Question about Microsoft VIEW ERA 19 V191HD LCD 500:1 .29 1280X1024 12ms W/DVI (Silver/Black)No dead pixel guarantee. Monitor

2 Answers

.ct 2070 display not clear

Hi, we have the lct 2070 akai monitor. I have hooked it to the computer and its working but, the fonts are not clear. I have worked with contrast and brightness etc. on the monitors menu but cant seem to get the fonts clear. thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers
Re: .ct 2070 display not clear

Are all the fonts unclear?

Even when you open a document such as word and notepad?

If the answer is yes, it might be that you've got a problem with your windows setting. maybe you should try adjusting as follows:

>click on properties on your desktop
>click on the appearance tab
>click on effects button
>check the box "Use the following method to smooth edges of screen fonts"
>click on ClearType

Posted on Feb 24, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: .ct 2070 display not clear

I think this is a TV monitor with a built-in TV tuner. I doubt if it is optimized for use with a computer, but it might be.

Posted on Dec 28, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Acer wide screen monitor 20'' font and images all

Right click on the desktop in a clear area and scroll down to either resolution or properties. From this you can experiment with resolution settings to see which setting best fits your display. After each setting change the computer will ask you if you want to accept the changes, it will give you 15 seconds for each change.

Jun 26, 2010 | Acer AL2016W 20" LCD Monitor

1 Answer

Cant hardly read the screen the printing is so small and a little fuzzy

Change the display font size. In Win 7, right click on the desktop and choose Screen Resolution then choose make Text and other items larger or smaller. This brings up Windows Appearance and Personalization > Display (small, medium, large buttons). With Win7, you can also turn on Clear Type for LCD displays.

The earlier versions of Windows have the same display font option but it may be a subset of the Accessibility Control Panel. Macs probably have a similar control in the OS.

I hope this helps.

Cindy Wells

Apr 17, 2010 | Compaq Computer Monitors

1 Answer

Need to increase font size without effecting pixel clarity

The first step for optimal readability is to set your PC's graphic output to the native resolution of your monitor.
The Samsung 2033SW is a little unusual in this regard since it provides a matrix of 1600 x 900 pixels, which is not very common.
If your graphics board has DVI output, I'd also make sure to use a DVI cable to connect to the monitor instead of VGA.

Windows XP and above support a font rasterization technology called "ClearType", see This page also provides references to the ClearType tuner PowerToy for XP, which is available to Windows users at no extra charge. Windows 7 has a control panel for ClearType out-of-the-box.

If you still need to increase font size, you can increase it from the Display Control Panel, too, "Medium" font size scales to 125'%, "Large" fonts to 150% the normal size.. Changing the DPI (dots per inch) setting in the monitor control panel cannot be recommended since some software cannot cope with alterations here (dialog boxes or user interfaces with text in wrong places or sticking out of the window... yeeks.)

Feb 07, 2010 | Samsung Syncmaster 2033SW Monitor

1 Answer

I have a rather new Samsung Syncmaster 2070

You neeed to connect the monitor to another PC to rule out the monitor as being damaged. If the monitor checks out good, the video card on your PC may be the problem. Does your motherboard have on-board video? If your not sure, can you give me the make and model of your PC tower?

Jan 03, 2010 | Computer Monitors

2 Answers

At start-up, Sceptre X7 monitor flashes on, then goes black. Must turn computer on and off numerous time before monitor will stay on. How can this be fixed?

Hi Friend,

You need to check your display setting in your computer..i mean to need to click on desktop then properties then display then screen saver then change the time.....

Dec 20, 2009 | Sceptre X7G-Naga 17" LCD Monitor

1 Answer

Pc stops working/ganging after font size/pixel of

go to my copmuter--->right click--->properties.
Click on the HARDWARE tab ---> Device manager
click the (+) on display adapters and see the name of your video card.
Go online and download the relevant display update.
should solve the problem.
good luck.

Jul 11, 2009 | BenQ T900HDA Widescreen Monitor 18.5 inch...

2 Answers

How can I make fonts look good in an LCD monitor ?

The VGA connection should be fine; I have DVI and when I switched from analog, the difference was pretty minimal, to my eyes.

Is it just the fonts that are blurry, or everything? If fonts only, then this almost certainly suggests that running the ClearType tuner again would solve the problem. But this applies to all displays, so if one is good and the other is not, then this isn't it.

If everything is a little blurry, then this suggests one of two problems -- the first, you report trying, which is that the display adapter is set to a different resolution than the native resolution of the LCD monitor itself. Your display adapter should probably be able to drive 2 monitors (the built-in laptop monitor and the external monitor) at once. You should be able to set their resolutions separately.

Assuming Windows XP: Start > Control Panel > Display > Settings > at which point, you should see two monitors listed in a dropdown. Set them to their native resolutions there (using the slider bar, usually all the way to the right), and save.

If you do have the display resolutions set to their native resolutions for both monitors, then it's possible that your external monitor is messed up. A quick test would be to run the on-screen settings, usually from a button on the monitor itself. If what is displayed there is sharp and what is displayed from Windows is not, then this points to a problem with the display driver. If everything, even the on-screen display is blurry, then perhaps the monitor settings are messed up -- usually there's an option to restore to factory settings -- try that.

If that doesn't work, I'm probably out of ideas, unless you have further information.

Mar 08, 2009 | LG Flatron L1750S 17" LCD Monitor

1 Answer

One monitor clear the other not good fonts

I installed a better video card that supported dual monitors without splitting the signal.

Nov 19, 2008 | Advueu Technology ADV178T 17" Flat Panel...

2 Answers

Unclear fonts and images


Pls reinstall the drivers for the graphics card and restart the computer and check if it is working.
If it does not work, then download the original drivers from the computer manufacturer or the graphics card manufacturer 's website and install them. Make sure that you have uninstalled the drivers before reinstalling any drivers.
Also pls look for any updates for the graphics card.

Feb 26, 2008 | LG Studioworks 45 14" CRT Monitor

Not finding what you are looking for?
Computer Monitors Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computer Monitors Experts

Terry Allen
Terry Allen

Level 3 Expert

680 Answers

Alex Hernandez

Level 1 Expert

56 Answers

Gregg Errera
Gregg Errera

Level 1 Expert

36 Answers

Are you a Microsoft Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides