Question about HP OfficeJet 6110 All-In-One InkJet Printer

1 Answer

Blank Pages Printing

My HP 6110 is connected via USB cable to a Dell XPS M1210 Laptop. Operating System is Windows XP Media Edition. When I attempt to print, the printer sounds as though it's going to print, but then nothing but blank pages come out. I have this problem with every program I've tried - MS Word, Notebook, etc. The printer can successfully print a self test, so I know there's nothing wrong with the printer itself and the print cartridges are both new. I've gone through the limited amount of help offered in the troubleshooting section of the printers/faxes tab of control panel. I've shut printer and computer both off several times. Still nothing works. Please help.

Posted by on

  • 2 more comments 
  • Sassysal Jan 13, 2008

    It was only used as a fax machine because I had another printer available until recently. I downloaded the print driver off the HP website and installed it onto the Dell. Everything seemed to go fine with the install, but now I can't get it to print anything.

  • Sassysal Jan 13, 2008

    It's the first and only printer ever connected to this laptop. There's a little checkmark next to the the icon for this printer signifying it's set as the default. Thanks for trying, but the problem is more complex than it not being the default printer.

  • gleasonll Oct 09, 2008

    I have the same problem with my HP6110 AIO connected directly (USB) to my Dell Dimension 9100. I share this printer on a home network and can print to it from my laptop. It just prints blank pages from the desktop. I have uninstalled the printer, HP software, and reinstalled a couple of times. Nothing seems to solve the situation.

  • networkmagic May 11, 2010

    Was this printer working ok before the problem appeared, or is it a new printer that has never worked right?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 139 Answers

Does the printer show up under "Printers and Faxes" on your PC? Click on Start / Printers and Faxes see if it's there? If you see other printers in the "Printers and Faxes" your 6110 listed as the Default printer...that the icon for your printer marked with a small checkmark?? Is there more than one instance of your printer in the "Printers and Faxes" window? If so, you should delete all but one and make sure the remaining one is marked as the default printer.

Posted on Jan 13, 2008

  • networkmagic Jan 14, 2008

    HP's new printer diagnostic utility may be helpful in this case. You can find a link to it near the bottom of this HP web page



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Dell XPS M1710 laptop that was originally Windows XP (maybe Media Center Edition, I'm not sure) and had Windows 7 Ultimate on it. I had to wipe the hard drive and I downgraded to Windows

Hello the driver can be downloaded here:

Or here at nvidia:

Please check for other drivers missing in the device manager.
Check also for the right driver, because here is 2 different ones.

Try the nvidia page first, this should work for you.

Good luck

Mar 09, 2013 | Computers & Internet

1 Answer

I need Dell XPS 1210 boot/start disc

Go to the Dell WEB site and request or download a recovery CD for your model notebook.
You can download the device drivers from Dell WEB site,the support download page. Make sure you select your model desktop or laptop,better still, type in the Service Tag number, it is printed on the label on thebottom of the laptop and on the back or sides of a desktop. (If the Service Taglabel is missing then go into the BIOS setting and on one of the BIOS pages,the Service Tag number will be displayed). This will open the page where thespecific drivers for your model computer are located. Also make sure you selectthe Windows of the drivers for your Windows operating system. Click on thislink to download the drivers: -

May 09, 2012 | Dell XPS M1210 Notebook

1 Answer

Hello, i have a dell xps m1210 laptop. i was using my computer and when i want to restore to factory settings i was using ctrl f11 combination and restoring back. but i now installed windows 7 on c drive....

No the hidden partions rely on the main partion to have some files still intact to complete a repair of the operating sytem then restores the files back to thair factory settings, to put xp back on you will need the factory recovery cd or dvd. If you buy a copy of xp and install it then ust eht recovery it should restore it to factory with drivers as well.

Jul 01, 2011 | Dell XPS M1210 Notebook

1 Answer

I was watching a video in my Dell XPS M1210 when it suddenly stopped and the screen when blank. I unplugged it and tried to switch on but I still get a blank screen but the power button has lights as well...

The inverter or backlight on the display may have gone out. Connect an external VGA monitor to the laptop. If it works, then the display has a bad inverter or the backlight CCFL lamp went out.

Nov 12, 2010 | Dell XPS M1210 Notebook

3 Answers

Tried to get rid of login screen - but it now demands a password!

BIOS passwords are removed by removing the CMOS battery temporarily from the motherboard. Windows passwords are reset with this CD:

Nov 02, 2009 | Dell XPS M1210 Notebook

1 Answer

Dell XPS M1210 broken

I'm thinking you might be having a hard drive problem or the file structure is really messed up.
You had Win 7 and tried to install Win XP. Now it is confused, no doubt.
Here's the first thing I would do:
Put in your Win XP disk and boot from it.
At the first question it asks (about repair or install) choose repair.
It will then ask you which Windows Installation--choose #1 if it's there.
Hit enter if it asks for your password.
Now at the command prompt, type chkdsk /?
Depending on your version of XP, it will show you the switches you can use. Use the one that checks the entire drive. Might be chkdsk /P or maybe /F
Anyway, use the one that does the whole drive and let it run. Then try your reinstall unless you have file problems that aren't fixed.
BTW--your Dell should have a utilities option if you hit F12 at startup that will allow you to check your hard drive.

Oct 26, 2009 | Dell XPS M1210 Notebook

2 Answers

Motorolla phone tool for xp windows media cetre

Check your installation manual or software requirements if media centre is supported for motorolla phone tools.

I ran a check and the following operating systems are supported:
32-bit or 64-bit version of Windows 2000®, Windows XP®, or Windows Vista® Operating system.

If you really need to install this tool then i suggest you partition your harddisk and install either of the supported operating sysetm

May 21, 2009 | Computers & Internet

1 Answer

Laptop hangs during video-call

Go to Dell support website and check for latest video, & audio drivers and BIOS.
Check back quarterly as Dell is quite good about rolling out updates on a regular basis.

May 12, 2009 | Dell XPS M1210 Notebook

1 Answer

I want to Restore it to factory settings

The best way is with the Operating system disc and do a fresh install, thus wiping all installed programs and data files.

May 08, 2009 | Dell XPS M1210 Notebook

1 Answer

Getting error when trying to fax or scan

The L7580 is not meant to be set up as a scanning device on a network. This unit can only function properly as a USB connected device to have all the features work. Also, for the software to install with out problems, all other All in One software fro previous HP printers need to be removed. Once we did that and did clean install using USB only then did it work.

Mar 03, 2008 | HP OfficeJet Pro L7580 Color All-in-One...

Not finding what you are looking for?
HP OfficeJet 6110 All-In-One InkJet Printer Logo

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides