Question about Motorola Mobility H700 Wireless Headset

1 Answer

How do I use bluetooth

My phone will recognize bluetooth connection is there but the light on the bluetooth continues to flash blue and when I make a a call I cannot hear anything on bluetooth

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 125 Answers

First you have to "Pair" the bluetooth and the phone. Then make sure that the bluetooth function of the phone is turned on before you turn on the bluetooth.

Posted on Jul 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What if my uproar wireless headphones are flashing red and blue ?


The headphones flash blue when u switch it on.If it flashes blue and red, it means that it is in bluetooth connection mode.So u can connect it with bluetooth devices by switching on bluetooth on your phone or pc.After connecting the red light stops flashing automatically and blue light starts blinking.Hope you understood. :)

May 04, 2016 | Audio Players & Recorders

2 Answers

I can't connect with my phone


Please follow the detailed instructions below for the proper pairing of the headset with your phone.

CHARGING

Before using, you must first charge your headset.
20 minutes = minimum charge
2 hours = full charge
Light is solid red when battery is charging.
NOTE For the best user experience, keep your headset fully charged.
CAUTION Do not use headset while charging and do not connect the charger while the headset is in use.

POWERING
Press the control button for 2 seconds to power on. Press the control button for 3 seconds to power off.

PAIRING
Step One:
Prepare Phone- Turn on Bluetooth For most phones, go to Settings/Tools menu and select Bluetooth or Connectivity and select "On."
Step Two:
Prepare Headset- Pairing Mode Begin with headset turned off. Turn headset on (hold call control button for four seconds until the light flashes blue) and it will automatically go into pairing mode, flashing red and blue.
Step Three:
Pairing- Add Headset to Phone For most phones, go to Settings/Tools
> Bluetooth > Search or Add a Device, then Select "220Plantronics." For passkey enter
0000. Headset will flash blue when paired successfully. It is now powered on and ready to use.

NOTE: Normally you only need to pair the headset and handset once. If headset has been previously paired with another device, follow pairing instructions below.

If headset has been previously paired with another device, please follow these instructions for pairing a second time. Be sure the headset is fully charged.

Begin with headset turned off.
1. Press and hold down the call control button for 8 seconds until the headset status
indicator begins to flash blue then red.The headset is now in pairing mode for the next 120 seconds.
2. While the headset is flashing,use the phone menu to search for Bluetooth devices and select "220Plantronics."
3. When prompted for a passkey, enter 0000. Headset will flash blue when paired successfully.

NOTE: The headset can pair to multiple Bluetooth devices, but will only connect to one device at a time. The headset will automatically connect to the last device to which it was connected.
Please don't forget to rate me if satisfied.Thanks for choosing Fixya.Good Luck.

Jun 11, 2011 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

What is the pairing security code for xx3 plantronics


The following are detail instructions on how to Pair (sync) a Plantronics Bluetooth Headset to your Bluetooth Cell Phone:

1 - You need to go into the device you wish to pair it and turn the Bluetooth feature first.

2 - Then you need to place the headset in pairing mode so your phone will find it.

Find your model headset in the instructions below. Once the headset is in "Pairing" mode you will then need to follow the instructions in your cell phone or Bluetooth device's user guide on how to go it to your phone and search for the headset & pair it to a Bluetooth headset.

The passkey is 0000 (4 Zeros) except models M1000 and M1500 (see below for their number )

For the Plantronics M3000/M3500 (discontinued):

Pressing and holding down the volume up key and the talk button at the same time. Hold them in together until the indicator light on the headset starts flashing red then green.

For the Plantronics 510 Voyager:

510_small.jpg

Pressing and holding down the call control button and holding down the volume up at the same time until the indicator light on the headset starts flashing red then blue.

320_128.jpgexpl330_128_blue_pop.jpg340_small.jpg

Plantronics Explorer 320,330,340 & 350

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

dis655_128_blue_pop.jpg 665_small.jpg

Plantronics 655, 665

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.



discovery645_small.jpg

Plantronics Discovery 640, 645, 640e

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

plantronics-590a_small.jpg

Plantronics Pulsar 590/590e & 590A & a Bluetooth device:

Begin with the headset turned off. Press and hold the call control button then power the headset on and when the indicator light flashes red and blue, release the call control button. Once the headset is paired successfully the headset will flash blue.

pulsaradapter.jpgFor the Plantronics Pulsar 590 & 590A & the Universal Adapter: Begin with the headset turned off. Press and hold the call control button. Power the headset on and when the indicator light flashes red and blue, release the call control button. Turn the Universal Adapter on. Press and hold the adapter pairing/connect button for 7-10 seconds. When adapter starts flashing red and blue release the buttons. The headset and adapter will flash blue when paired successfully.

pulsar_260_128.jpgPlantronics Pulsar 260

For the Plantronics Pulsar 260, Begin with pendant powered on.

Press and hold both the mute/play/pause button and the power on/off/pairing button simultaneously. When the
indicator light flashes red and blue, release buttons. While pendant is flashing red and blue, use the phone menu to search for Bluetooth devices and select "260 Plantronics." When prompted for passkey,
enter 0000.

m2500.gif
For the Plantronics M2500 (discontinued):

Start with the headset powered on. Press and hold down the call control button while also rotating the multi function dial upward (away from the light) until the indicator light on the headset starts flashing red then green. When prompted for passkey, enter 0000.
m1000.jpg
For the Plantronics M1000 (discontinued):

Hit and hold the volume/mute switch in until the indication light starts blinking.

m1500.jpg
For the Plantronics M1500 & A500 adapter (discontinued): Turn the headset on and the adapter off. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds. The light on the adapter will flash once after 3 seconds- continue to hold the power button for another-7 seconds until the light flashes red. If the pairing is successful, the headset will sound a tone and both the headset and adapter lights will turn off.

For both the Plantronics M1000/M1500 (discontinued): If you remove the battery cover from the headset and then remove the battery itself. On the Green PC board itself there will be a letter followed by 4 numbers. These 4 numbers are your personal PIN code.

You can also use the Plantronics Bluetooth Pairing Guide

Feb 05, 2011 | Cell Phones

2 Answers

My em228 flashes blue red why?


It is NOT the battery. When you turned the bluetooth on, only hold the power button until the blue light flashes about 3 times. If blue tooth is enabled on your phone, this should allow the bluetooth to connect without having to search for any devices, that is, if you already have it in your settings.

The red and blue alternating lights are to setup the bluetooth and allow it to connect to your phone, THE FIRST TIME. Once the device is listed in the bluetooth settings on the phone, you can just connect, instead of searching for the device every time you need to turn it on.

Only hold the button until the bluetooth flashes BLUE, about 3 flashes........see if this works better for you.....

Another frustration, (sometimes) depends on what brand of phone you have. I know my EM227 connects differently between my DG Razr and my Samsung Eternity.

Let me know if this helps, and if not, let me know what phone you have, and I will tell you for sure, exactly how to turn on and connect, with no problems.

Good luck~~!

mstipps@yahoo.com

Nov 18, 2010 | Emerson EM227 Bluetooth Headset

1 Answer

Phone wont recognize bluetooth


When you say "phone wont recognize bluetooth", do you mean that the phone can't find it, or that it finds it but doesn't complete the pairing? It could be that that headset is not completely in pairing mode. It should have either flashing blue or flashing red/blue or solid blue.

Sep 09, 2010 | Motorola Mobility H710 Bluetooth Headset

1 Answer

Trying to set up my motorola h350 bluetooth to my samsung s30 phone.


Hi,
Turn your H350 on by pressing and holding the black "Talk" button on the side of your headset. Hold it until the blue status starts to flash. To turn the H350 off, simply hold the talk button until the headset turns off.

Pair your headset with your cell phone by entering into your cell phone's bluetooth menu--Menu > Settings > Connection > Bluetooth Link > Setup (see Resources below).

Put your Motorola H350 into pairing mode by holding the "Talk" with the device turned off. Hold the button until the status light on the side of your headset begins to flash, and turns back into a solid blue.

Back in your phone's bluetooth menu, choose the option to "Search/Discover" bluetooth devices. And when your phone recognizes your H350, select the headset and enter "0000" as the passcode.


Thank You

Sep 05, 2010 | Motorola Mobility H350 Wireless Headset

1 Answer

Hbhpv708 when i press any button the red light glows the headset is on phones will recognize the headset but connecting to it will fail resetting also not working


Hi, Before any bluetooth will connect to any phone, the red or red and blue light must flash back and forth. Make sure you're phone is in the set-up mode to recognize the phone. The easy way to do this if you dono't have directions, is to get the name and numbers off of the bluetooth and go online to find it. It will walk you through the steps to connect it to your phone. I have done this with many different models if all else fails. Give it a try and let me know what happens. This will solve you're problem,
Shastalaker7

Jan 29, 2010 | Sony Ericsson HBHPV708 708 Bluetooth...

3 Answers

Cannot get S9 to connect to phone or computer


From Falvey86: Hold the headset start button for about 10 to 20 seconds, the lights will start flashing red and blue, then the search for Bluetooth devices from phone and it will appear as: S9. press "connect", a window will appear, place the password "0000", that should do the trick!!!!

Feb 27, 2009 | Motorola Mobility S9 Headphones

4 Answers

4pr909 bluetooth headset passcode won't work with samsung juke


had same problem with this headset on two phones and finally solved it.

1. make sure bluetooth on phone is activated (know that sounds silly but some people forget)
2. with the headset turned off, press and hold the on/off button on the headset until the light on the headset FLASHES CONTINUOUS BLUE AND RED (about 8 seconds). This is most important, because if lights on headset are not continuously flashing blue and red, the headset is not in discovery mode.
3. once headset is in discovery mode, go into "my devices" on bluetooth menu on phone and click to search for new devices. make sure phone and headset are close together. phone will say searching- BE PATIENT, THIS STEP TAKES THE PHONE SOME TIME. eventually phone will show that it found your headset.
4. once the phone lists the headset, click on the headset and tell the phone to connect to the device. at this point the phone will bring up a passcode screen. enter 0000, and tell it to connect. when it connects, the lights on the headset will automatically go to an intermittent blue. you should be all set.

the biggest mistakes my kids made trying to pair these headsets were:
1. failing to turn bluetooth on for the phone
2. turning the headset on in something other than discovery mode (continuous blue/red flashing lights)
3. not being patient enough to wait for the phone to find the device.

hope this helps

Dec 21, 2008 | Cell Phones

2 Answers

I need instructions how to connect my h350 blue tooth to my lg cu400 cell phone


With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit.

Note: The blue light will flash as you press and hold the Call
button. Continue holding down the Call button until the blue
light is steadily lit.
Note: If you let go of the Call button before the blue light is
on and steady, ensure that your headset is off before trying
again.

The default PIN or passkey is 0000 (4 zeros)

You need to enable bluetooth on the phone and go into pairing mode, search for devices or similar

HIH

Jul 12, 2008 | Motorola Mobility Bluetooth Hands Free...

Not finding what you are looking for?
Motorola Mobility H700 Wireless Headset Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Radio Communications Experts

Coss

Level 3 Expert

1056 Answers

Brad Brown

Level 3 Expert

15128 Answers

Dennis

Level 2 Expert

183 Answers

Are you a Motorola Mobility Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...