Question about One For All URC-3021 Remote Control

1 Answer

Codes need automatic code search

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers

Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC3021
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(For low price replacement remotes visit www.sparky-uk.com)

Posted on Jan 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program my RCA TV with a RCA remote and DVD/VCR that is a JVC


HI,
CHECK THE FOLLOWING LINK . ON SEARCH TAB TYPE RCA . YOU WILL GET ALL THE LISTED RCA REMOTE CODES AND HOW TO PROGRAM IT.
Electronics Equipment Repair Center

Jul 13, 2014 | RCA RCU403N Universal 3 Device Remote...

1 Answer

I cannot find the code for my Cielo hdtv 46" for AT&T Uverse even trying the automatic search. Model num is te46sif.


0038,0032,0036,0030. Try these codes. If you wish to get more information, check these links. Setup procedure, and setup code list to many popular remote controls are given. Pull up older posts.
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/

Dec 17, 2013 | Televison & Video

1 Answer

I have a daewoo tv and I'm trying to use a phillips universal remote but I don't know the codes can you help?


Try an automatic code search with remote. If you do not know how to program remote for auto code search then I would need model number of your remote to assist.

May 19, 2010 | Televison & Video

2 Answers

I need the codes for an ASDA remote control, model no: URC20-D1F


URC20 D1F

Set up by Automatic Search

1. Turn TV on
2. Point the remote at tv and Hold SET and TV buttons at the same time and keep pressed for 3 seconds.
3. The LED flashes and the remote control starts the automatic search.
4.The OFF signal is automatically sent to the tv from the remote control.
5. Once the TV switches off press any button except SET to stop auto search.
6. Switch your tv on using the POWER button.

May 09, 2010 | Universal Remote Control Remote Control

2 Answers

Need code for asda remote model#URC20-D1F for use with my sony tv


URC20 D1F

Set up by Automatic Search

1. Turn TV on
2. Point the remote at tv and Hold SET and TV buttons at the same time and keep pressed for 3 seconds.
3. The LED flashes and the remote control starts the automatic search.
4.The OFF signal is automatically sent to the tv from the remote control.
5. Once the TV switches off press any button except SET to stop auto search.
6. Switch your tv on using the POWER button.


Sony TV codes

010,011,028,030,031,077,107,128,131,166,203,237,302,309,367,444,445,446,449,160

To enter. Just hold SET and TV at the Same time.
The red led light stays on you are in set up mode.
Enter the first code on the list and try power button.
Keep following the steps untill you can turn the tv off.
Then its set.

Feb 08, 2010 | Televison & Video

1 Answer

I have a universal philips remote control without codes i need the codes


Some times universal remote controls have an option to find codes automatically.
if not try these 3 digit codes one at a time.
002 008 115 215 405 407 601 701 713 903 916

1. Press and hold the Code Search button until the red
indicator stays on. Release the Code Search button.
2. Press and release the desired mode button (TV,
DVD, etc.).
The red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables. Note:
after a valid code entry, the red indicator turns off.
For an invalid code, the red indicator flashes.

Dec 14, 2009 | Zenith C27A24T 27" TV

1 Answer

I need the automatic code search for a One for All URC-4063B07


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating

May 26, 2009 | Televison & Video

1 Answer

I cant find code for my remote control


if the remote universal
click in the same time on set and power
and it was light a red color lamp
and the remote control was search automatic if it search automatic you in the same time you click in on/off for look what the best code

Jan 09, 2009 | Panasonic Viera TX-32LX70 32 in. LCD TV

1 Answer

New universal remote. Can't find code for Cyberhome DVD player


My wife and I looked further in the instruction manual and there was a way for the universal remote to automatically search for the code without having to do it manually. I still don't know the code for it because the remote searched for it automatically but I do know that codes (0816, 1019, 1023, 1024) did not work. I wish I could help you with the codes but I can tell you that the remote can automatically find it. It's a great feature.

Jun 22, 2008 | Cyberhome CH-DVD 300 DVD Player

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

75276 Answers

Cindy Wells

Level 3 Expert

5379 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...