Question about Nor-Lake Norlake Refrigeration 4' x 6' Kold Locker Walk-In Cooler - 6' 7'' High w/Floor

2 Answers

Subzero 690 blinking service

I called a local place and they said to remove the compressor panel and clean it. How in the heck to your remove the panel?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Nor-Lake Master
  • 488 Answers

If condenser is clean, and everything seems to be working fine, most likely You will have a leak of freon(very slow usually) and 90% of the chance You will need to get quote to replace evaporator coils. Watch this video, might help to troubleshoot. Hope that helps.

Posted on Sep 02, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 828 Answers

Panel cover is spring loaded. Pull out the top and lift to remove.

Posted on May 07, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you install or change the water filter.


If you model Sub Zero 690 has a filtration system this is what to look for. Thanks John Tripp Appliance 911
Contact Me Here



Sub Zero 690 Service Manual
Sub Zero Installation User Manual
CONTACT INFORMATION Sub-Zero Customer Service:
800-222-7820
Website: subzero.com
E-mail Address: customerservice@subzero.com

Jul 07, 2014 | Sub-Zero 690 Side by Side Refrigerator

1 Answer

Where to buy a drain pan for the model 690


Depends on where in the country you are. Call subzero at 1 800 222 7820 and ask them who your local parts distributor is.

Dec 09, 2013 | Sub-Zero 690 Side by Side Refrigerator

1 Answer

I have a SubZero 690. Freezer is not working at all, Refrigerator is fine! Two different compressors or refrigertion units?


Hi, and no, you have only one compressor for this unit.It sounds as though your defrost timer is not working on the evaporator, stuck in the defrost cycle, and this is why its not freezing. It could be several different reasons the freezer stopped working. Check the fan in the freezer to see if its running.The defrost timer should be located behind the unit at the lower section. If this unit has a panel that is removable, you can take it off to find the timer and take a flat head screw driver to see if you can give it a 1/4 turn, as it may be stuck in defrost.While you are there, you will see the compressor, condenser fan motor, and condenser coil also. Clean this coil while your there and make sure the fan is up and running. If its not running, but the compressor is, the motor has failed. Take these steps and let me know the outcome.
Shastalaker7

Jun 07, 2011 | Sub-Zero 690 Side by Side Refrigerator

2 Answers

Subzero model 532 fridge not cooling well, freezer ok


Did u check condenser on the top behind the grill? If it's clean, check unit for evaporator freon leaking. Light....Possibly bad bulbs behind that plastic light cover or light switch - one of them located on upper portion of door frame.

Aug 28, 2009 | Sub-Zero 690 Side by Side Refrigerator

3 Answers

We have been getting service code 50 for our SubZero -- it;s a 690 model fridge/freezer. I cleaned everything however over last three weeks the error repeats. I reset the board by pulling power from the...


Error code 50 means excessive refrierator section compressor run. Possible causes include: dirty condenser, stopped condenser motor, faulty termistor or an evaporator refrigerant leak. If it is a refrigerant leak it usually shows up as frost or water driplets half way down on the back wall. Clear codes by holding the alarm button in for 15 seconds.

Aug 26, 2009 | Sub-Zero 632 / S

1 Answer

SubZero 690: Frost builds up on ice chute flapper door


you have a bad seal, Take a dollar bill and slide it in between the door seal and the frig. slide it up and down to see if if has drag on it. If you find places it dont touch loosen the screws and adjust the hinges till it fits tight. In some cases you might have to tweak the doors if they need it.

Aug 11, 2009 | Sub-Zero 690 Side by Side Refrigerator

1 Answer

Subzero 532 refridge cooling but freezer won't freeze


Unit has separate compressors and thermostat's. Clean the condenser, if it doesn't improve call for service, as there is a decent chance you will need sealed system work or defrost issue. If you need instructions on cleaning the condenser check subzero.com.also try advanceing the defrost timer as they mostly die in the defrost cycle. Behind the grille there will be a panel with a small hole in it with a screw above and below. Use a flat blde screw driver to turn the gray piece in th small hole clockwise a few clicks. If the freezer comes back on you will need to replace the defrost timer.

Jul 26, 2009 | Sub-Zero 690 Side by Side Refrigerator

1 Answer

Compressor area above refrigerator is getting very hot


Hi,


Check Thermostat.
Proper Cleaning/Defrosting of fridge and freezer.
Proper Placing and Distance from wall.
If your hand bear the body temperature of that specific area then its normal.
Contact technician to verify Freon pressure.


Best of Luck,

Regards:
Hassan

Jul 26, 2009 | Sub-Zero 690 Side by Side Refrigerator

3 Answers

Subzero 690 flashing EC and service


If you replace the fan and clean the coils, and the refrigerator STILL does not cool, then contact SubZero or a service provider for an evaporator coil replacement.  Units manufacturer before mid-2003 had copper+aluminum coils that would corrode and allow all of the coolant to escape.  The (should be warranty) replacement is all aluminum.
Note the freezer does not have this issue due to the lack of liquid water.

Feb 20, 2008 | Sub-Zero 690 Side by Side Refrigerator

8 Answers

690 SubZero Side-by-Side Fridge


You need to reset the controller open the door and press and hold the "Bell" looking symbol for 15secs then release it should go away let me know if that worked

Jan 26, 2008 | Sub-Zero 690 Side by Side Refrigerator

Not finding what you are looking for?
Refrigerators Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nor-Lake Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Are you a Nor-Lake Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...