Question about Maytag 24 in. MDBH950AWS Built-in Dishwasher

2 Answers

Maytag quiet series model #:MDBH950AWB

The dishwasher lights are all blinking, it starts randomly, like one in every 50 times you press the buttons. I have unplugged it to reset several times. Nothing is working. I'm looking for a solution to blinking lights and it not starting. is there any other way to reset the controls????

Posted by on

  • 2 more comments 
  • kklemp Jan 25, 2008

    I have the same problem.  I can't start my dishwasher at all. Sometimes the lights work and sometimes the middle round area has flashing lines that change positions and right now there are no lights at all.  No matter what when I press start/cancel nothing happens!  I can't change the settings either.  It's like it doesn't even feel me pushing the buttons.

  • braino Apr 03, 2008

    Experiencing exactly the same problem. It started last week and by holding down the lock key I got it to work. Now the whole panel is dead, no lights and of course the dishwasher does not start.

  • snugglemom Mar 24, 2009

    I have Maytag MBD8600AWW quiet series 300 & my lights come on but the dishwasher does not start. It is only 2 years old. HELP!!!

  • Anonymous Mar 26, 2014

    LIGHTS LINKING ARE: wash cycle light, start/resume light, and cancel/drain

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have a Legacy Series Maytag Quietseries 200, and you can reset the panel by pushing and holding the "start" button until the lights flash and the cycle begins. Just realize that once it resets, you will have to let it run the full cycle.

Posted on Nov 18, 2011

  • desirae May 03, 2013

    How long do you have to hold the button for? I held mine down for 25-30 secs and still nothing?

×

Ad

The dishwasher lights are all blinking, it starts randomly, like one in every 50 times you press the buttons. I have unplugged it to reset several times. Nothing is working. I'm looking for a solution to blinking lights and it not starting. is there any other way to reset the controls????

Posted on Jan 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dishwasher the maytag quiet series 300, will not respond to the start button


Find your circuit breaker for your dishwasher and turn it off for 3-5 minutes. Turn it back on, then turn on your dishwasher. If this works, after the complete cycle of your dishwasher, you have to turn it off manually by pressing "on" botton then press it 1 more time to cancel; this will turn off. The defect is, probably the moisture built up in the control board causing it to ground some of the connections. Suggestion for the manufacturer, insulate the control board to prevent absorbing moisture.

Jan 04, 2013 | Maytag Dishwashers

1 Answer

My Maytag Quiet Series 300 light is blinking 5 times by the lock button. It won't do anything else other than blink 5 times if any other button is hit. Help!!


When Control Lock is lit, all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
5 times. The dishwasher door can be opened while the
controls are locked.

To turn off Lock, press and hold Heated Dry for at least
3 seconds.

Dec 30, 2009 | Dishwashers

3 Answers

1.5 year old Maytag Legacy Series Quiet Series 300 Lock Light on


Hold down the heated-dry button for 3 seconds and the light will clear.

Nov 07, 2009 | Maytag 24 in. MDB9750AW Dishwasher

4 Answers

Maytag Quiet Series dishwasher won't start


Sounds like you have a bad Control Board

http://www.partstore.com/Part/Maytag/Maytag/MDB6600AWW/Maytag/Maytag/99003160/New.aspx

But with the price it cost, you might be better off buying a new dishwasher, preferably a different brand, cause that washer has some bad reviews

Oct 12, 2009 | Dishwashers

2 Answers

Maytag Quiet Series 300 Legacy Series Dishwasher


Mine was doing the same thing and I just pressed and held down the heated dry button until the light went off. Then I was able to start my machine as usual. Hope this works for you.

Mar 12, 2009 | Dishwashers

1 Answer

Blinking Clean and Rinse lights on Maytag PD8460AWN


My Maytag PDB4600AWN quit working with a flashing CLEAN light and RINSE only button. I took off the bottom panel and took out the electrical diagram.

I ran the diag test, tried pulling power, and a series of other ideas just to see if the error always pointed to the same thing and it did. It's the motor pump. My Maytag is 10 years old. Not sure what yhe life span of such things are. My Mom had a Kenore dishwasher that ran 17 years. Don't think that happens anymore. I bought my Maytag laundry washer and dryer at the same time as my dishwasher and they have trouble now also. Guess those TV commercials were a little on the iffy side of truth. Hee heeeeeeeeeeeee. :)

I think I'll just buy a new dishwasher. The repair guys bill will be high enough that I may as well
buy a new dishwasher.

Cheers

Feb 06, 2009 | Kenmore Dishwashers

2 Answers

Maytag quiet series 300


Maytag Quiet Series 300. The lights flash in sequence starting from the outside traveling inward. The timer counts backwards from 50 to 1. Then the sequence starts over. and continues over and over. I'm able to clear it when the time reaches 1 or 2. It stays off for a while (3-4 hours) then starts over. I can not clear the countdown until it reaches 1 or 2. After I clear it the dishwasher will work, but until then, no way. This happens with the door open or closed.

Sep 15, 2008 | KitchenAid 24 in. KUDI02IRBS Stainless...

3 Answers

All the lights are flashing on Maytag Quiet Series 300


Try pressing heated wash, heated dry, then heated wash, heated dry. It should reset it. Also try pressing and holding the cancel button for 5 seconds to see if that works if the other doesnt.

Sep 23, 2007 | Maytag 24 in. MDB5651A Built-in Dishwasher

1 Answer

Maytag dishwasher mdbh950awb


Sounds like you have a control panel and/or control board issue. Normally when operator functions fail or "halfway" work the main control board, associated keypad, or wiring are the likely suspect. Now...another remote possibility could be the door latch not closing properly. However, this would affect ALL functions. I hope this helps you.

Jul 31, 2007 | Maytag 24 in. MDBH950AWS Built-in...

Not finding what you are looking for?
Maytag 24 in. MDBH950AWS Built-in Dishwasher Logo

3,950 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Carmen Mikulic

Level 2 Expert

415 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...