Question about Sony PlayStation Portable (PSP) Console

1 Answer

PSP slim UND door hing problem

Dropped PSP slim and knocked pin hinge loose of UND door. Removed 2 screws from adjacent cover to see if I could remove and reset pin but couldn't loosen cover. Is there an easy way to reset hinge? Hinge and door don't appear broken just dislocated. Help

Posted by on

  • Stevo88 Jan 16, 2008

    I already looked for service manual online with no luck. I need shortcut to reinstall door hinge or sequence of opening case to reinstall door hinge. I already have screw drivers and am able to revove 2 screws on ouside of cover but that doesn't allow me to open cover. need more help.

  • Stevo88 Jan 17, 2008

    What? Probably clipped also? Doesn'y anyone really know?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,067 Answers

May need smal star tools seaes sells kit 9 bucks t4 t5 t6 t7 t8 to get in it to work ill look online for serv manel but u can brose too online for taking apart a psp slim ok

Posted on Jan 16, 2008

  • nick helpap
    nick helpap Jan 16, 2008

    proably cliped snaped togther un clip it out it seems

  • nick helpap
    nick helpap Jan 17, 2008

    im looking at it seems like it unclips if anything take screw out pop it up pry it smal flat head ok

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do a fix a Westinghouse fridge door that has dropped slightly


Hinge screws probably loose. Refrigerator doors have hinges screwed on the outside. The hinges allow for you to move door to be level, loosen screws, move door level and hold it there till you tighten screws. Sometimes the hinges are covered with a plastic piece that you pry gently up on to remove.

Jul 03, 2016 | Westinghouse Refrigerators

Tip

How to Reverse Your Refrigerator Door (Most units)


1. Remove the toe grille.
2. Remove top hinge cover if available. Trace around the hinge with a soft lead pencil. This makes the re-installation easier. Remove top hinge and lift door off the center hinge pin, and set the door aside.
3. Unscrew the center hinge pin using an adjustable wrench and save for reassembly. Ensure that the plastic washer stays on hinge pin.
4. Lift the refrigerator door off of the bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and loosening two outside screws enough to allow hinge and shim to slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove inside screw and install center hinge.
7. Remove two screws on bottom hinge with 3/8" socket wrench.
8. Install bottom hinge on opposite side with the two screws removed from Step 7.
9. Unscrew the bottom hinge pin using adjustable wrench. Move hinge pin to other hold in hinge and tighten with adjustable wrench.
10. Reverse door handles.
11. Move freezer and refrigerator door stops to opposite side. Before starting screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center hinge pin through center hinge into the top of the door. Close refrigerator door to help align hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hold plugs and move to opposite side.
15. Lower freezer door onto center hinge pin (if you have a separate freezer door).
16. Close freezer door. Have an assistant lift up on opposite side of the door while tightening screws to install top hinge.
17. Flip top grille and reinstall.
18. Plug in electrical power cord and turn refrigerator temperature control to center position. Adjust setting as needed.

on Oct 19, 2011 | Frigidaire Refrigerators

1 Answer

Doorhandle


for passenger side:
1. unclip screw cover 'center flap' of inside door opener plastic cover, flap is 3/8"x 3/8" (center of plastic cover)
2. remove phillips screw now showing
3. push fabric panel (edge of door opener plastic cover-at hinged end of chrome handle) to allow uncliping of edge of plastic cover (top rt & lwr rt (for passenger side) of plastic cover)
4. open chrome inside door handle to allow plastic cover to be removed-slide plastic cover toward rear, free end of door to remove cover
5. remove switch panel-gently pry with wide non maring pry bar (cover wide blade screwdriver using cloth) do rear of sw panel 1st (don't pry front edge)
6. slide switch panel toward rear to allow removal
7. remove large phillips screw under sw panel
8. remove the 2 plastic covers near top, hinge edge -use plastic spoon handles to encourage caps to pop off. May also require small screwdriver approx 1/8" in to complete pop off
9. remove the 2 phillips screws w/ captive washers
10. remove 3 phillips/hex screws along the bottom inside of door panel
11. on outside/rear edge of panel push the 2 center pins of each in about 1/8"-this allows the clip to be pulled out w/ pin pushed in
12. remove plastic cover (REAR OF SIDE MIRROR)-pull window edge up and back.
13. lift rear of door panel (not hinge edge) up allow hinge edge to pivot around lower pin in door (hinge edge)
14. remove the 2 rt edge "L" brackets (gently pry center plastic pin out) (note the color and replace as removed)
15. slowly peel the clear plastc away from the non hinged end to expose the plastic panel with 3 phillips head screws
16. remove the 3 screws and panel for access to door handle.
17. using access area now available unlatch the rod attached to exterior door handle (unclip plastic to rotate clip up to allow rod to slide out-toward hinged edge)
18. using access area now available remove rod from ext door handle from inside door area
19. remove the 3 -10mm head bolts
20. remove the ext door handle (bottom edge out first)
reverse order to replace door handle

Mar 24, 2014 | 2003 Toyota Avalon

1 Answer

SAFELY REMOVING DOORS FOR SHIPPING


Good Morning Jill,

I see that you are trying to remove the doors on your Frigidaire refrigerator, model# FRS23R4A, for shipping purposes. Below are the instructions you will need to follow for both the refrigerator and freezer doors.


DOOR REMOVAL INSTRUCTIONS:
If it is necessary to move the refrigerator through narrow doorways, follow these steps to remove the doors.
IMPORTANT: Before you begin, turn your freezer and fresh food controls to "O" and remove electrical power cord from the wall outlet. Remove any food from the door shelves.

1. Disconnect electrical supply.
2. Open both doors, then remove toe grille.
3. Close doors.

To Remove Refrigerator Door:

1. Remove top hinge cover screw on refrigerator door and remove cover.
2. Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced.
3. Remove top hinge and lift refrigerator door off bottom hinge pin. Set door aside.
4. Remove bottom hinge, if necessary.
5. Reverse this procedure to reinstall refrigerator door.

To Remove Freezer Door:

1. Disconnect water line coming from lower hinge of freezer door at connection located under front of freezer: Press outer ring against face of fitting, then pull to remove tube.
2. Remove top hinge cover screw on freezer door and remove cover.
3. Disconnect wiring harness connector plug at top hinge: place your thumbs on flat sides of each connector and bend both parts back and forth, then with firm grasp, pull both pieces apart.
4. Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced.
5. Remove top hinge, allowing wiring harness to pull through hinge and lift freezer door off of bottom hinge pin. Lay door down flat to avoid kinking water line.
6. Remove bottom hinge, if necessary.
7. Reverse this procedure to reinstall freezer door.

When both doors have been reinstalled, connect water line by inserting tube and push until mark touches face of fitting, replace toe grille and plug in electrical power cord. Turn both temperature controls to center position. Adjust settings as necessary. Hope this is helpful.

-Best Regards-
WP

Mar 14, 2014 | Frigidaire FRS23R4A Side by Side...

2 Answers

How do i fit the door on the other side


If you look at the opposite side of your refrigerator, you'll find one or more plastic covers which can be removed to expose mounting holes. You have to remove the doors from the current mounting position, remove the hinges and transfer them to the other side, install the doors and you're done

Jan 25, 2013 | Bosch Classixx KGV28323 Bottom Freezer...

1 Answer

Amana SXD23V refrigerator leaks water underneath the side where the refrigerator door is evey time I try to get water out of the dispensor. I found a plastic tube on the floor about an inch long then...


I believe your water line or the union nut just behind the kickplate may have come loose. Lets see if we can find a repair kit and get you going again. Depending on where the line is broken or leaking will depend on just how much you will need to do so if leaking at the union nut please disregard removal of door.
WARNING

To avoid risk of electrical shock, severe personal injury or death; disconnect power to unit before servicing, unless

testing requires power. Discharge capacitor through a 10,000 ohm resistor before handling. Wires removed during
disassembly must be placed on the correct terminals to ensure proper grounding and polarization.

sea_breeze_2.png Here are the instructions from the manual below.

1. Open door and remove all storage buckets.

2. Remove toe grille.

NOTE: Shut off water supply before performing Step 3.

Have a bucket ready to catch spillage from tube.

3. Loosen water-tube clamp screw. Loosen plastic

water-tube union nut. Pull water tube away from

union nut and through tube clamp.

4. Remove screw that mounts door closure to top

surface of bottom hinge.

5. Close door.

6. Remove screw holding top hinge cover in place.
Remove top-hinge cover.

7. Unplug wiring harness connectors. Remove ground
screw and ground wire from top hinge.

8. Remove top hinge and hinge bushing. Pull hinge and

bushing off wiring harness.

NOTE: Hinge shim is glued to top of cabinet and must

be left in place.

9. Lift door about 3 inches to bring lower hinge bushing

up, off hinge pin.

10. Set bottom edge of door on protective pad. Remove

hinge pin (with door-closure tab) from bottom hinge

bracket.
11. Reverse procedure to rehang door.

sea_breeze_226.jpg
For plastic tubing click HERE
and for a simple snap on coupling I want you to call to insure you get the correct size and snap on union.

  • 1-800-269-2609, 8 am to midnight ET, 7 days Repair Clinic are very helpful and friendly and will be happy to answer your questions. I also will be here to answer any questions you may have, Thanks, Sea Breeze
  • Jul 25, 2011 | Refrigerators

    1 Answer

    I have whirlpool A CLASS fridge how do i reverse the door


    • I cannot confirm weather your fridge had reversible doors as you listed no model but the standard for fridges that can reverse the door swing are changed by doing this -
    1. You will see little plastic covers on the opposite side where the hinges and handles are currently located now.
    2. There are some little clips that hinge the screws on the top and bottom of each handle.
    3. Remove these little covers with a small flathead screwdriver.
    4. Now remove the screws holding the freezer and refrigerator handles on.
    5. Now pop the screw hole covers on the side of the frig/freezer you will using.
    6. Now place and fasten with screws the handles on the other side of the frig/freezer door.
    7. Now remove the top freezer hinge first by removing the 3 screws on top.
    8. Now pull up on the hinge (save the spacer).
    9. Now pull up on the freezer door.
    10. Now remove the screws on the middle hinge.
    11. Now pull up and remove the middle hinge while holding the frig door steady (save the spacer).
    12. Now pull up on the frig door and set to the side.
    13. Now remove the screws on the bottom hinge (save the spacer).
    14. Now put the screw hole covers you removed from the other side in the screw hole exposed from the screws you just removed.
    • The switch
    1. Start with the bottom hinge and place it on the opposite side (don't forget the spacer).
    2. Place the frig door on the bottom hinge and the place the middle hinge in the hole at the top of the frig door.
    3. Fasten the middle hinge.
    4. Place freezer door on the middle hinge.
    5. Put the freezer door in it's natural position to make putting the top hinge on possible.
    6. Screw the top hinge in.
    7. Job complete.
    Regards, Tony

    Apr 30, 2011 | Whirlpool Refrigerators

    2 Answers

    93 silverado 2500need free online mechanical diagram of doors


    GM Full-Size Trucks 1988-1998 Repair Information Doors - REMOVAL & INSTALLATION

    R/V Series
    See Figures 1, 2 and 3
    If the door being removed is to be reinstalled, matchmark the hinge position.
    1. If the door is to be replaced with a new one, remove the trim panels weathersheets and all molding.
    efc6815.jpg

    Fig. 1: Door hinge-R/V Series
    1. If the door is to be replaced with a new one, remove the glass, locks and latches.
    2. If equipped with a wiring harness, remove the trim panel and disconnect the harness. Guide the wiring out of the door.
    3. Support the door and remove the hinge-to-body attaching bolts. Lift the door from the truck.
    4. Install the door.
    5. Perform the alignment procedures indicated below.

    3a1bddd.jpg

    Fig. 2: Door hinge components-C/K Series

    4ab81ea.jpg

    Fig. 3: Removing the hinge spring


    C/K Series
    1. On trucks with power components in the door, disconnect the battery ground cable.
    2. On trucks with power components in the door, remove the cowl side vent cover.
    3. On trucks with power components in the door, disconnect the wiring going to the door, under the dash panel. Feed the wiring through the door pillar.
    4. Cover the door hinge spring with a heavy towel. Using tool J-36604 or its equivalent, insert the blades of the tool between the spring coils and turn the barrel nut to compress and hold the spring. Remove the spring using the tool.
    5. Remove the lower hinge pin retainer.
    6. Using a plastic or rubber mallet and locking pliers, remove the lower hinge pin.
    7. Install a bolt through the lower hinges to hold the door while removing the upper hinge pin.
    8. Remove the upper hinge pin retainer.
    9. Remove the upper hinge pin.
    10. Support the door and remove the bolt from the lower hinge.

    To install:
    1. Position the door and install the bolt in the lower hinge.
    2. Install the upper hinge pin. with the pointed end up.
    3. Install a new upper hinge pin retainer.
    4. Remove the bolt from the lower hinges.
    5. Install the lower hinge pin with the pointed end down.
    6. Install a new lower hinge pin retainer.
    7. Using tool J-36604, install the hinge spring.
    8. On trucks with power components in the door, connect the wiring going to the door, under the dash panel. Feed the wiring through the door pillar.
    9. On trucks with power components in the door, install the cowl side vent cover.
    10. On trucks with power components in the door, connect the battery ground cable.
    ADJUSTMENTSee Figure 4 The holes for the hinges are oversized to provide for latitude in alignment. Align the door hinges first, then the striker.
    C/K series utilize hinges that are welded to the door and frame. No adjustment is possible except when replacement hinges have been installed.

    66b8749.jpg

    Fig. 4: Door adjustment check points
    1. If a door is being installed, first mount the door and tighten the hinge bolts lightly.
    If the door has not been removed, determine which hinge bolts must be loosed to effect alignment.
    1. Loosen the necessary bolts just enough to allow the door to be moved with a padded prybar.
    2. Move the door in small movements and check the fit after each movement.
    Be sure that there is no binding or interference with adjacent panels.
    1. Repeat this procedure until the door is properly aligned.

    R/V Series:
    Door edge-to-rocker panel: 6mm Door edge-to-roof panel: 5mm Door edge-to-rear pillar: 5mm Door edge-to-front pillar: 2mm
    C/K Series:
    Door edge-to-rocker panel: 6mm Door edge-to-roof panel: 6mm Door edge-to-rear pillar: 4mm Door edge-to-front pillar: 7mm Door front edge-to-fender: 5mm
    1. Tighten all the bolts to 26 ft. lbs. (35 Nm).

    Shims may be either fabricated or purchased to install behind the hinges as an aid in alignment.

    Hope this help, TY for using Fixya (remember comment and rated this). Good luck.

    Apr 01, 2010 | 1994 Chevrolet Silverado 2500

    1 Answer

    Best way to removed driver side door


    I have a 1994 Grand Caravan and have done this several times.
    1. Disconnect Negative side of Battery.
    2. Remove all screws.
    a. There are screw covers to remove first before
    gaining access to the screws. I use a pick
    driver.
    b. One in recess of the door arm rest. Round
    Cover.
    c. One is behind the door latch release. Pull/Hold
    open to gain access. Then remove the cover
    d. Two are located on the Map pocket. Round
    Covers.
    e. One is located up near the side mirror.
    f. One is located on the upper portion on the door
    handle. It has a square cover.
    3. Pry up and out the window/mirror adjustment cover and unplug the connection.
    4. Use a wide flat screw driver to carefully pry on the bottom then side edges of the trim panel to "pop" the retainers out of the door.
    5. Once all retainers have been freed: Lift up the door trim up off the upper ledge.
    6. Peel back (but do not entirely remove) the rubber/plastic watershield cover.
    7. Disconnect all wire connections to the door trim.
    8. Pry off the plastic retaining clip to the door handle metal bar and remove the "L" bar out of the plastic connector.
    9. Set the Trim Panel off to the side.
    10. Remove all wire holders from the door.
    11. Move the wires inside and towards the front lower access hole.
    12. Peel back the rubber wire guard between the door and the A-pillar frame.
    13. Pull out as much wire as possible out of the door and let hang..
    14. While someone else is supporting the door: (If no one can help: with the door fully open: use a jack and block of wood to support the bottom outer edge of the door
    a. I use a Breaker Bar or long Wrench
    Extention and Hammer or Mallet.
    b. Tap Up the Bottom Hinge Pin first.
    c. I also use a flat Screw to tap up the Pin Head.
    d. Remove the Bottom Door Hinge Pin.
    e. Remove the Upper Hinge Pin the same way.
    f. Make sure the Door is being held in place.
    15. Remove any left over wires out from the door.
    16. Carefully move the door away from the hinges.
    Good Luck!!
    If you have not replaced the Hinge Pins, and Guides, now would be a good time to do it!!

    Nov 14, 2009 | 1994 Dodge Caravan

    2 Answers

    Fridge door will not stay shut


    Glenn,

    Easy... The door alignment adjustment is done at the top hinge. Pull up a step-stool, then remove the hinge cover. Under there you'll see three screws, I think they're 5/16". Loosen these (since your door has dropped, they're probably already loose), then lift up on the door handle to align it with the other door... while keeping the door aligned, tighten the hinge screws (and put alot of torque on 'em to keep 'em from loosening in the future). Now just replace the hinge cover and your done!

    SG

    May 26, 2009 | Kenmore 5553 / 655532 / 55534 / 55539 Side...

    Not finding what you are looking for?
    Sony PlayStation Portable (PSP) Console Logo

    Related Topics:

    155 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sony Video Game Consoles & Games Experts

    Zhenya Ogorodnikov

    Level 2 Expert

    218 Answers

    shaun taylor

    Level 3 Expert

    1527 Answers

    juanmireles1

    Level 2 Expert

    219 Answers

    Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...