Question about Goldstar GVR-E448 VHS VCR
It plays pre-recorded tape but won't do timed record, altho the VCR says it is recording.
First check how good / bad are your recordings. Take a current / recent recording done after this problem cropped up, and play it back on another VCR - maybe a friend's. If the recording plays back badly- showing the symptoms you described, then the problem is still dirty or worn out Video Heads. If the Recording plays back perfectly on the friend's machine, but plays back badly on your machine, I still suggest that you try cleaning the Heads one more time, and if the problem is not resolved, it is time to trash the VCR. One last question, you say that you have reset the channels. Are the reception channels' images clear? I may be able to give some more suggestions, based on this response.
Posted on Apr 17, 2007
SOURCE: vcr to tv connection
There are probably a couple of different ways to hook things up. One is you hook the VCR "in between" the indoor antenna & the set. Hook antenna to VCR RF/Ant In, then VCR RF/Ant out to the Antenna input on TV. Your VCR will then be able to record one channel, while you watch another on TV. To play back the VCR, or do any VCR setup, TV channel must be set to either channel 3 or 4. The other way is to use the Video & audio input/outputs on the VCR & TV. You will need the appropriate cable(s). Match the VCR video/audio outs with the set of inputs on TV. Video and audio out on the TV go back to the video/audio inputs on VCR. In order to view VCR playback, menu setup, you will need to select that input (line, aux, video 1 etc.) on the TV. This hookup probably won't allow the recording of a second channel while watching one. As regards the hft channels, I assume you live in an area where such is being broadcast. The TV can probably be put into a programming mode where it will scan for all available channels, and put them into memory, or they can be programmed manually.
Posted on Jun 15, 2007
Now one question - Do you want to record the TV program on the VCR or Movies from a DVD plater hooked to your HD TV?
Posted on Jan 11, 2008
Use only one box.
Connection should be:::Video Source(cable, antenne) connected to converter box:::::Converter box connected to VCR:::VCR connected to TV.
Try this connection and let me know how it goes.
Please rate this solution.
Posted on Mar 10, 2009
Tips for a great answer:
Dec 26, 2010 | Sony SLV-678HF VHS VCR
May 30, 2010 | Panasonic AG-DV2000 Mini DV VCR
Sep 01, 2009 | Goldstar VCRs
Mar 10, 2009 | Sony VCRs
Dec 30, 2008 | Sony SLV-N55 VHS VCR
Dec 06, 2008 | Goldstar GVR-DD1 VHS VCR
Jan 10, 2008 | Goldstar GVR-E435 VHS VCR
Dec 25, 2007 | Goldstar GVR-DD1 VHS VCR
Apr 17, 2007 | Goldstar GVR-E435 VHS VCR
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: