Question about D-Link AirPlus DI-524 Wireless Router

1 Answer

One LAN port not working

One port (3rd) of my dlink di-534 router is not working - it has a slow intermittent blink but when connected to a PC nic, the PC will not pick up any IP address etc. I have moved a working device into that port and it then stops also so that eliminates dodgy set up and cable.
Is there a setting on the router I could check ??
All other ports are working just fine !!
many thanks
Margaret

Posted by on

  • margjt Jan 16, 2008

    Thanks for the very quick reply !! I suspected that might be the problem but was hoping there might be a geekly solution :-)

    I will follow your advise and get a switch to go with it

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 102 Answers

My guess is that this port is just plain old dead. When you really need an extra port you could consider picking up a cheap ethernet switch. Repairs are not done because of the time an money involved vs the cost of a new one. When it's still in waranty you could always return it to the shop. Ports are normally hardwired and not controlled by the software on these kind of routers.

Posted on Jan 15, 2008

  • You calling it a NIC is quite GirlieGeekly to :)
    It was a joy to answer a question where someone already used a brain and followed the basic steps of troubleshooting without shouting ' router port, no light card dead? help!!!!' ;-)

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do I need the power cord to my D-Link router to set up my computer?


From the port marked "Wan" on the back of the D-Link, install a lan cable to the cable/dsl modem.

Insert the lan cable from Dlink port labeled "1" to the PC.

The Dlink, cable/DSL modem, and PC should all be powered on.

I believe the router comes with a CD/DVD. Insert this into the PC to set up the router.

Be sure to read through your Dlink manual for additional instructions.

Dec 25, 2011 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Please explain how to connect LinkSys D-Link wireless broadband router Model No. DI-713P with Comcast broadband modem and Dell OptiPlex 360 Desktop? I am using Windows XP-Pro. Thanks, dana


What is Comcast Modem's Model?

if your modem is not a Modem Router:
here is the link where you can download the manual...Mid left of the web page.

http://support.dlink.com/products/view.asp?productid=DI-713P

if you have Modem Router?

Bridge your Dlink router by changing the IP Address of Dlink Router and connect it wired to the LAN port.

send me your email add so that I can send the instruction How to install.

Mar 20, 2009 | D-Link DI 713p (DI-713P) Wireless Router

1 Answer

Cant share internet using a router


Hi There, what model of dlink router do you have?
Also, Or just check the ports you have in your router, the internet should be connected to the WAN port and the switch and/or computers to the LAN port(s).
If the router is new by default you should be able to access internet by plug everything the way I told you.
Also, by default the router ip address should be 192.168.1.1, type that into your web browser address bar, then you will have access to the router admin web page were you can see the status page, there will tell you if you have or not access to Internet really. Maybe the problem is that the router have no access internet access at all.

Mar 12, 2009 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

D-Link DI-534 Starting up problems


Try resetting the router . Press the reset button for 10 seconds and after 10 seconds unplug the power cable but continue pressing the reset button for another 30 seconds after 30 seconds plug in back the power cable and continue pressing the reset button for 10 seconds and release it after 10 seconds.

try to open an Internet browser and type in 192.168.0.1 on the address bar. It should give you the DLink page. Once you have that configure your connection.

Jan 08, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Lan 4pc by nic card


You can simply use or buy a router. Router will automatically network your computers without any special configuration.

Dec 17, 2008 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

I currently use a cable modem to connect to the internet from my Imac. I have dlink wireless router that I used to have for my old pc so that my work laptop could connect. How do I install the dlink on the...


No need to install the dlink on the imac. All you need to do is connect the modem first the dlink. (Modem connected to Internet or WAN port of the dlink). Now if they are connected, your imac should be plugged in to port 1 of dlink, and your PC to port 2. That should do it.

Nov 18, 2008 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

Dlink Router not assigning IP to NAS


DI-624 (Update to FW 2.70+)

See: http://www.infrant.com/wiki/index.php/Hardware_Compatibility_List_-_Network_Switches/Routers#D-Link

Dec 28, 2007 | D-Link DI-624 Air Plus XtremeG Wireless...

1 Answer

Dlink Di-514 slow


hi,

 

Need to change teh MTU settings in your router.once you  will change it,, it will work

Oct 23, 2007 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

DI-624M has "limited connecyion" perhaps due to damage to its firmware 10/20/07


Hi,
          You need to upgrade the Dlink firmware,, that will do it.

Oct 21, 2007 | D-Link DI-624M Router (DI624MRE)

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2268 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...