Question about Nintendo Wii Console

2 Answers

Cant get pass the "press A button" screen

Uhm i got a problem with my wii i tried i got a power down in my room when i was playing on my wii when i tried to turn my wii on after the power down i get a screen that says
"Press A"it says in all langueges but my wii wont response i tried to change battery sync tried my other controller but my wii wont response

Posted by on

  • 2 more comments 
  • Anonymous Feb 24, 2008

    i turn my wii on but i try to turn my controller on and it wont work. i tried the same things but it wont work

  • slortmann Sep 06, 2008

    Can't get past "press A" dialog. changed batteries, tried other controller, turned off Wii and back on again....do not get crosshairs on screen, checked all jack inputs by removing and securily plugging back in.

  • haileyracing Jan 18, 2009

    i am having the same problem can't get pass "press A button".

    what do i do next?

    haileyracing@yahoo.com

  • Anonymous Mar 28, 2014

    THE WII CONTROLLER IS FREAKING BROKE AND I NEED THE INTERNET (YOU) TO HELP. thank you.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Make sure your light bar is plugged in and in sight

Posted on Jan 16, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Do they have batteries? if there is hold on to the wii system's sync button for 15 seconds. then try to sync them

Posted on Jan 17, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We were playing a game and the tv screen went black then we ejected the game and the wii console will not shut off and now it wont play a game or nothind then we tried to unhook it and the light stayed...


Power light is green or orange - TV screen is blank
    If the power light is green or orange and your screen remains blank, follow these steps.
    1. Completely power down your system by pressing the power button for 10 seconds. If that doesn't work, unplug the AC Adapter from the Wii for a moment, then plug it back in.
    2. Make sure your Wii console has the most current Wii system menu. Download the latest update (how to), and then test your Wii console to determine if the problem has been resolved.
    If you continue to experience this issue, there is a problem with the Wii console and it will need to be repaired.

Jan 27, 2011 | Nintendo Wii Console

4 Answers

Cant get pass the "press A button" screen


Turn off for a moment, try again, reconnect your controller.

Since its brand new, you can get it replaced if that doesn't work, dont waste your energy on it, just get another one, free replacement / warraty. Im sure.

Sep 05, 2008 | Nintendo Wii Console

1 Answer

Wii problem - Can't get past Select Language screen


keep getting a error has occurred,press eject button and remove the disc,then turn wii console off and refer to manual cant get past this.

Dec 25, 2009 | Nintendo Wii Console

1 Answer

Its Not Passing The "push A Button Screen"


Some gamecube controlers dont work

Aug 30, 2009 | Nintendo Wii Console

1 Answer

Wii Remote Problems!!


This is factory default with the Nintendo Wii, Try simply removing the batteries when done, OR!, which I do, is hold my hand over the top of the WiiMote and then press the power button, this prevents the Wii from getting the remote's instruction to power down, the remote thinks the Wii got it and then shuts down. Good Luck!

Aug 16, 2009 | Nintendo Wii Console

2 Answers

WII remote not working properly


Try this. It just worked for me. I actually didn't have to synch. After I unplugged the console and restarted, it worked.

    Try these steps!

  1. Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.

  2. Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

  3. After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:

    1. With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

    2. Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

    3. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).

    4. When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).
    5. This sync procedure (steps "a" through "d" above) must be followed for each additional Wii Remote added to the system.

Dec 30, 2008 | Nintendo Wii Console

3 Answers

Cant add a controller


I had the same problem and called Nintendo support. They had us unplug the wii console for 30 seconds, plug it back in and start the system back up. BEFORE pressing the A button on the health and safety screen, we needed to take the battery cover off of one remote, press the red sync button, then quickly press the sync button on the front of the wii console (in the front - you have to open the flap). Once the single blue light was on at the bottom of the remote, do the same with the other remote (press the sync button on it and then on the wii console). Then the second blue light should be lit on the second remote. Hope that helps!

Nov 29, 2008 | Nintendo Mario Kart (Wii) for Wii

1 Answer

My wii is not working


If it's orange that means it is turned off. It turns green when you turn it on. Insert a disc, press the power button or hit eject.

Aug 03, 2008 | Nintendo Wii Console

14 Answers

2nd wii remote will not connect with mario play 8


We had this same problem so I did a google search for 2nd wii remote not connecting or staying connected and this is what we came up with and did this and it really works! So hopefully this will help all of you to. Good luck! K and M

This is from www.nintendo.com/wii :

Wii Remote not being recognized by the Wii Console (lights on the Wii Remote flash when you press a button, but then go out) - Most Common:
Getting the Wii console to recognize (or "sync" with) a Wii Remote, especially one that did not come in the box with your Wii console, may require doing a few additional steps before it can be synced. Additionally, a Wii Remote that was working, but is no longer being recognized (or has "lost its sync") may need to be re-synced. Please use the troubleshooting steps listed below, which our experience has shown can solve many Wii Remote issues.
http://www.nintendo.com/consumer/systems/wii/en_na/ts/wiiremote.jsp
    Try these steps!
  1. Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.

  2. Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

  3. After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:
    1. With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

    2. Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

    3. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture below).

    4. When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

    5. This sync procedure (steps "a" through "d" above) must be followed for each additional Wii Remote added to the system.

wiiremotesynchstandard.gif

Dec 23, 2007 | Nintendo Wii Console

Not finding what you are looking for?
Nintendo Wii Console Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Raj Patel

Level 3 Expert

917 Answers

Julian Wainwright

Level 2 Expert

64 Answers

Zhenya Ogorodnikov

Level 2 Expert

218 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...