Question about Samsung CLP-510 Laser Printer

1 Answer

Colour balance The colour balance seems to be far too dark - cyan is too blue and magenta is too red. Adjusting the colour balance in properties doesn't seem to do very much???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 217 Answers
Re: Colour balance

Original Samsung toners,or 'remanufactured' or home refilled ??

Is the 'background' (ie what should be white) OK ??

Posted on Jan 17, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Colors not matching computer

It is possible your colour cartridge has cross contaminated the ink reservoirs. To check this take the colour cartridge out and turn it over to see the coloured pads. They should look red, dark blue, and orange ( the colours are actually Magenta, Cyan, and Yellow, but are concentrated). If any of the pads are pale or particularly green - change the cartridge.
If the colours look alright, your issue is probably that your monitor makes colour by emitting light frequencies so is bright, printed images make colour by absorbing light frequencies so will always be darker. There is always the issue of course that your monitor also has a colour "temperature" bias. Photo pros calibrate their monitors and printers to match.

Mar 25, 2012 | Canon PIXMA iP90v Printer

1 Answer

I cannot tell which colour of ink is finished

Make a word document with three words, one in magenta (red) one cyan (light blue) and one yellow the faint one will be the one running out.

Jun 18, 2011 | Printers & Copiers

1 Answer

Too much red

I'm assuming that the colour cartridge is a three in one. Blue, Yellow and Magenta.

When printing a colour document, the printer automatically balances colour mixtures from the three primary colours listed above. Should a print out be too red, its probably because its run out of yellow and/blue.

The best way to check is to print out a test page, you should get a block for each of the colours and black. If one's missing, there's your answer.

Apr 29, 2010 | Dell 922 All-In-One InkJet Printer

1 Answer

Canon pixma ip 4300 colour problems

If they are generic inks, sometimes the colors aren't quite right, also in your machine you can't use the photo inks, the photo magenta and photo cyan are not the right shade for your machine. You need plain magenta and plain cyan. Beyond that you may need a new printhead.

Oct 13, 2009 | Printers & Copiers

1 Answer

Epson acculaser c1100 ink replacement

K- black
M- Magenta (red)
Y- Yellow
C- Cyan (blue)

Hope this helps.

Jul 03, 2009 | Epson Aculaser C1100 Printer

1 Answer

Colour Ink Jet Cartridges emptying during a black ink print run

If you go to your printer properties, there should be a setting whereby you have to select the option to "PRINT USING BLACK CARTRIDGE ONLY". Make sure this option is selected, otherwise your printer will use ALL colors even if you only print black.
Let me know if you need any further assistance.
Best wishes,

May 07, 2009 | Epson Stylus DX6050 All-In-One InkJet...

1 Answer

Installed a new cyan cartridge, but the blues show up as pink..

I can assure you that you got a bad colour ink cartridge. However, you may try this: get a small ply of tissue paper and place over the printing head, with your mouth and some good measure of pressure **** it. Repeat a couple of times and all the three colours: cyan, magenta, and blue will show up; otherwise replace immediately. Good luck

Apr 30, 2009 | Xerox Phaser 6180N Laser Printer

1 Answer

Prints all yellow, with some blue and black, no brown

the problem is very simple the magenta ink the cartridge is over or the head is been blocked from where the magenta ink comes out,
because red colour requires ---yellow plus magenta(pink)----to make it red.and ----dark yellow plus magenta(pink) -------- for brown colour.

Nov 22, 2008 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

Refilled ink cartridges problem colour

this is not a printer problem, you have a problem with colour cartridge! u can fix this in 2 diferent way: 1. replace the colour cartridge with new one, or gently clean the nozzle cartridge with a wet tissue until the cyan colour mark a line on the tissue just like the others colours: yellow and magenta. maybe must repeat this several times.

Sep 13, 2008 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

My printer will only print in blues pinks and purple and black and white

ur printer prints in blues pinks n purple: its very simple :there r three prime colours in ur colour cartridge that forms all the other colour variation they are cyan, magenta n yellow. ur yellow colour in ur cartridge is either dried or empty thats the reason its not printing the colour variations which requires yellow. the solution is to either get ur colour cartridge refilled or replace ur colour cartridge. rate this solution as fixya n encourage us to help u solve ur problems in future too.thanks 4 using fixya.

Jun 12, 2008 | Printers & Copiers

Not finding what you are looking for?
Samsung CLP-510 Laser Printer Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts


Level 1 Expert

185 Answers


Level 2 Expert

166 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides