Question about Uniden Cordless Phone

2 Answers

Idect x1 cordless phone

My handset has just went dead,i can hear the phone ringing but can,t answer it.

Posted by on

  • Lindsay76 Jul 15, 2008

    My cordless landline is driving me mad. I cant seem to obtain a dial tone yet when I call the number from my mobile, the handset rings but I cannot accept the call, it just keeps ringing!! I have checked the jack, changed the connection wires and plug, tried de-registering and returning to default, yet still no joy!! PLEASE HELP!!!!

  • mariepaton37 Dec 14, 2008

    my idect x1 phone has went dead how do i get it back on help it is driving me mad


×

Ad

2 Answers

The cordless connected on ups rings periodically without being called

Posted on Mar 08, 2008

Ad

I have the same issue but cant find any info on it

Posted on Feb 25, 2008

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: out of range shows on main handset of cordless phone

Unplug the battery. Hold down The * (star) and the #(hash) keys simultaneously. Re-connect the battery, phone will beep and screen will be blank. Press the voicemail (righthand silver key under the lcd screen). As above EEPROM/RAM message will appear. Place handset on base and your problem is solved.

Posted on Jul 06, 2008

  • 1 Answer

SOURCE: UNIDEN 5.8 GHZ CORDLESS PHONES

Registering Handsets to the Base
Whichever handset you choose to charge in the base is automatically
registered to the base. Any additional handsets must also be registered to
the base before you can use them.
Be sure both handsets are fully charged.
One at a time, place each handset in the base. The charge/in use LED on
the base begins to flash, indicating the base is registering the handset.
Wait for at least five seconds, then pick up the handset and press
[talk/flash]. If the display shows TALK, the handset is registered. If not,
place the handset in the base to try again.
Press [end] and continue with the next handset.
Note:
Once both handsets are registered, it doesn’t matter which
handset is placed in the base or the charger.
When you charge the handsets, Caller
ID summary screen and the name of
the handset appears.

This can be find from uniden website.
http://www.uniden.com/pdf/DXAI4588-2om.pdf

Posted on Jul 08, 2008

divatif
  • 39 Answers

SOURCE: uniden 5.8Ghz phone.

You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.

Posted on Mar 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is answering machine volume too low?


Panasonic Cordless Phone - quiet volume - Phones - Gadgets - Whirlpool

forums.whirlpool.net.au > Gadgets > Phones

WhirlpoolJan 4, 2011 - We've just got a Panasonic KX-TG4393 Cordless phone ...objectID=4555), but the volume is extremely low and it's very. ... have a problem hearing messages on the answering machine. ... Looking for any suggestions too.

Panasonic Dect 6.0 4-Handset Cordless Phone with ...

www.amazon.com/Panasonic...Answering.../B001RTU...

Amazon.com, Inc.Panasonic Dect 6.0 4-Handset Cordless Phone with Answering Machine .... I do not mind the low ring volume because too loud rings bother me but I am listing ...

Panasonic KX-TG6445T DECT 6.0 Cordless Phone with ...

www.amazon.com/Panasonic...Answering.../B001P80...

Amazon.com, I

Jan 07, 2016 | Panasonic Lands Phones

1 Answer

When answering mode is on I do not want to hear the ringing(4x) tones before going to answering.I've switched off the 'call screen' option. still I hear the ringing although not recording at least.


Just set the ringing volume to off.
You can choose from four ringer volume settings (off, low, medium, and high) separately on each handset or the base.
With the phone in standby, press or on the handset or VOLUME or VOLUME on the base. The handset or base sounds the ringer at that level. Use on the handset or VOLUME on the base to make the ringer volume louder. Use on the handset or VOLUME on the base to make it softer or turn it completely off.
Note: If you set the ringer volume to Off, the handset or base won't ring. Other handsets or base will ring according to their individual settings

May 29, 2015 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Phone rings once, but then stops ringing and I can't answer the call


If you have a landline, most likely you have a short in it. Not enough to kill line, but, when the 90 volts a.c. comes in to ring it jumps short. The short answers the phone.. It doesn't stop out going but can cause static. Check the line at the box outside. if bad there call your phone company, if good there, trouble is in house

Oct 03, 2017 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

How can I get the telephone on my Brother Fax T96 to work?


Step by step information at the link below.
Brother Fax T96
The F/T Mode is used to allow the fax machine and the telephones to share the same telephone line. When a call comes in, the fax machine and all extension telephones on that line will ring according to the number of rings you have set for the Ring Delay.
When the Ring Delay is completed, the fax machine will answer the call and determine if it is a fax call or a telephone (voice) call.
The fax machine can determine this by the signal it is receiving on the telephone line. If someone is sending a fax automatically , the sending fax machine will transmit a fax tone (a series of beeps every 3 seconds).
If your fax machine hears these tones, it will receive the fax.

If the fax machine does not hear any fax tones, it assumes it is a telephone (voice) call and will begin ringing the F/T ring tones (double ring) for the length of time you selected for the F/T Ring Time. These tones will only ring on the fax machine's handset (extension or external phones will not ring). At the end of the F/T ring time the fax machine will go into the receive mode in order to receive a manual fax.
(If the call was a voice call and was not answered, the caller will hear the fax receive tones also).
  • If you answer the call before the fax machine(during the ring delay period) and determine it is a fax, you can transfer the fax to the fax machine for receiving.

  • If you answer the call on an "extension" phone and hear a beep every 3 seconds (automatic fax) or silence (manual fax), press *51 or *91 for New Zealand (remote activation code) on the telephone keypad, wait to hear the fax machine turn on (chirping sounds) and then hang up.

  • If you answer on the handset of the fax machine and hear a beep every 3 seconds or silence, press the Fax Start or Start/Copy key on the control panel of the fax machine and then hang up the handset.

  • If you answer a call on an "extension" phone during the F/T Ring Time, you will hear the F/T ring tones.
    To release the call from the fax machine, press #51 or #91 for New Zealand (remote deactivation code) on the telephone keypad and you can speak to the calling party.

  • If you pick up the handset of the fax machine during the F/T ring time, you may talk to the calling party immediately.

Mar 28, 2011 | Office Equipment & Supplies

1 Answer

My phone rings, but when I answer I can't hear the person on the other end & they can't hear me. How do I fix this?


Can you hear them if you use the speaker not the handset? My be a bad handset or you could have Headset mode on. Default code for headset is infinity 317 or just 317

Mar 29, 2009 | Inter-Tel Intertel 6123300 GLX Executive...

1 Answer

Can't hear


go to the setting on the handset -> advanced-> reset
I think the default pin is 0000
It will restart. I had the same problem And find the solution somewhere else
I worked for mine
Good luck

Feb 01, 2009 | NetGear SPH150D SKYPE CORDLESS HANDSET IP...

1 Answer

No dial tone on my handset


when the phone rings just pick up the hand set and answer
if that doesn't work press the talk/answer button and answer

Oct 05, 2017 | GE 21008GE2 Dual-Handset Cordless...

1 Answer

I've lost my manual and need troubleshooting help


Our phone decides to call screen people so the answering machine goes on after 2 rings. We can't find the manual.

Dec 10, 2007 | Uniden TRU8885 Digital Answering Machine

2 Answers

Phone rings, but once answered its not possible to hear a voice.


Similar issue - brand new phone - but incoming calls (skype or landline) would ring - and then nothing, and outgoing calls the handset would just reset.

The handset would just lose signal constantly (less than 2 meters from the base station).

The phone shipped with the latest software - but eventually I reinstalled it - no change, then de-registered the handset, powered everything down and re-registered the handset and that *seems* to have done it .....

So
1 - reflash / re-install latest software from philips website (even if the phone already has the same version)
2 - de-register handset (follow instructions)
3 - unplug base station and remove batteries from handset
4 - turn on base station, put batteries in handset
5 - re register handset (follow instructions in manual)

and that seems to do it.

Nov 18, 2007 | Philips VOIP8411B/37 IP Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

Related Topics:

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8080 Answers

Cindy Wells

Level 3 Expert

5589 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...