Question about Bissell 6594 PowerForce Bagless Upright Vacuum

1 Answer

Not one, but two Bissell-Power Force Vacumns are defective. After assembling the first, it would not run. Bought another only to find out, it will not work either.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers
Re: Not one, but two Bissell-Power Force Vacumns are...

If these vacuums are less then 1 year old, they are under warranty, call the Bissell number and they can tell you where the nearest repair shop is. That along proof of purchase.

Posted on Jan 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My Bissell Proheat Clearview Force isn't producing steam. The water isn't coming out of the tank

Either an electrical connection to the heater element is broken, or the element itself has become malfunctional. You'd have to dis-assemble the machine to inspect what exactly is the problem, then replace any non-functioning parts.

Oct 14, 2013 | Bissell 1699 ProHeat Clear View Upright...

1 Answer

Bissell Proheat Clearview Force won't produce steam

Either the electrical connection to the water-heating element are corroded or broken. Worse, the element itself my be dead/non-functioning. You would have to dis-assemble the machine to find out what can be repaired or replaced.

Oct 14, 2013 | Bissell Vacuums

1 Answer

Is the beater brush on the Bissell Helix NOT to spin on bare floor setting?

Hey Tony! The brush does continue to rotate when using the vacuum on the bare floor setting.

Feb 02, 2013 | Bissell Cleanview Helix Deluxe Bagless...

1 Answer

I need a diagram of how the roller assembly goes back ont the bissell proheat 2x unit

can i have the instructions for the PRO HEAT CLEAR VIEW FORCE shampooer mailed to my home?

Jul 30, 2011 | Bissell Vacuums

1 Answer

My bissell power force bagless model 6594-w vaccuum is not sucking up when vaccuuming but if i use the hose it works

Remove the bottom plate that covers the brush assembly and check the air passage that goes out where the vacuum is jointed between the vertical parts and the sweeper head. Look for any clog in that area. A bent hook on the end of a piece of coat hanger wire is a good tool for cleaning clogs. Hope this helps!

Dec 10, 2010 | Bissell 6594 PowerForce Bagless Upright...

1 Answer

How to assemble Model 7901-T. My wife has bought a Bissell Proheat Plus Model 7901-T. She has lost the manual for me to put it together. Is there an online manual for the assembly of this machine?

BISSELL User's Guides can be downloaded at
On the front page under Customer Service click on User's Guides and enter the model number of your unit.
User Guide will be displayed as a PDF file.

Sep 28, 2010 | Bissell 7901-1 ProHeat Scotchgard Upright...

1 Answer

I just bought a bissell power roller prodry cleaner and turned it on and nothing happens. Is there another button I am not turning on to get it to work?

The power switch is on the back of the handle. If that dosen't turn the unit on take the handle off and put it back on make sure its tight. If still nothing then its defective. Bissell says not to return it to the store contact a service center. If you have never used it return it.

Dec 16, 2009 | Bissell 7920 ProHeat Pro-Tech Upright...

3 Answers

Brush will not turn

The most common problem is the handle isn't screwed in tight enough when the machine was assembled. Try tightening it down all the was and the electrical connections will then seat properly.

Jul 05, 2009 | Bissell Healthy Home HEPA Bagless Upright...

1 Answer

Bissell power force

turn vac over, take of the access plate covering the brush roll, may be 2 to 4 screw. Then you can get to the brush roll and belt. It uses a Bissell Style 7 belt.

Jan 09, 2008 | Bissell 3522 PowerForce Bagged Upright...

Not finding what you are looking for?
Bissell 6594 PowerForce Bagless Upright Vacuum Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts


Level 3 Expert

18258 Answers

Roger Potts

Level 3 Expert

694 Answers

Brad Brown

Level 3 Expert

13362 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides