Question about KitchenAid Pro Line Coffeemaker Coffee Maker
SOURCE: E2 error code
In reading the manual for this coffee pot, it needs to have the descaling procedure run. The manual lists running a mixture of 6 cups water and 6 cups vinegar in a normal brew cycle...twice to clean hard water deposits from the machine. It says to make sure to remove the filter basket. Once the procedure is complete, unplug the unit and replug in to remove the E2 code.
Posted on Sep 01, 2008
Tips for a great answer:
The icons displayed blink slowly to
show that the machine is warming
When warm-up is complete,
the machine performs a rinse
cycle of the internal circuits.
During this phase, the icons displayed
will blink in sequence.
• When the operations described above
are completed, the icons on the display
The display will appear as
shown to the side. The displayed
aroma is the factory setting
when the machine is switch on for
the fi rst time, or it is the same as the
aroma that was selected for the last
brewed coff ee.
The machine is then ready to brew
beverages if you have any further questions or the triangle does not go away please message me back for further diagnosis Thank you
Nov 05, 2011 | Gaggia Brera Coffee Maker
Sep 05, 2011 | Keurig B60 Coffee Maker
Jun 21, 2011 | Rancilio Silvia Espresso Machine
Sep 30, 2010 | KitchenAid Pro Line Coffeemaker Coffee...
Jan 10, 2010 | Saeco Talea Touch 14-Cup Coffee Maker
Nov 07, 2008 | KitchenAid JAVASTUDIO KCM534 14-Cup Coffee...
Jul 26, 2008 | KitchenAid Pro Line Coffeemaker Coffee...
48 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 2 Expert
Level 2 Expert
Step 2: Please assign your manual to a product: