Posted on Nov 25, 2009

We're seeing heavy pixelation on all of our prints.

We're seeing heavy pixelation on our prints from our oki C5650 laser printer (And the color fidelity if way off). Everything we're printing is between 300 to 1200 dpi from vector based artwork. Our monitors have been calibrated using Pantones huey pro.

1 Answer

TimmyQMS

Contributor 40 Answers
Posted on Nov 25, 2009

TimmyQMS

Contributor

Joined: Nov 24, 2009

Answers

Questions

Helped

14121

Points

I would try going to the color menu on the printer and performing the density and registration calibration that should cure your problem hope this helps.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

When printing color image, color is to heavy/dark

adjust the print density from the properties of printer

Read full answer

Apr 23, 2013 • OKI C5200n Laser Printer

0helpful

1answer

Color printing is too dark/heavy

adjust the print density from the printer properties

Read full answer

Apr 23, 2013 • OKI C5200n Laser Printer

0helpful

1answer

Oki printer duplex problem

Have you found the reason why?

Read full answer

Jun 22, 2012 • Oki Electric Industry Okidata Duplex Unit...

0helpful

1answer

Hi, we have an oki C5650 and use sublimation paper through the printer. We have had no troubles up until recently when we purchased a generic magenta cartridge. The red on pictures was bleeding off and...

I cannot understand why you are using sublimation paper on an LED printer which uses toner. I always thought that sublimation printing is used with dye and not toner. Why it worked in the first place is odd. Anyway I reckon you have worn out the fuser and or the fuser is not reaching temperature which is why its not fusing correctly.

Read full answer

Jun 13, 2017 • OKI C5650n LED Laser Printer

10helpful

1answer

How do I reset fatal error code 980 on a oki c5650

Oki is forcing you to buy a new fuser. If fuser roller, film and thremistors are still in perfect shape, reset is possible with new OEM FB fuse

Read full answer

Jun 18, 2011 • OKI C5650n LED Laser Printer

4helpful

1answer

OKI c5650 flashing "K drum life" I buy new charge

1. Turn machine on while pushing and holding the TWO up/down menu buttons at same time.
2. Menu window will show "OKI USER"
3. Scroll to " Engine Dialog Mode" is indicated. Push Enter button.
4. "Diagnostic Mode xx.xx.xx S-Mode is indicated.
5. Scroll to "NV-Ram initial" is indicated. Push ENTER.
6. Window shows "NV-Ram- Initial Table 1".
7. Push ONLINE and ENTER Buttons simultaneously and HOLD for 10 seconds after you see "Executing Reset" appear in menu window.
8. Restart printer.

All toner, drum, fuser and transfer figures return to 100%.

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Read full answer

Jun 08, 2011 • OKI C5650n LED Laser Printer

0helpful

1answer