Question about Vacuums

1 Answer

Hoover Savvy Model U8181-900 Rewiring

The circuit board on my Hoover Savvy is burnt. The cleaner still pulls a vacuum, and the motor was running prior to shutting down due to the circuit board burning, and the wiring (except for melted connector) is intact. My question is this: can I bypass the circuit board sacrificing the led lights (clean/dirty, etc.) to get the brush motor running again?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

The brush roll motor is most likely what caused the problem to the circuit board. You would look at about $100 or so for the 2 parts.

Posted on Jan 17, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Hoover Savvy Brush only runs when the vacuum is moved backwards


That is brobably a bad wiring, that lose contact when you move the hoover forward. The wirings should be checked, here is some schematic:
Wiring Schematic :
7d3a1ec.jpg

Oct 22, 2008 | Hoover U8185-900 Upright Vacuum

2 Answers

The vacuum turns on, but the thing with the bristles doesn't spin. Help?


no it can't be bypassed the motor is dc.the circuit board converts it from ac to dc

Apr 12, 2009 | Hoover U8145-900 Savvy Bagless Upright...

1 Answer

I HAVE A HOOVER SAVVY AND THE BRUSHS WON'T TURN.


there is a small circuit board right above the motor on the base ,look and see if there are any burn marks or discoloration.if the headlight isn't working either then thats the problem .the circuit board.you can get it through all-type vacuum and janitorial 314-275-8006 supply.$18.49.there is a belt that runs up the center from the roller to the geart on the motor

Apr 01, 2009 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

A noise coming from the motor when I`m ready to vaccum


if it were m i would take it back and insit on a new one.something new shouldn't have to be fixed thatd why we buy it new

Dec 31, 2008 | Hoover U8145-900 Savvy Bagless Upright...

2 Answers

I have a Hoover Savvy Bagless Upright. The beater bar does not turn. It does not appear to be the belt.


The Savvy has a brush roll motor, whcih could be bad. There also is a circuit board near the brush roll motor, a circuit board underneath the tool holder, and the switch asm. in the handle. Any of which could be the cause of the brush roll not turning. Just needs to be checked to find what is causing the problem.

Jun 11, 2008 | Vacuums

1 Answer

Hoover savvy no suction on carpet setting


Check to make sure you hear the vac. motor is running when in that position. The switch in the handle could be bad if it is not.

Apr 29, 2008 | Hoover U8145-900 Savvy Bagless Upright...

1 Answer

Hoover Savvy runs but has a burning smell...


Could be that the motor went bad, or one of the circuit boards is bad. The brush roll motor is the likely suspect.

Apr 14, 2008 | Hoover U8171-900 / U8172-900 / U8173-900 /...

5 Answers

Brush will not turn and lights will not light


the problm is under the top cover of the base,there are some screws on the botton also remove the self adhiesive emblem on the top and remove the screw then the top will come off.ithink what you will find is a burnt circuit board that sets right above the motor

Aug 26, 2007 | Hoover U8171-900 / U8172-900 / U8173-900 /...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...