Question about Projection Televisions

1 Answer

Have a C2144S Hitachi TV and need to tune the AV channel in. Have lost instructions. Can you help?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: Have a C2144S Hitachi TV and need to tune the AV...

Depending on the remote you have, look for an [INPUT] button or an [AVX] button, if your remote has a slider switch, make sure it is set to TV first

Posted on Jan 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a 19" hitachi L19HP03U tv. I av the same problem as opus29jane in June cannot store any channels on my tv. Not computer literate don't no what to do HELP

Here is a web site I found with a manual. May help you out.
Please make sure you are either connected to your Digital TV antenna to do this. Cable and Direct TV have their own boxes and you wouldn't need to store any channels. These boxes would connect to your HDMI input or Component Red, Green and Blue RCA connectors.

Nov 12, 2014 | Projection Televisions

5 Answers

Telefunken analogue color TV model MP-A2055VT-H to connect up digital decoder set-top box. The TV only has an RF input. no other plugs. Searched all 80 channels and I cannot find an AV channel on the...


The simplest solution would probably be the use of an RF Modulator. Feed the RF Mod with the A/V signals from the Conia CSTB12, set it to transmit on Ch 3 or 4, tune the Telefunken to either channel.

In most Telefunken TVs we have worked on, the A/V INput/OUTput would be on the SCART connectors as shown below.
To my understanding, a Conia CSTB12 as sold in Australia has a composite RCA (yellow) Video OUTput and L/R White/Red audio OUTputs. What would be needed would be a A/V signal to SCART adapter/converter.
If your Conia CSTB12 has an S-Video, then this may be used.
If your Conia CSTB12 has an HDMI, then something like this may be used.
Incidentally, should you be interested, there are comparable receivers to a Conia CSTB12 that has SCART OUTputs.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Sep 14, 2008 | Projection Televisions

1 Answer

How can you can put av on

input button on the front panel of tv. Or on remote, or below channel 2 will be av.

Nov 27, 2011 | Hitachi 57F500 57" Rear Projection...

1 Answer

I just set it up (it is used) and I can't get to the "Channel Manager" in the setup menu, as it is grayed out. I can't auto program because of my inability to access this menu function.

Channel menu will be grayed out if tv is set on AV Input, select TV source by remote or press any channel number to set tv on tv source, this will enable channel manager/ menu to tune channels in tv.
Hope these info will help you.

Nov 25, 2010 | Hitachi 51F59 51" HDTV Projection...

1 Answer

Loss of some channels on 32LD30U B

Weak digital signal. Either antenna or tuner.

May 03, 2010 | Projection Televisions

1 Answer

Change from TV mode to AV mode for a Hitachi C28W4110SN

There should be buttons somewhere on the TV itself to switch input modes. Look around where the power button is located and see if there is a menu button you can access. Then use channel up/down and volume up/down to scroll thru modes to find input

Hope this helps

Apr 27, 2009 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

Hitachi T.V. remote CLU3842WL will not change channels.

There are two possibilities: either the channel memory has been lost due to the TV being unplugged for an extended period or the digital tuning system has a defective component. First thing to do is go into the TVs menu system and try to re-scan the channels. You may find that you can change channels after doing this. If its still not changing channel, the digital tuning board will have to replaced.


Feb 15, 2009 | Hitachi Projection Televisions

1 Answer

Digital TV Tuning problem

I would try letting the set autoprogram again.

Mar 07, 2008 | Projection Televisions

1 Answer

Tune playstation 3 to toshiba television

first try to manuall select your av channell from your tv's remote control,if this won't work try another scart cable or port on your tv set

Dec 26, 2007 | Toshiba 55H70 55" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

57068 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides