Question about GE 25932 Twin Cordless Phone

1 Answer

Ge cordless phone station 2 shows unavailable

Station 2 shows unavailable when I try to use it

Posted by on

  • 1 more comment 
  • scubabride Jan 17, 2008

    I followed the directions and when I put it on base it flashes Ready alternating with a string of numbers, but when removed from the base I still get unavailable and no dial tone

  • DreamPhone May 03, 2008

    My new GE 25932, 5.8 GHz twin cordless phones were working for 2 months, I went away for one week, when back, both phones didn't work, both showed unavailable, both have power surge protection.
    I try to register each one at the home base for 20 seconds, still unavailable.
    I try another phone which works right away with the phone line.
    I try to unplug everything to discharge the battery for 7 days, nothing works.
    Any solution is appreciated.

  • ShawnPeever Jun 05, 2008

    I have the same proble. Both handsets are showing unavailable. I have attempted registering them in the home base for hours. The batteries have also both been replaced. I have also tried several different phone cords and phone jacks. Any solutions here besides throwing them into the garbage?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You have to register the hand set in the main base. Place each handset in the base for 15 seconds minimum. It will change form unavailable to Ready when it grabs the signal from the base. If the power goes out, you will have to re-register each hand set in the base before you use them again.

Posted on Jan 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Uniden Dect 6.0. My phone book and CID ar showing as unavailable. How do I fix the issue? Thanks, Keith


Had the same problem which is easily solved by unplugging the base station, waiting for 30 seconds or so, and plugging back in again. CID and phone book then magically reappear (though I don't know for how long)

Sep 05, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Cannot get bbc 1 2 3 have retuned several times. it is a television with built in freeview


Do you use off-air signals (the bunny ears) or a cable/satellite/fiber-optic box?

With off-air signals, it is most likely that
A. the station is broadcasting 1080i content to a 720p TV or
B. the station in experiencing technical difficulties, is currently unavailable in your area, or is being blocked by a large tree.

Otherwise, this is a problem with your receiver. Check your settings and ensure that the station is currently available in your area.

Nov 11, 2009 | Samsung LE26R74BDX 26 in. HD-Ready LCD...

1 Answer

I have a ge27851f-2 cordless dual phone and both handsets say unavailable even when paired at the base.


If the base station is plugged into the phone line you should be able to designate one phone as the master. That phone should be on the base station when charging. If you look in the manual it should show you how to redo the master. It's usually just pushing a button when on the station. Just takes a second. That will also enable the phone to work with the base station. It locks out any phones that haven't been physically connected to the bases. To do the second phone you may have to do a slightly differant process to register it with the bases.

Nov 04, 2009 | GE 27851FE2 Phone

2 Answers

Phone showing "unavailable" and there is no dial tone. I have tr


Unavailable and no dial tone usually means that there is a bad wire between the base and the wall or the wall jack is bad.

Jun 27, 2009 | Uniden Cordless Phone

1 Answer

Handset 2 show unavailable


hello
there is some battery problem with your phone please service it asap.

Jun 21, 2009 | GE 25841GE3 5.8 GHz Twin Cordless...

1 Answer

Sph200d not getting ip address from router


I had the same problem. I set up a static address instead and it works very well. I just copied the details form my laptop, diabled the laptop and set up the phone with the same details as I had on my laptop. Once I start the laptop again, it will get another address. --Jonas

Jul 23, 2008 | NetGear SPH200D IP Wireless Phone

1 Answer

Extra handsets no longer seem to work. No ring and no line


Please be sure to put the extra handsets in the MAIN base station to register. They will not register in the small remote charger stations.

Let me know if that fixes the problem!

Brian

Jun 15, 2008 | GE 25942GE2 Cordless Phone System

1 Answer

Network, Internet, or Base Station Management Tool Are Unavailable


To resolve this issue, turn off Internet Connection Sharing on your network connection: 1. Click Start, click Control Panel, and then double-click Network Connections. 2. Click your network connection, and then under Network Tasks, click Change settings of this connection. 3. On the Advanced tab, clear the Allow other network users to connect through this computer's Internet connection check box. 4. Click OK. 5. Restart your computer.

Feb 16, 2006 | Microsoft Broadband Networking MN-500...

1 Answer

Network, Internet, or Base Station Management Tool Are Unavailable


To resolve this issue, turn off Internet Connection Sharing on your network connection: 1. Click Start, click Control Panel, and then double-click Network Connections. 2. Click your network connection, and then under Network Tasks, click Change settings of this connection. 3. On the Advanced tab, clear the Allow other network users to connect through this computer's Internet connection check box. 4. Click OK. 5. Restart your computer.

Feb 16, 2006 | Microsoft Broadband Networking MN-100...

Not finding what you are looking for?
GE 25932 Twin Cordless Phone Logo

Related Topics:

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Cindy Wells

Level 3 Expert

5341 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...