Question about GE WSM2700D Top Load Stacked Washer / Dryer

1 Answer

Series 80 kenmore washer..doesn`t spin..

Makes humming sound..but doesn`t spin..any suggestions..or how much would it cost to repair?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: series 80 kenmore washer..doesn`t spin..

Make sure belts are still atached. Belts are relatively inexpensive and eazy to replace yourself.

Posted on Jan 14, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Kenmore Washer 80 series won't spin,agitate,or drain and hums.

It sounds to me like the motor coupling is bad-the humming sound is the motor running not hooked up-sears has a good sight for looking up the part you need cheers-Denny

Oct 13, 2013 | Washing Machines

1 Answer

Kenmore 80 series washer cycle issue

motor coupler is most likely broken. remove cabinet, remove pump from motor, then remove motor from gearcase. the coupler can be purchased at local parts supplier or ordered on line.

Jan 30, 2012 | Kenmore Washing Machines

1 Answer

Kenmore TL Washer Just Hums

try to wash by 1/2 load the same cycle maybe the problem come from overload laundary

Jun 06, 2009 | Washing Machines

1 Answer

Washer wont spin in the spin cycle.Washer was full of water and making a buzzing noise.If you have any suggestions what it might be that would be great. Kenmore 80 series washer about 11 years old.

sounds like the lower bearing on the trans mission shaft is seizing up on you. had a frigedair that did the same thing. i took it apart to replace, but could not buy separate. it only came with a purchase of a new transmission,which ran $175- 275. so i junked it out. washer was only 5 years old.

May 29, 2009 | Kenmore Washing Machines

1 Answer

Washing machine won't drain or spin

sounds like a broke lid switch is is an inexpencive repair the switch run about 30.00 -40.00 dollars plus the labor to put it in shouldn't be much must that just the service call to to come out.

Jan 22, 2009 | Kenmore 24032\24036 Top Load Washer

4 Answers

Kenmore 80 series won't spin

If it agitates and drains. leaving your clothes clean but soaking wet. It is most likely the transmission/gearbox. the motor is working otherwise it would not agitate. it is stuck in agitate mode and cannot "shift" into spin mode. new transmission will cost 140-170 and takes 2 or so hours to replace depending on skill level. total repair cost parts+labor $300ish you may want to ante up for a new machine at this point. if you cant to the labor yourself.
part# should be this: tho double check using your own model#
Part # AP3096209

Jan 13, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
GE WSM2700D Top Load Stacked Washer / Dryer Logo

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides