Question about Mitsubishi WS-65869 65" Rear Projection Television

2 Answers

Mitsubishi ws 65869 green led turns on for 2 sec then turns off

Hi,

I am trying to determine what to do with my Mitsubishi ws 65869 TV that went out today while my daughter was watching it. Now when you turn it on the green led turns on (you hear a relay click) then it light goes out after 2-3 seconds. Reading about this TV on another post I ran the diaginostic and it returned at 2-2 error code. (short protect). Is this something I can fix (engineer) or should I call in a specialist? Could you suggest what it would take to get it fixed? < 500.00?

If someone has a service manual for this TV i would greatly appreciate it.

Thanks

Posted by on

  • lighten_up Jan 15, 2008

    yes you can send it to tvhelp@trashmail.net. Thank you!

  • lighten_up Feb 02, 2008

    My problem turned out to be a convergence IC board and it cost me $590. Funny thing is when they brought it back it didnt work.. The DM board failed over the weekend when it was stored in the warehouse. They did the popular "Cap" Job for $50.00 after I complained a little. Works Great now. I figured a 65" TV fix for < $800 seems practical to me since the replacement would cost over $4000-$5000 with tax and stand.

×

Ad

2 Answers

I have the same problem on my Mitsubishi WS-65869 same model and I call the certified technician for service.they said my DC convertion circuit board has been blow out.parts &labour to replace $375 lus tax.if anyone can fix with reasonable prize please let me know .
My Email ID zmalexander@yahoo.com
Zac Alexander

Posted on Feb 01, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

Your problem is not shown on schematic, C9A60 (470 pf @ 1000 v) capacitor and check and see if F9A04 & 05 are open. If so then its off to a whole different area. Do you have an email to send Sch.?

Posted on Jan 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi 65" WS-65869 Blinking Green Light 3-2 pattern,


two ideas:

Make sure you tested the pico fuses inside the unit with the caps==two or three of them.


Also from front of set behind speaker grill unplug both plugs that go up to front keyboard--set will still work with remote===if set functions now then the reset micro switch is bad/damaged.

Mar 12, 2012 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

Blinking green light on my mitsubishi tv....model ws-65869


Replace the Capacitors on the DM board. You can get the WS55859 DM repair kit which covers your model from www.tvrepairworld.com which has the caps and the CD with repair instructions

Jul 14, 2010 | Mitsubishi WS-65869 65" Rear Projection...

2 Answers

Picture is completely out of alignment, went to do


It means the convergence IC gave up already ang needs a replacement. And also check the 5A picofuse in the power supply.

Dec 28, 2009 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

Mitsubishi wd-62825 dlp


If the green front panel LED blinks continuously and the TV never comes on, its an issue with the "DM" board. When these TVs are first plugged in, the green LED should blink for 30 sec. to a minute or so. This is the TV booting up, reading its software. Mitsubishi has been having problems with this circuit for several years. In may cases the only permanent solution is to have the chassis rebuilt by Mitsubishi at considerable cost and inconvience. The chassis may have to be sent back to Mits for this rebuild. Call Mits and ask for help.

michtech

Feb 13, 2009 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

MITSUBISHI 65" RAER PROJECTION TV MODEL-WS 65511


Try to press both the menu button and the input/device button on the set both in together and hold in for 6 seconds to see if the led will blink a two digit blink code, then let me know the two didgit code, and I will try to assist you. Please respond to this same post when replying.

Aug 08, 2008 | Mitsubishi WS-65869 65" Rear Projection...

2 Answers

Mitsubishi WS-65869


This set will require that the power supply voltage problem be fixed...accordianman

Jan 20, 2008 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

Mitsubishi 65 inch Diamond rear projection


Sounds like your control unit has going down. its the big silver box in the rear to the left of the set.

Oct 28, 2007 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

Mitsubishi WS-65869 65 in. Power Light


They are little green soldered in fuses located on the center board (the one with the STK's on it) toward the rear of the set near the large transformer.

Aug 24, 2007 | Mitsubishi WS-65869 65" Rear Projection...

Not finding what you are looking for?

Open Questions:

See all Mitsubishi WS-65869 65" Rear Projection Television Questions

Mitsubishi WS-65869 65" Rear Projection Television Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1230 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...