Question about GE RM24912 Universal Remote Control
I am trying to set up a Sharper Image universal remote control and I have a RCA dvd/vcr combo unit. It does not give me any codes in the remote manual to set up for the equipment I have. Do you happen to know where I can find one? Also on the remote, do you know how I would notify the TV that I need to play something off of the dvd/vcr unit? Will that come when I get the code set up for the unit? Thanks Jeri
Here is the link for all Codes
and the Manual for instructions
Posted on Jan 18, 2008
SOURCE: sharper image universal remote
1) Turn on TV;
2) Press TV on the remote control;
3) Press and hold SETUP, until the red LED indicator blinks twice;
4) Enter 9-9-1-1 on the numeric keypad;
5) Press POWER on the remote;
6) If the TV doesn't respond, repeat #3, #4, #5.
Posted on Feb 17, 2008
i just pirchased a Sharper Image Jumbo universal Remote but i can't find a code for the Pioneer DVR 541H is DVD recorder. Does anyone have this code or a suggestion?
Posted on Oct 26, 2008
Hello kls1996... programming your remote is rather easy. The easiest way (thanks to The Sharper Image Jumbo Remote being a LEARNING SMART remote) is to do the following:
1 - Point the head of your Sharper Image remote at the head of your Sanyo TV remote (nose to nose so the clear bulbs on each remote are facing each other).
2 - Press the "TV" button on your Sharper Image remote (located in the upper left-hand corner).
3 - Hold the "LEARN" button on your Sharper Image remote (located in the left edge under the volume buttons) until the red light flashes.
4 - Press the key on your Sharper Image remote (e.g. Volume Up or +VOL)... the red light will go solid (indicating that it is waiting for a signal from the other (in your case Sanyo) remote.
5 - Press the key on your other remote (in your case the Sanyo remote) that you want programmed in your new Sharper Image remote... the red light will flash rapidly again.
6 - Repeat step #4 until you have programmed each key.
7 - When done... press the "LEARN" key on your Sharper Image remote. Your Sharper Image remote should be programmed to operate your device (in this case, your Sanyo TV).
NOTE: You can program other devices such as your VCR, DVD, VHS, SAT, CABLE, etc. and not just one device.
Posted on Jan 16, 2009
Tips for a great answer:
Apr 04, 2010 | One For All URC-9910 LCD Remote Control
on Apr 30, 2010 | Remote Controls
Jun 21, 2009 | Jensen JER-422 Universal Remote Control
May 30, 2009 | Remote Controls
Apr 17, 2009 | One For All URC-4021 Remote Control
Mar 13, 2009 | Universal Remote Control Remote Control
Dec 27, 2008 | Remote Controls
91 people viewed this question
Usually answered in minutes!