Question about Rival CZF630 Deep Fryer

1 Answer

Deep fat fryer

Our deep fat fyer will not turn on... we have two of them alike and they both have the same problem...

Posted by on

  • 3 more comments 
  • Anonymous Mar 27, 2008

    deep fryer won't get hot

  • Anonymous Mar 27, 2008

    Rival deep fryer won't heat up at all after cleaning. The oil pot is seated correctly and the plug is installed correctly but oil never gets worm

  • NymphNimue Jun 16, 2008

    We have a 1 year old deep fat fryer, model CZF630. Tonight, my husband changed the oil, cleaned the machine (he's done it before) and suddenly, it doesn't work. It had functioned for aobout ten minutes, and then stopped and could not be persuaded to start again.



    We checked our fuses and circuit breakers, with no change. We cleaned the area around the cord and then reconnected it. We relocated the machine and attempted to start it again.



    Nothing worked.



  • shoptx Dec 23, 2008

    after cleaning, fryer turned on for a few minutes, but stopped working and now won't power up at all.

  • Anonymous Mar 12, 2014

    120v-60Hz 1650w type 168946

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You can contact Rival HERE.

Mailing Address:
Rival
c/o JCS/THG, LLC
13120 Jurupa Avenue
Fontana, CA 92337

Telephone: 1-800-323-9519

If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

Posted on May 17, 2008

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hello,





    This thread has gone 7 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How long it fyer process


no idea since we do not know make,model etc till it get to the proper temp.

Aug 21, 2015 | Kitchen Appliances - Others

1 Answer

How do i replace the gas valve on pitco fyer model 35c+s


Either go to Pitco's website and look for cutsheets/parts info or call the company directly... They can walk you through it at no charge... Susan Restaurant Equipment Outlet, Cinc, OH
reocincinnati@yahoo.com

Aug 25, 2011 | Pitco Frialator 35CS Deep Fryer

2 Answers

Fyer will not shut off after reaching temp reset button comes on


Hi there.
Your thermostat may be bad, it does not cut-off on temperature setting that's why temperature continues to rise tripping the hi limit switch.Try replacing the thermostat.
Visit http://www.pitco.com for parts inquiries and owner's manual download.
Regards.

Jun 06, 2011 | Pitco Frialator SG18S Deep Fryer

1 Answer

Hi I have got a cecilware deep fat fryer


Sounds like you need a gas regulator in the main line.

Either that or you are using a natural gas fryer on propane which is a no-no if not converted properly.

Dec 20, 2010 | Cecilware FMS-40 Deep Fryer

2 Answers

Hobart deep fryer, light pilot heats to temp then all goes out?


You will need someone who is qualified in commercial gas appliance repair to fix this.
Liabilities would render this out of reach for anyone else.

Mar 29, 2009 | Hobart 1H50D Deep Fryer

2 Answers

Just bought new wells deep fyer # F-67


i had an electrician look at it. he told me the unit is wire for 3 phase, my plug is a single phase. he rewire the unit and it working good. problem solve.

Jan 26, 2009 | Wells F-67 21167 Deep Fryer

1 Answer

Just bought wells fyer model # F-67


3 phase is VERY DANGEROUS, contact an electrician,

Jan 26, 2009 | Wells F-67 21167 Deep Fryer

1 Answer

Lost my cordto my deep fyer it is a Rival CF154


The cords appear to run $8-15 before shipping, and it is possible to do some limited mixing and matching between brands. If that concerns you, contact your brand's own customer service for replacement parts information.

Here is the one included with the T-fal Cool Touch Deep Fryer (available from Target). Its design is probably the most 'universal' or most 'compatible' of the various minor variations I've seen, as it doesn't have the 45 degree angle or the key-lip I saw on some other cords:
T-fal SS-990957 Cord for FF1018002/FF1019
http://www.theconsumerlink.com/product_detail.asp?BID=TFal&T1=TCL+SS-990957&navStart=103&.
http://www.theconsumerlink.com/TFal/detail/TCL+SS-990957/102

More deep fryer cords:
http://www.theconsumerlink.com/TFal/list/tfaldeepfry/102/4

Amazon search:
http://www.amazon.com/s/ref=nb_ss_k?url=search-alias%3Dgarden&field-keywords=Deep+Fryer+Cord&x=0&y=0

Presto 09982 Magnetic Deep Fryer Cord
http://www.amazon.com/dp/B000EPKB3W

Lastly, Japan Tiger Corporation makes small countertop electric water heaters with very similar magnetic connectors. They can be contacted at:
Japan Tiger Corporation of USA
2730 Monterey Street, Suite 105
Torrance, CA 90503
Telephone: 310-787-1985
Fax : 310-787-1986
Toll-free :1-866-55-TIGER (84437)
E-mail : support@japantigercorp.com

Dec 14, 2008 | Rival RCF25 Deep Fryer

1 Answer

The fryer was working normal. Then the temperature light went out and the fyer is not coming on whe I flip the off an on switch


The first thing you need to check for is a high temperature limit cutout switch. It will be located near the gas valve but on the right side it wil have a cover that will snap open. it is about the size of 4" X 1 1/2". Once you get it open puch the button in you shoul dhere a click. When you hear the click you are reset. Once you turn the fryer back on use a temp probe or a type K thermocouple w/ a meter to check temp. if it starts over riding temp shut the unit off and replace the t-stat and the t/l cutout switch.

Thanks

Jul 20, 2008 | Garland AF-5025 Deep Fryer

1 Answer

Asseble the Rival Deep Fryer CZF625


You can contact Rival HERE.

Mailing Address:
Rival
c/o JCS/THG, LLC
13120 Jurupa Avenue
Fontana, CA 92337

Telephone: 1-800-323-9519

If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

Oct 26, 2007 | Rival CZF625 Deep Fryer

Not finding what you are looking for?
Rival CZF630 Deep Fryer Logo

Related Topics:

593 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rival Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

684 Answers

Ric Shull
Ric Shull

Level 1 Expert

2 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Rival Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...