Question about Hitachi 27UX01B 27" TV

Open Question

Older Hitachi TV not sure of model #

Hi, I have a 13 year old Hitachi 26" tv. Recently when I put the sleep timer on and the tv turns off the screen stays glowing. I know that it can normally glow for up to a minute and then fade to black, but this is not fading to black. The only way I have seemed to be able to turn it completely off is by turning it off and on on the tv button itself. And even on some of those tries the corners or the centre will stay glowing.

I am wondering what this problem may be? Could it be a safety concern, such as a fire hazard?

Thank you.

Posted by on

3 Suggested Answers

  • 1 Answer

SOURCE: Hitachi 43FDX10B rear projection tv

Do you have a cable box which turns on and off with the tv? If so is your cable box input on the video 4 mode? If that is the case look under the video menu for advanced selections, you will see a selection for auto/on/off for video 4, select off. Check manul under video and it will explain also.

Posted on Dec 10, 2007

  • 1153 Answers

SOURCE: Picture reduced to a horizontal line across center

sounds like the vertical, more info

Posted on Dec 21, 2007

  • 4090 Answers

SOURCE: I have a Hitachi TV and it has recently started

Yes the overload sensor is cutting in You have some componenent/s getting hot. You need to do a warranty repair callout before more components burn out completely.

Please rate the help to keep the FREE service online ++++ Thanks for using FIXYA

Posted on Sep 03, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Tv turns off after about 10 min.

Either a power supply issue (a voltage too high or too low) or maybe a bad solder connection on the main board..

In either case may not be worth a shop repair.....?

Oct 30, 2012 | Disney 13" TV

4 Answers

JVC N Series TV "stuck' in sleep/timer mode, won't wake up

switch off the pulg from the wall socket and leave it off for half hour then try it again..
if not try to operate it with its tv panel buttons


dont rate it until u satisfied with the solution

Sep 26, 2008 | Standard (CRT) Televisions

1 Answer

Jvc model av36f702 it jumps of evry time im trying to put it on with the remote . i tink the timer is set to 0 secones .can i reset the tv.

press display button & it shows the following
NOW 12:20 PM
• The current channel or AV input (Channel 07)
• The current time (12:20 pm)
• Sleep Timer status/minutes remaining (The Sleep Timer is off)
• On/Off Timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)
• Each Press of the DISPLAY button changes the display mode:
Press the SLEEP TIMER button & set it to OFF

Dec 22, 2010 | JVC AV-36F702 36" TV

1 Answer

My tv is stuck in a closed caption screen

CLOSED CAPTION SELECTION SLEEP 10 To cancel the sleep timer: Press the SLEEP button repeated-ly until "SLEEP 0" is displayed. You may view specially labeled (cc) TV pro-grams, movies, news, prerecorded tapes, etc.with either a dialogue caption or text displayadded to the program.1) Press the MENU button so that the menudisplay appears on the TV screen.2) Press the CH(annel) ▲ or ▼ button to pointto "CAPTION".3) Press the VOL(ume) ▲ or ▼ button to selectthe mode you wish.4) When done, press the MENU button to exit the menu
Then turn OFF.
I also include your user manual below. It's easier to read in there.

Aug 21, 2010 | Symphonic ST413C 13" TV

2 Answers

TV will not come on with remote or power button

The following instructions are for the Emerson EWC1303/1903 tv/vcr. That's the closest match I could find to the Spongebob Squarepants 13' TV
If it's actually in Sleep mode, do the following:

Press the WAKE UP/SLEEP button on the remote
control until “SLEEP TIMER” appears.
To view the time left for sleep timer press the WAKE
UP/SLEEP button twice, then press the MENU button
on the remote control to exit the sleep timer setting

If unsuccessful, try unplugging the TV for 1/2 hour, then plug it in and try turning it back on either manually or with the remote. Either of these should solve your problem. Best of luck to you!

May 08, 2009 | Emerson SpongeBob SquarePants TV

1 Answer

Picture is there briefly then goes black with sleep timer blinking

your tv had a cold solder,so try to resolder the vertical ic. or vertical section as well.

Sep 05, 2008 | Sony KV-35S42 35" TV

2 Answers

JVC tv "stuck" on sleep timer

I think you would have to turn off the sleep timer mode completely or increase its ON time span, say to 4 hours or so
or the lenth of time you have the TV on for. If that does not fix it then it sounds like a STANDBY MODE fault problem.
Hope this helps.

Feb 06, 2008 | JVC AV-27320 27" TV

1 Answer

TV problem

Hello Barbara76,
Is this a Horizontal line (inch or two) across the screen, if so
the fault could be either a faulty Vertical IC,Faulty Electrolytic
capacitors or just simple dry joints.


Feb 03, 2008 | Mitsubishi CS-27205 TV

Not finding what you are looking for?
Hitachi 27UX01B 27" TV Logo

Related Topics:

570 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66499 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Hitachi Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides