Question about Projection Televisions

1 Answer

Aspect Ration for Panasonic TV

How do I change the aspect ratio on a 35in Panasonic tv, Model CT-35G25B

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Projection T... Master
  • 8,617 Answers
Re: Aspect Ration for Panasonic TV

Should be an option under the video menu for format

Posted on Jan 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to adjust aspect ratio on sony kdl-v40xbr1

To take advantage of the wide mode feature on your TV, Set the DVD players' aspect ratio to 16:9. For details, refer the operating instructions supplied with your DVD player. Aspect ratio must be set with DVD player. Not with the TV. OK.

Feb 05, 2012 | Sony BRAVIA KDL-V40XBR1 Television

1 Answer

The aspect ratio of my TV is set to16:9, however on some channels, the picture is not full screen?

That is probably due to the transmission or aspect ratio of a dvd etc and perfectly normal but annoying!
Try setting your TV to automatic aspect ratio, if it has one.
Happy New Year.

Jan 01, 2011 | Projection Televisions

1 Answer

Change the aspect ratio

you can set the aspect on either remote. the best thing to do is set the proper aspect on the tv remote for regular (sd) channels, and then again for hd channels. the tv should remember these aspect settings and revert to them when you switch back and forth from sd to hd. if you have satelite, there is usually another aspect on there you can change depending on the program, but i usually recommend leaving it alone. if you are on an hd channel with side bars, switch to the sd version instead of changing aspect so you dont have to keep flipping it back and forth.

May 26, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

I have only partial picture. top of screen cut off.

check the aspect or ratio settings
there is a button on the remote called aspect, ration, pic size, or something simmilar you need to push.
if you have satelite tv, it can also be the format button on that remote

May 21, 2010 | RCA P55000 55" Rear Projection Television

1 Answer

Cannot change aspect ratio of picture when ratio button is pressed on remote. Batteries in remote are good. Everything else on remote works. Sony KP-57HW40

If you are connected to a HD cable or satellite box, the aspect ratio is set by that box. If it is set for 1080i 16:9 wide screen mode then your TV is locked at that ratio. This is good considering you have a Hi-Scan 1080i television in the Sony KP57HW40. Please take a moment to rate my answer. Thanks...

Nov 24, 2009 | Sony KP-57HW40 57" Rear Projection...

1 Answer

How to adjust aspect ratio on Mitsubishi VS-6043 TV?

I have the same problem and the only thing I could do was to change the name of the input on your tv to pc on the menu screen and it should set it to 1080p reduced this will fit the whole picture and set your screen res on your computer to 1920x1080
hope this helps

Aug 01, 2009 | Mitsubishi VS-6043 60" Rear Projection...

1 Answer

Picture not to edge of screen

That is because you are watching the picture in the 4:3 aspect ratio. This is normal when you are watching a channel that is being broadcast in 480 or digital. But once you tune to a station that has 1080 or at least 720p which is true high def then the picture should expand to 16:9 aspect ratio. It will switch between the two automatically as it determines what type of signal it sees. You can force the resolution to change by pushing the format or aspect ratio button on the remote but you will lose picture quality.

Jan 11, 2009 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

My tv the picture is bigger than the tv screen

it sounds like you have hit the zoom button or your aspect ratio isnt right. the aspect ratio should be set to 16:9 (if there isnt a button for aspect ratio, change it in the menu) and there should be a zoom button on your remote and just keep hitting that and it should return to normal. If neither works, post your tv brand and model and i'll try to find another answer

Oct 20, 2008 | Akai PT4298HD Rear Projection Television

1 Answer

Xbox 360 game play screen is too wide. I can only see part of the game play.

make sure your tv is on the right aspect ratio, and not widescreen. find your remote and it should have aspect ration button on it, or it will be in the menu.

Sep 10, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

56836 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides