Question about Panasonic Lumix DMC-FZ50K Digital Camera

1 Answer

Viewfinder focus I am unable to properly focus using the viewfinder and see a clear focused picture even with trying to use the opitcal zoom. However, I have no problem using the lcd and adjusting the optical zoom to get a clear picture. is there something wrong with the lense or have i inadvertently set a function on the camera.

Posted by on

  • Penrherber Mar 26, 2008

    dioptre wheel offers insufficient adjustment. is it broken?



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you tried focusing the diopter? The focus wheel is just left of the viewer. If you know all this then consider one more thing. There is a plus and minus setting for your eye so roll the wheel slowly to not miss the sweet spot for your vision. goodeye

Posted on Jan 18, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Focus is off

Check to make sure the focus screen is in properly

Aug 08, 2013 | Canon EOS Rebel XSi Digital Camera

1 Answer

Problem with viewfinder - focus?! I've been using my Nikon d3000 for over a year now. Few days ago I tried to take a photo but when looking through the viewfinder, the photo wasn't focused. It was...

There's a diopter control near the viewfinder to adjust the viewfinder to your eye. Try adjusting that while peering into the viewfinder and try to get the focus brackets and the data at the bottom of the viewfinder into focus.

Jun 20, 2011 | Nikon D3000 Digital Camera

3 Answers

My canon 18-55 lens will only take a picture in wide angle. as soon as i try to zoom at all it won't take a picture. it is 4 months old and hasn't been used much. and i haven't dropped it. any suggestions?

The Auto-Focus on the lens is damaged. I have had the exact same problem with my 18-55 and I ended up buying a new one because I take shots at weddings and I can't afford to manually focus each photo. You can still use it if you switch the small knob to MF and then use the focus ring for manual focus.

Jan 18, 2011 | Canon EF-S 18-55mm f/3.5-5.6 USN Lens

1 Answer

I look through viewfinder and view is out of focus

Yes, common problem, small plastic tab(s) connecting viewfinder to the zoom are broken.

Apr 17, 2009 | Olympus Stylus Zoom 140 35mm Point and...

1 Answer

Viewfinder of Sony DSC-H2 does not work anymore

Viewfinder has focus lever at bottom, please adjust viewfinder internal focus as per your eye sight looking on-screen display. Every thing will be fine after that.

Feb 04, 2009 | Sony Cyber-shot DSC-H2 Digital Camera

1 Answer

Rebel XT pictures are in focus but look blurry in viewfinder

Use the little wheel dial with the +/- sign on it right on the viewfinder...ajust it until things are clear

Nov 22, 2007 | Canon Rebel XT / EOS 350D Digital Camera

2 Answers

JVC camcorder with blurred images

It could be an issue with the dioptre adjustment: 1 Set the Power Switch to ?A? or ?M? while pressing down the Lock Button located on the switch. 2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability. So slide the rubber eyecup toward you. 3 Turn the Dioptre Adjustment Control until the indications in the viewfinder are clearly focused. The control is a litttle knob on the sied of eye-piece. While looking through the viewfinder, turn the knob until it is focused. Hope this helps. NewMediaMan

Jun 25, 2007 | JVC GR-D250 Mini DV Digital Camcorder

1 Answer

Picture still blurred on record mode

Your problem sounds like a focus problem. Could be that it's on manual focus and you're hitting the sweet spot only in full zoom? From the manual: 1. Set the power switch to CAMERA mode. 2. Turn the MENU DIAL up or down until the FOCUS is highlighted and then press the ENTER button.  M. FOCUS(MF) will display. 3. Turn the MENU DIAL up or down until the object is in focus.  Zoom out a little if focusing is difficult. 4. To return to AF (Auto Focus: ), press the ENTER button again. Hope it works out, let us know!

Jun 03, 2006 | Samsung SC-D103 Mini DV Digital Camcorder

1 Answer

Focus Problem

I have the C740, which I believe works very similarly if not identically. Unless you have the camera in full time auto focus, I don't believe it actually focuses on the subject until you've pressed the shutter button half way. Until then, the subject may look in focus in the viewfinder, but is not. When you fully depress the shutter in one motion (rather than pressing half way first), the camera will attempt to focus before it takes the shot. If you are not careful about camera movement, you may inadvertently be focusing on something other than what you intended. My camera (and it seems all digicams) has trouble focusing in low light, so you definitely want to use the half press in such situations. Even then, I don't always get the focus correct. Thank the digital Gods for instant feedback! Personally, I almost always use the half press method. To get the 740 in manual focus, you hold the "OK" button down until you see the viewfinder display a focusing scale. It takes a second or so. You should also see "MF" and "AF" designations in the lower left corner of the viewfinder when the scale displays. Use the left and right arrows to select the focus mode you want (i.e. MF or AF), then use the up and down arrows to adjust the focus distance. You'll notice that the area you are focusing on is enlarged when you use the up and down arrows.

Sep 13, 2005 | Olympus Camedia C-750 Ultra Zoom Digital...

1 Answer

Focus on a particular subject

Try the FOCUS LOCK feature. This feature allows you to focus on a subject roughly the same distance away from you, then re-compose your picture without losing that focus. Open the lens barrier fully. Look through the viewfinder at the AF Target Mark (the 4 lines in the center of the viewfinder). Position the AF Target Mark on a subject roughly the same distance away from you. Press the shutter button halfway until the green lamplights. While keeping the shutter button pressed halfway, re-compose your picture, then press the shutter fully.

Sep 01, 2005 | Olympus D-575 Zoom Digital Camera

Not finding what you are looking for?
Panasonic Lumix  DMC-FZ50K Digital Camera Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Cameras Experts


Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75032 Answers

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides