Question about Video Cameras
hai, If you are service engineer you can do this problem, Please, check the cassette IN sensing Switch. The place of the Switch is right side of the mechanism, Clean S/w with IPA solution & check. It will be ok or other wise you have replace s/w or mechanism.
Posted on Nov 10, 2006
SOURCE: palmcorder pv-L452D
Typical CCD sensor problem ...replace CCD block. This is normally due to a faulty component being installed so even if your camera is out of warranty try to have it done free of charge.
Posted on Sep 07, 2007
It's probably not worth fixing. Camcorders are so cheap these days and it's high time you upgraded to a good miniDV camera or even a hard drive model.
You could try resetting the camera. See if there's a firmware update for it that may address the issue. Go into the menu to see if you accidentally muted it.
But if a repair is in order, rule of thumb is that if you get an estimate that is north of 50% what you paid for it, you're better off taking that money and buying a newer, more updated model.
Digital Camera HQ
Posted on Dec 01, 2007
What u need at the minimum is an addon card for downloading(refer to the manual for the exact No. it is something like IEEE1395 or so) Then connect the cam to this thro' the cable.
If u use windows xp u have a movie maker. u can use that s/w. Else try to get pinnacle studio or studio 8 to dump and edit etc.
all the best.
Posted on Dec 28, 2007
Tips for a great answer:
Feb 28, 2011 | Panasonic Palmcorder PV-DV701 Mini DV...
Sep 25, 2009 | Panasonic Palmcorder PV-GS15 Mini DV...
May 17, 2009 | Panasonic Palmcorder PV-L353 Camcorder
Oct 27, 2007 | Panasonic Palmcorder PV-L353 Camcorder
Nov 08, 2006 | Panasonic Palmcorder PV-DV203 Mini DV...
115 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: