Hello,
I have a Soltek SL-65KV2-CT - motherboard - ATX - Pro133T working with the Intel Pentium III SL3VG (600 MHz) and 128 MB 133Mhz SDRAM PC133 DIMM 168PIN RAM. it's working slow but it works !
I would like to know if i can simply substitut the 128 MB ram memory for 3 * 512 MB (1,5 GB) and the SL3VG for one of this processors:
Intel Pentium III 1.40GHz 133MHz FSB 512KB Processor (Intel P3 Tualatin model SL6BY)
or
Intel Pentium III 1.40GHz 133MHz FSB 512KB Processor (Intel P3 Tualatin model SL5XL)
Thanks
U have to find the motherbord's manual !!!! U will find there all u need. But most probably u won;t be able to put those processors (the speed diferences are too big, even if they are of the same slot type)
Was this helpful?
Yes
No
Solution #3
posted on Apr 08, 2008
Guest
Rank: Apprentice
Rating: 0%, 0 votes
Thank you
Popular Solutions for Soltek SL-65KV2-T Motherboard
powers on screen dead wont light up the dvd rom flashes off and on an makes ticking noise from the...
(More)
powers on screen dead wont light up the dvd rom flashes off and on an makes ticking noise from the dvd rom can hear hard drive spinning the hard drive light blinks in tune with the dvd rom light
hi have a dv8225nr laptop. did bios upgarde to fix keybroad problem after download restarted laptop...
(More)
hi have a dv8225nr laptop. did bios upgarde to fix keybroad problem after download restarted laptop and gets to hp logo and stops.can't get in to bios. can get to screen to set was goiging on with esc keep and stops aalso with f10 key gets to hp logo screen and stop on please wait thanks
kyocera 1505 error e07 Problem. only from cassete, while is set in display A4 paper, and put A4 in...
(More)
kyocera 1505 error e07 Problem. only from cassete, while is set in display A4 paper, and put A4 in cassete. From bypass works perfect. Goes out 1 copy and gives E07. copystar.gr
I have an Asus P5KC and after loading Windows 7 I had a boot failure and now all I get is window...
(More)
I have an Asus P5KC and after loading Windows 7 I had a boot failure and now all I get is window boot manager screen everytime I try and boot up. Tried putting in a new hard drive, re-setting CMOS and inserting my Wondows 7 disk and nothing work, NEED HELP!