Question about Maytag Neptune FAV6800AW Top Load Washer

3 Answers

Maytag Neptune TL

I have "OD" message on my display. Do I need to replace left lock mechanism (part # 25001048)

Posted by on

  • 3 more comments 
  • Anonymous Feb 16, 2008

    od message

  • bgover Feb 23, 2008

    I have OD code what is the combination to reset the machine?

  • Dolphin5 Mar 23, 2008

    My washing Maytag Neputne Washing machine won't open. It is stuck in the locked position. It was washing and then we had a lightning storm. The electricity went out for a few seconds and now the machine won't wash clothes and won't unlock to get the clothes out. Is there a reset button I can push?

  • Anonymous Jul 04, 2008

    I keep getting  an OD message on my washer. I've tried opening the door as the book indicates, but it doesn't reset. What can I do?

  • Anonymous Jul 24, 2008

    od will not go off occassionally.what can i do to reset it.. I have tried unplugging it for fifteen minuted, Tryed setting the one hour timer, no results

×

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 96 Answers

The problem could also be with the reed switch which senses whether the lid is open or shut.Before replacing the door lock I would try jumping the door switch and see if the problem goes away.

Posted on Feb 24, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

Puy knife inserted at the outside cornes opens it up and you can play arround with them with you fingers try WD-40 to cur the sticky detergent residue and make sure they are connected. are you sure it didn't say OP?

Posted on Jan 17, 2008

Ad

This worked for me-with power on, "od" displayed, I opened the door. There are two plastic locking latches in the front; I gingerly pulled them out with a small screwdriver, and by jiggling the left one, the light reset and the machine works fine. Probably a little soap or grit on the contact.

Posted on Nov 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The Maytag TL lid lock was not unlocking. finally after repeated unplug-plug, etc. it unlocked. I snipped off the plastic hook on the washer (not lid) & now it won't go into the wash cycle. ...


Google this for a similiar issue of breaking the Left Hand Lid Lock.

lid lock assembly look for forum response by dh1200s.


You are going to need a complete L.H. Lid lock assembly. p/n 25001048 Google for best price.


You have the issue of the Lid Locks no releasing so even after a replacemant L.H. Lid lock assembly (not cheap) you have the root cause issue to troubleshoot.


If you want to troubleshoot Google this ""Neptune TL Washer FAV6800AWW"" a forum where I help owners of the FAV6800A and FAV9800A machines.


It's free because my time is free. I post as dh1200s at that forum and others as well as here. FAV6800AWDIY is my second account on this forum......Good Luck

Aug 28, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

OD signal goes on w/ neptune washer w/ lid closed. Technician said it needed control latch assembly ($105) and control board($221). Plus labor ($155). Are these easy to get and replace? Is all this...


OD error code is associated with the Left Hand Lid Lock.

If you want to troubleshoot and repair yourself Google this""

Neptune TL Washer FAV6800AWW""

That is a repair sticky where I have DIY support for FAV6800A or FAV9800A Maytag TL's.

You do not need a lot of mechanical experience just some guidance if you wan to save your 1$K machine.


Aug 04, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Lock light stays on the Neptune TL washer, doors won't lock, thus washer doesn't work. I did the board test that I got on this site, and discovered that the right door lock is working but the left isn't....


davebiros
I’ll try to help I’ll try to help looks like you are into some troubleshooting my kind of forum member.
The signaling for the Lid is latched the “Locked” Led comes from the Left lid lock here is the part number 25001048 and a link. I would start by removing the Left Han Lid Lock and inspect for corrosion as I go thru in this post.
See that post will get you started.
I discuss the “OD” error code but troubleshooting will start here with that Left Hand Lid Lock. The FAV6800A and FAV9800A have big time corrosion issues with that Lid Left hand Lid Lock with it location next to the Bleach Dispenser.
Some additional Pic’s to clean up the Slide Witch in the Left Hand Lid Lock.

407df6e.jpg
Let me know if I can help.........Rich

Jun 28, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

MY MAYTAG NEPTUNE MODEL FAV6800AWQ KEEPS DISPLAYING THE LETTERS OP


You have lost signaling thru the Left Hand lid Lock. The washer has not see the lid go closed thru the signaling with the magnetic reed relay in the Left Hand Lid Lock.


You could have a Lid Magnet out of position or severe corrosion. You can place a large magnet over the Left bumper like this and see if the OP error code clears;

fcda3a4.jpg


See this post for troubleshooting the OP error code Left Hand Lid Lock Troubleshooting I go over OD error code troubleshooting but you troubleshoot the issue the same way for the OP error code.

If the Lid Magnet is not out of position you may have an open circuit thru the Magnetic Reed Relay as shown in the Pics of this link Left Hand Lid Lock Troubleshooting.
The p/n for the Left Hand Lid Lock is 25001048
Some other handy links. The Service Manual for reference. Sears Parts Direct for reference..........Rich

Jun 24, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Maytag neptune tl code od


You have lost signaling from the Left Hand Lock. The washer has not see the lid go open thru the signaling with the magnetic reed relay in the Left Hand Lid Lock.

See if this post will help you Left Hand Lid Lock Troubleshooting

The p/n for the Left Hand Lid Lock is 25001048
Some other handy links. The Service Manual for reference. Sears Parts Direct for reference..........Rich

Jun 18, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Od code when trying to star


You have lost signaling from the Left Hand Lock. The washer has not see the lid go open thru the signaling with the magnetic reed relay in the Left Hand Lid Lock.

See if this post will help you Left Hand Lid Lock Troubleshooting

The p/n for the Left Hand Lid Lock is 25001048
Some other handy links. The Service Manual for reference. Sears Parts Direct for reference.


Rich

Jun 14, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Od keeps flashiong when I go to start the machine


You have lost Signaling from the left lid lock see this post for troubleshooting under my old nickname dh1200s. Or you can just try replacing the Left Hand Lid lock. p/n 25001048 Washing Machine Lid Lock - 25001048

The Service Manual for reference. Sears Parts Direct for reference.

Dec 28, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

I posted a problem with a Neptune top load washer


The lid lock is bad part # is left side  25001048 runs around $80,the problem tends to stem from the dispensers water and bleach work their way into the switch and I have never had much luck cleaning them out and getting them to work.. and that is left hand side as you are facing the machine. 

Sep 16, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

How do you replace left lid lock on Maytag Neptune washer


Problem may be with door switch and not the door lock. If you are able you could try to locate the switch and jump the two wires together to see if the od code goes away. Even if it works you should not leave it that way but get a new switch and replace the faulty one.

Feb 25, 2008 | Maytag Neptune FAV6800AW Top Load Washer

3 Answers

Maytag Neptune Lid Lock Replacement


I have replaced my right lid lock twice and the second one just went bad. The left one does not matter, only the right one tells the washer the lid is locked. I think the bleach cup is the problem, bleach corodes the metal contacts in the lock. Try removing the plug and cleaning the contacts. I am going to bypass this lock I am not buying any more parts for this unit!
People have reported replacing this lock several times in unser two years.

Aug 30, 2007 | Maytag Neptune FAV6800AW Top Load Washer

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

1,038 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

588 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...