Question about Rinnai Toyostove Direct Vent Heater: Toyostove Laser 73 Shipping

3 Answers

Toyotomi laser 30 error code 6

My toyostove laser 30 is shutting of in the middle of the night and giving me an error 6. It will fire back up and be fine for a few days then do the same thing again. How can I fix this?

Posted by on

  • 1 more comment 
  • Williewombat Jan 17, 2008

    I have an SRE 177 which is similar and get E2 as well as E6 and it burns with a yellow flame.

    I wonder if it is the grade of kerosene I use or maybe the heater is set too low and does not do the cleaning cycle???????

  • Sweet Sissy Feb 10, 2008

    I been having the same problem with error 6 and I can not afford to hire a damn person to fix it. If you all find out what it is please email me at SylviaSPSS1976@aol.com

  • Sadie Black May 03, 2008

    I have a Laser 56 that finally stopped working and is giving me an Error 6. Previous to it stopping it was making a regular popping noise, a louder version of the noise it usually makes. The noise would come and go and vary in volume. It was loud enough to wake me up at night, though.

    I suspect due to the season (Spring) and the fact that my dogs are blowing coat, that there's dog hair where it shouldn't be.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I disarm the Toyotomy and cleaned ou everything, then error 06 dissapear...

Posted on Aug 19, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Make sure you don't have any additive in the fuel. These Toyos should never make a loud popping noise. No matter how long it has been since they have been tuned.

Posted on Dec 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got an EE30 error code.


I had an ee30 on my toyotomi 30 . The wirers for the igniter came off the igniter.

Oct 03, 2013 | Rinnai Toyostove Direct Vent Heater: Laser...

1 Answer

My Laser 30 keeps getting a ee 12 code ans shuts


Ken,

The screen for the circulating fan has lint on it. Remove it from the back top panel and wipe it off. The lint keeps the air from be able to blow over the stove and it overheats.

Good luck,

Tom

Feb 03, 2010 | Rinnai Toyostove Direct Vent Heater: Laser...

1 Answer

Don't know how to set my toyostove 73 laser?


READ owner's manual
If you don't have one you can get it on-line www.toyotomi.usa

Jan 15, 2010 | Rinnai Toyostove Direct Vent Heater: Laser...

1 Answer

E-14


rinnai is one brand name. toyostove and toyotomi are the same but different brand names. error is ee-14 - flame sense lockout.

Oct 20, 2009 | Rinnai Toyostove Direct Vent Heater: Laser...

1 Answer

Dumb Question


Mike,

NO, Rinnai and Toyotomi (Laser) are not the same. A simple Google search would make that clear. Now, a new blower motor with case for a Laser 73 comes complete. Fans, motor and gasket all put together, ready to plug in and go.

You would be better off contacting a local dealer for your parts. NO authorized Toyotomi dealer is supposed to sell parts over the internet. A Toyotomi dealership is a valved item. It is meant to help sell and service the Toyotomi product in the dealers local area. It is a great help for someone to be able to call his local dealer and have that guy come right over and help you out.

Saty warm,

Tom Hawkins
Bethel, Alaska
hawkins111@gci.net


Mar 06, 2009 | Rinnai Toyostove Direct Vent Heater:...

1 Answer

Exhuast smell(odor)


J,

If your Laser 56 is giving off fumes it is probably coming from the igniter gasket and the igniter guide gasket. The igniter gasket has broken and needs to be replaced with the new style. The new style cost about $12. The guide gasket is the fiber gasket around the hole the igniter goes in. It has seperated and all you have to do is smash it back together. If you have high temp silicone or furnace cement, you can use either to seal the crack. Any toyotomi dealer can get you the new igniter gasket # 17185580.

Good luck,

Tom Hawkins
hawkins111@gci.net

Feb 28, 2009 | Rinnai Toyostove Direct Vent Heater: Laser...

1 Answer

Shuts off


EE12 is an over heat condition. Clean the screen on the back of the heater and restart. Error code are explained on the lower left side panel.

Tom Hawkins
Bethel, Alaska

Feb 02, 2009 | Rinnai Toyostove Direct Vent Heater: Laser...

3 Answers

Does not extinguish


If your fuel was yellow it was #2 home heating oil. Toyotomi Laser heater run well on #1. Since yours in giving you a EE10 message you are going to have to open the burner and clean it, the blower and the heat exchanger. The air holes are blocked on the burner and it takes too long to burn the fuel up, EE10.
This is a dirty job but not that difficult. Try toyotomiusa.com/ and use their dealer locator. You should find a dealer in South Dakota that will be able to get you some gaskets you might need.

Good luck,

Tom Hawkins
hawkins111@gci.net

Jan 27, 2009 | Rinnai Toyostove Direct Vent Heater:...

2 Answers

Default temperature settings


if it is anything like a monitor - look on the right side bottom for a slider - reset temperature adjust. just move the slider to a lower temperature. if you have a power outage, the display starts to flash 88:88

Dec 15, 2007 | Rinnai Toyostove Direct Vent Heater: Laser...

1 Answer

Toyostove Laser 30 has error code EE 22


EE-22 means that the unit has tried three times to ignite. after this it goes into a "lockout" condition. remove the power and the computer will reset itself. it will then try to re-ignite. check for a fuel blockage, dirty filter etc. if there's water in your kerosene it will not fire! kerosene floats on top of water. bleed your system until you get kero and no water. use a gas additive to remove water. dry-gas will work. just empty the bottle's contents into your tank. on your computer type in toyostove error codes. this will take you to toyo's site and explains the error codes.

Oct 20, 2007 | Rinnai Toyostove Direct Vent Heater: Laser...

Not finding what you are looking for?
Rinnai Toyostove Direct Vent Heater: Toyostove Laser 73 Shipping Logo

2,864 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rinnai Heating & Cooling Experts

Paul Carew

Level 3 Expert

3238 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

vance jones

Level 2 Expert

120 Answers

Are you a Rinnai Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...