Question about Sony FD Trinitron WEGA KV-34XBR800 34" TV

1 Answer

Correct overscan on kv-34xbr800

Hi, can someone post the combination to get in to the service menu for a kv-34xbr800. I've got some pretty bad overscan in mythtv and I need to squeeze the picture a bit.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

With TV off, enter the following on your remote:
Display > 5 > Volume + > Power now you are in service mode 2 & 5 will take you up and down categories 1 & 4 will take you up and down settings within categories 3 & 6 will change the data up or down
So press 2 until you come to the 2170D_2 category Press 1 until you get to HSIZ and change the data down to the required setting (different data registers for different width settings)
It could be more involved but this might do the trick in your case. Good luck!
Fixatorre

Posted on Mar 24, 2008

  • Fixatorre Mar 24, 2008

    PS:  To write your final setting, you enter muting > Enter.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I enter the service menu on an Emerson EWF2004 CRT Television? (Pictures of the OVERSCAN ISSUE will be provided if needed.)


Older sets had vertical and horizontal size controls. If you have the horizontal size control, turning it counterclockwise will reduce the size of the picture horizontally and reduce the overscan.

Feb 25, 2016 | Emerson EWF2004 20" TV

1 Answer

How to access service menu


If you wish to get some details, check the site linked here. http://electronicshelponline.blogspot.com/Pull up older posts. Service mode entry, and adjust procedure is too much to type in here, and is not practical The site linked above has details to this, for may popular models TVs. http://google.com/+GopakumarGopalan

Dec 28, 2013 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

1 Answer

Sony KV-34xbr800 standby light flahes all the


Hi,
Flashing standby light is an error code that is specific, there would be pause of 3 seconds in flashing, so count pause to pause and let me know that how many times red standby light is blinking to diagnose problem.
Thanks.

Jan 11, 2010 | Sony Televison & Video

1 Answer

Picture bowing in center from top down about 1 inch in middle, ok at edges, also looks as if degause is inoperative with colors on left and right (purity) --------------------------------__________________...


This is a convergence problem. Look for poor connections at the convergence ICs. Try resoldering the pins on the ICs. If that does not resolve the problem, replace the ICs.

Dan

Jul 27, 2009 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

2 Answers

Sony KV-34XBR800


Complete manual is here:
http://www.mediafire.com/?ixd49edyyam


ID
KV-34XBR800
34XBR800
0 ID0
89
1 ID1 255
2 ID2 239
3 ID3 107
4 ID4 203
5 ID5 243
6 ID6 126
7 ID7 25

Rate me as fixya for my work, and ask another question if needed.

Mar 27, 2008 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

1 Answer

34XBR800 No width setting


The Sony manual can be downloaded here for free
http://www.mediafire.com/?ixd49edyyam

ID codes from manual:
KV-34XBR800
KV34XBR800
0 ID0
89
1 ID1 255
2 ID2 239
3 ID3 107
4 ID4 203
5 ID5 243
6 ID6 126
7 ID7 25


Mar 22, 2008 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

3 Answers

RE: Flashing "Standby" light


LED blinking Seven times. High voltage shutdown. The high voltage has exceeded 33k and the unit goes immediately into safety shutdown. Check power supply regulation and horizontal circuits.

Jan 21, 2008 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

2 Answers

Fix my tv


We are going to have to know just a little bit more about it.
How old?
What Model number?
What kind of TV?

Jan 02, 2008 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

1 Answer

KV-34XBR800 Reset everything in service menu


In the service menu or customer menus? On a Sony I wouldn't use a standard degausing coil as you will do damage to the CRT. Sony requires the use of a low power wand degauser.

Nov 30, 2007 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-34XBR800 34" TV Logo

Related Topics:

648 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...