Question about Sharp EL-2192Rll Calculator
We are trying to change the ink rollers with no luck. We got them in but they are not printing.
SOURCE: ink rollers
Unless the ink roller that you installed was dried out, usually, the replacement rollers just snap in place and are good to go. Check to make sure there is ink on the roller by either pulling the ink roller out again, and touching it with your finger. If no ink on your finger, you might have received a dried out replacement roller. Also the roller should be somewhat like a sponge. If you push against the sponge and it doesnt spring back and it stays indented, then the roller might also be bad. If you happen to have a bottle of ink for an ink pad, you can try soaking the roller with the ink so the roller is wet, (but not DRIPPING WET) and try it again in the calculator. IF you get some image for a little while, then I would say try a new fresh ink roller.
Hope this helps.
Posted on Feb 04, 2008
You have a IR 40T replacement cartridge instead of a 40T
These are sold under the NR42-2 number as replacements for the Sharp 1801P but they do not fit. IF you look closely at the Sharp Models it lists on the package, it will say Sharp EL-1801V. I have not found a working replacement yet.
Posted on Jan 08, 2010
Tips for a great answer:
Nov 18, 2013 | Texas Instruments Calculators
Jun 08, 2012 | Sharp EL-1611P Calculator
Jan 13, 2011 | Sharp EL-2192Rll Calculator
Dec 02, 2009 | Sharp EL-1801P Calculator
Sep 12, 2009 | Texas Instruments TI-5019 Calculator
Apr 05, 2009 | Casio Calculators
Nov 20, 2008 | Canon P170-DH Calculator
Feb 04, 2008 | Sharp EL-2192Rll Calculator
Jan 08, 2008 | Casio HR-100TEPlus Calculator
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: