to dubbing--ok --add or scroll down to start dub.
Its not a problem
Posted on Jan 15, 2010
You FIRST need a way to get the Signal, INTO the laptop, you need to get a USB to TV/Video Dongle, Now using this and the software that came with it, as well as other software, You Hook up the OUTPUT from the DVD Player, to the Video Input on the USB Dongle, Either, Component (Best) or Composite, (OK) Video, and AV Audio, and set to "Record" on the PC, and "Play" the DVD and then the PC will "Record" the incoming signal from, the DVD player, to the HDD in the PC. Once digitised, and saved it can be manipulated, any way you want.
Now if you want to do the REVERSE IE: Take a signal FROM the PC, to the DVD, then you simply setup the DVD as a Second monitor, use a TV to set it all up, once it is all working on the Laptop and TV, simply swing the Output, away from the TV's Input, to the DVD's Input,and select record, the PC, will then output whatever, to the screen, and whatever is displayed on-screen, will be recorded by the DVD's hard drive.
You First though must setup the PC to have multiple monitors, it is best to get the most up to date drivers and install them in the PC. FIRST. Go to this MS link below it shows you how to set u,setup as CLONE mode, I think will be best, also don't set initial resolution too high to start, set it to say 800x600 32 bit, to start, and work up, until your TV complains and stop. As related once setup, swing the PC's output to the DVD, and record.
Posted on May 08, 2010
Tips for a great answer:
Dec 03, 2013 | DVD & Blu-Ray Players
Nov 18, 2010 | Philips DVDR70 DVD Recorder
Apr 05, 2010 | Daewoo DVRS05 DVD Recorder/VCR
Dec 07, 2009 | Daewoo DVD & Blu-Ray Players
Aug 23, 2009 | Samsung DVD-VR320 DVD Recorder/VCR
Jul 03, 2009 | Daewoo DVG-8500N DVD Player
Apr 27, 2009 | DVD & Blu-Ray Players
Oct 03, 2008 | DVD & Blu-Ray Players
Jul 22, 2008 | DVD & Blu-Ray Players
36 people viewed this question
Usually answered in minutes!