Question about Maytag EPIC MFW9700S Front Load Washer

1 Answer

Code error f07 indesit washihg machine

Please can you tell the solution to code error f 07 on my indesit washing machine?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer
Re: code error f07 indesit washihg machine

Per Maytag, they suggest you unplug the washer for 20 minutes and see if that resets the circuit board.

Posted on Feb 27, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Error code f 07 mid cycle?!?

You do not state your machine or model. The error code F07 that I have states that the Central Control Unit has detected a short in the Motor Control Unit.
Check the wire harness between the Drive Motor and the MCU and between the MCU and the CCU.
Check the MCU.
Check the Drive Motor.
Check the entire wire harness.

Replace any defective parts.

Apr 26, 2011 | Washing Machines

1 Answer

My hotpoint aquarius washing machine is flashing f-07

Hi from retired Englishman in SW France,
For most Hotpoint (Indesit) models 'F07' means 'heater relay (possibly) stuck'. 'Check power supply connections to the heater, wiring and module (i.e. PCB) connections' (apparently poor PCB connections are often the cause).
So- if you are not electrically confident and competent yourself, which you may be, you need to employ the skills of a partner, friend or service engineer ;-0)
Sorry we cannot be of more help!
Good luck, John C

Mar 30, 2011 | Hotpoint Washing Machines

1 Answer

F70 mhwe900vj00

What is f70? is that an error code? there is no f70. there is an f07 code.
there it will tell you what f07 means and what to check

but if i am way off tell me what exactly you want to know thanks

Mar 31, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F-07 is flashing on my washing machine

If you have a Hotpoint, Creda or Indesit Machine the the F07 code means you have a heater fault and should check the heater, module and associated wiring. For more error code solutions click on the link

Mar 16, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Error codes f1 + f7 on washer

Error code F01 indicates a short circuit motor triac.
Chek all connections on and to the motor, motor plug and control module.
Code F07 indicates heater relay stuck.
Check all connections to and from the heater and control module.
Hope this helps you.

Jan 05, 2010 | Washing Machines

1 Answer

Hotpoint WD860 - Fault Code F-07

F07 indicates heater relay stuck.
You need to check the heater to see if it is faulty, and fit new one if it is.
Please rate my solution.

Jul 10, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer


Solved by heater replacement, cca 7eur in Belgrade.

Mar 19, 2009 | Washing Machines

1 Answer

Fault codes

Fault F07 indicates the heater relay is stuck, this could be due to a faulty heater, you need to test it to be sure, if heater o/k, then main pcb could be faulty.
Please rate my suggested solution.

Feb 19, 2009 | Washing Machines

1 Answer

Hotpoint WD860 problem

washer wf860 showing f07 error. why

Mar 04, 2008 | Hotpoint Washing Machines

3 Answers

Indesit WIE 147 - Display 'F-03' fault

Indesit washing machine error code 3 (F03) On certain Indesit washing machines, if the on off light is flashing 3 times, with a slight pause, followed by flashing a further 3 times, or if it is didplaying F03 you have an error code that is explained as follows -
NTC fault - check Thermistor and module connections.
The NTC is the thermistor, which is a modern-day thermostat. It’s inserted into a tube in the heating element and is filled with heat sensitive crystals that change their electrical resistance according to their temperature. By knowing what electrical resistance the crystals have at given temperatures they can tell the water temperature.
With this fault the NTC is either faulty, or there’s a dodgy connection to or from it or there’s a connection problem where it connects to the main PCB.
It’s not something you can easily fault find yourself unfortunately, apart from if there was an obvious broken wire.

Feb 10, 2008 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Maytag EPIC MFW9700S Front Load Washer Logo

1,307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides