Question about Veo Observer XT Network Camera

1 Answer

No CD with my Veo Observer XT

I bought the "Veo Observer XT" IP camera, but there is no CD in the box (and no manual!). I better understand now why it was only 20 euros :-) In the box, there is a crossed RJ45 and a standard one. I tryed both on my Linksys rooter. In all cases, I get a flashing "255" IP adress on the camera display... and I don't see it from my computer.
What is the "Motion sensor jack" on the back ?
I cannot find on internet a place to download the CD :-(

Thanks for any advice... or web adress :-)


Posted by on

1 Answer

Re: No CD with my Veo Observer XT

The manual is available in .pdf format on internet. I bought one of these on ebay and have been using it successfully for years now.

Posted on Feb 08, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Whats the hostname or ip number

Read this, please:

Jan 24, 2013 | Veo Observer Network Camera

3 Answers

VEO observer hard wired version


Did you configure the webcam to be accessible over the internet? The IP address that you are using in your home network for the cam is only valid there (I assume you are running on a workgroup).

Jan 25, 2008 | Veo Wireless Observer Network Camera

1 Answer

I need veo observer REPLACEMENT power supply dc+5v. I have a bunch of power supplies and I want to know how it would be labled

when replacing the power supply of your veo observer, be sure to check the required amperes and voltage are the same as in the damaged power supply that you want to replace.

Mar 22, 2010 | Veo Observer XT Network Camera

1 Answer

Not showing the network ip address. Note i changed it from 192... to 172... and now trying to go back to the 192.168... network

Set the camera to "automatically obtain an IP-address".
Connect the camera, via an Ethernet network cable, to a router.
The router will supply a valid IP-address to the camera; much simpler than trying to "manually" set an IP-address, network-mask, and gateway IP-address.

Dec 08, 2009 | Veo Observer Network Camera

1 Answer

Since the VEO motion detector is no longer available, will another motion detector product work?

The motion detector is available new on Ebay right now from an electronics surplus dealer. Just type in 12v motion as your search and at least half a dozen come up. I bought one and it was new in the box with the instructions.

Sep 16, 2009 | Veo Wireless Observer XT Network Camera

2 Answers

VeoNetwork Web cam

You can view your Veo Observer web cam at home by either of two methods. The first is to use the Observer Studio software that came with the camera. When you configured the camera, you selected a local (private) IP address for each Veo Observer, and set the address specific to each camera. You then put the same IP address into your Observer Studio Software.

Depending on the brand of router you use on your home network, your Veo Observer camera probably has a local (private) IP address in the format or where "xxx" is the actual address assigned to your Veo Observer (by you) and configured to display on the LCD window on the side of the Veo Observer.

You may need to log into your router to see which of the two local (private) IP address formats is used. Your router's user manual will show you how.

To view your Veo Observer, just type the exact local (private) IP address in your IE browser. for example, if you assigned address 100 to your cam, you would enter or into your browser. Veo Observer will display the Language selection screen. Choose the language, then you log in and view your camera.

To view your camera from outside your home using another computer, you use the same method, but you have to substitute your WAN (public) IP address.

You can log into your router and select its STATUS tab to view your WAN (public) IP address. See you router's set up guide if you do not know how to do this.

An easier way to determine your WAN (public) IP address is to visit Gibson Research Shields Up! web page:

and scroll down to the last paragraph where you will find your WAN (public) IP address.

For example, if this address is 123.456.789.100, then you would enter http://123.456.789.100 on your IE browser. You should see the Language select screen, choose your language, then log in and you are now viewing your Veo Observer from outside your home.

Note: when you view your Veo Observer at home, you probably have a fast frame rate and smooth video motion. When you view your Veo Observer from outside the home, the frame rate is certain to be less, and your moving image quality will be choppy. This is normal, as viewing from outside the home is less efficient and the image suffers. There is nothing you can do to boost the frame rate.

Jun 15, 2008 | Veo Observer Network Camera

1 Answer

Veo observer

Connect your pc to your webcam directly with a cable,and close the firewall software on your pc,then try the set up utility.

May 20, 2008 | Veo Observer Network Camera

1 Answer

Veo network observer

since IT is a IP webcam,you should know what the IP address at your work and make sure that you can access that IP when you are at home.

May 15, 2008 | Veo Observer Network Camera

1 Answer

Voe observer down


Can you help me? I have an Observer camera too. And I have the problem "no response from camera" (Veo Observer Studio) and I can't reach the camera via Explorer too (the page dosen't exist).
Earlier it is working well except the remote access. I try it resolve and came the problem: "no response from camera".

What was the solution at your camera?


May 29, 2007 | Veo Observer Network Camera

Not finding what you are looking for?
Veo Observer XT Network Camera Logo

Related Topics:

783 people viewed this question

Ask a Question

Usually answered in minutes!

Top Veo Webcams Experts

micky dee

Level 3 Expert

2602 Answers


Level 3 Expert

1061 Answers

Waheed Hudewale

Level 2 Expert

209 Answers

Are you a Veo Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides