Question about PC Desktops

1 Answer

My computer turns off totally without warning

Pls. help me with my problem. when i boot my compter it goes off with popping any error.what should i do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers
Re: my computer turns off totally without warning

U never mention in your problem what pc are u using, so i assume it as any other pc.and you never mentioned any halted errors occur...please state it the next time you ask for help please so we can direct you to some solutions that would probably lead you to short time trouble...first thing you have to do is to disconnect all drives, like the cdrom and the floppy drives if you have one...except the hard drive or the hard disk..then if this will work you have a power supply failure...something wrong inside you power is unable to supply the right load to make everything inside your computer it goes off...or trip off...then if you still have encountered thesame problem after trying the first step...try reprogramming your computer..install a new operating system...if it doesnt work..change the mother board....tnx

Posted on Jan 14, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The following are warnings that were detected during this boot.These can be viewed in setup on the event log page.Warning: chassis instruction

the following warning that were detected during this boot. these can be viewed in setup on the event log page. warning- chassis intrusion

Dec 18, 2012 | PC Desktops

1 Answer

I turn on my computer and i get a box that sais adjust screen and gives a resolution and then goes black, nothing else happens no beeps no booting noise. F10 pops up another screen for 2 seconds then goes...

try to boot in safe mode.To do that.
restart your computer continues press F8 key it will show the option select safe mode
and you can work with that and change the reasoluition and restart the computer work with normal mode..

Nov 13, 2010 | HP Pavilion A610n (PC106A#ABA) PC Desktop

1 Answer

My computer will turn on go thru all the motions like it is working it says windowsxp then goes to welcome screen then goes to my screen it wont show any programs or the start

It seems the Explorer.exe is not running properly or isn't loading. Press Ctrl+Alt+Delete (when it shows nothing on the screen) on the keyboard, the Task Manger will pop up, click "File" and select "New Task (Run)" and type in "explorer.exe" (without quotes), wait for few seconds, it should open up all the features properly, if this fails, go into Safe Mode and try again. To go into Safe Mode, restart the computer and keep tapping the F8 button on the keyboard until you see the Advanced Boot Options with Safe Mode as one of the options. Select Safe Mode using the arrow keys on the keyboard and press enter, you will see white texts in the black screen, wait until you see a warning to confirm whether you want to boot into Safe Mode or not, give a positive input and proceed forward, once windows is loaded, you better run a full system virus scan or I would also recommend System Restore.

If you need further help, let me know.

Good luck.

Thanks for using FixYa.

Nov 02, 2010 | Compaq PC Desktops

2 Answers

NTLDR is missing

problem:nt device loader error message
Solution: Reinstall windows

Aug 02, 2009 | Compaq Evo D500 PC Desktop

1 Answer

Computer wont boot up

first reconnect your keybord and mouse jack in computer then power up the compter then press del or F1 or F2 to nweter in bios setup then just press F10 and save settings .

Feb 07, 2009 | Dell PC Desktops

1 Answer

System passes the logon screen

Keep tapping the F8 key while you boot your machine, hopefully you will get a black screen with some white writting on it.
Using the up and down arrows select Boot Safe Mode without Networking.
Once you boot into safe mode go to programs>accessories>system tools>system restore and follow the wizard to restore your machine back to a time and date before you installed the modem software.

Aug 30, 2008 | E-Machines eMachines Desktop PC

2 Answers

Boot problem

thanks for your reply i have replaced the battery with a new one and the same problem still exists... why does it not boot from power button?

Feb 03, 2008 | E-Machines eMachines Desktop PC

1 Answer

"Improper Image in use" Error during system recovery

There are several ways you can get a repair man...
1).Find and Compare prices on repair man at
2).Find repair man at Great Prices at
3).Schedule a repair online at
5).look in a phone book

Dec 08, 2007 | Sony VAIO PCV-W20 PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18258 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides