Question about Zonet 1-Port USB 2.0 10/100 Mbps Print Server (ZPS1001) Print Server

1 Answer

Epson stylus C44UX and zps1001 zonet print server

I bought the print server, set it up following all directions. on the device the power and lan lights are green, but the USB light wont turn green. the web config detects my epson printer giving this screen:

Printer Manufacturer : EPSON Printer Model : Stylus C44 Printer Command Set : ESCPL2,BDC,D4 Printer Status : On line
but the ps-utility wont "discover" my device or let me print from it. i have the printer set up as network on my windows vista laptop, it sends the print command to the printer but the printer doesn't receive it. if anyone needs more information on my problem please ask and i'll see what i can do. i hope somebody can help me! =(

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 353 Answers
Re: Epson stylus C44UX and zps1001 zonet print server

Since it's over a year since we had any response on this, I think we might call it "Solved by Poster".

Posted on Mar 15, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Zonet zps1002 firmware

where can i get the current firmware download for Zonet ZPS1002 print server?

Jul 05, 2012 | Zonet ZPS2102 Print Server 2xusb2.0 &...

1 Answer

Linksys wireless prnt server


Based on your post description, I am assuming that:
1. You can connect to the Internet through your 2241 Neptoia modem;
2. You can access your WRT54G V8 Linksys Wireless router @;
3. Both 1 & 2 above could be done through a wireless connection from your PC.

Connect everything as they are supposed to be wired (printer, Print Server, modem, router etc)

Pls try:
a. Connect the Linksys wireless print server using a lan cable to the Linksys WRT54G Wireless AP/router. (Will tackle the wireless connection a bit later)
b. Reset your print server; &
c. Do a diagnostic print-out.
Instructions for b & c are in page 4 of your manual.

You need to verify that:
i. the Power indicator is contnously green
ii. the Ethernet indicator is contnously green
iii. the USB indicator is contnously green
iv. the Wireless indicator may or may not be contnously green

Pls post back with the generated diagnostic print-out before we can proceed with the other steps.

Additionally, try installing the Epson Stylus Photo RX600 direct to one of the USB ports of your PC. Use the installer/driver CD that came with it. Try using it as a regular printer. This will tell us status of the printer.

Good luck and kind regards.

Nov 11, 2007 | Print Servers

1 Answer

How do I find the new IP address for the Zonet ZSP3611 Printer Server so I can set up my printer to work

An easy way would be to download and install nmap. For the IP address to scan, if your computer ip is say, then enter and select the quick scan. Whichever device comes back with an open port of 9100 is most likely the print server.

May 08, 2012 | Zonet ZPS3611 Print Server

1 Answer

I cannot connect to my 3Com OfficeConnect Wireless (3crwps10075-us) Print Server 3crwps10075

Check you firewalls. Sometimes you will have to allow certain mac addresses or certain ip addresses (may be less secure than the mac address), then change sharing level to full, before things begin to work.

Please post back and let me know if this helps!

Feb 21, 2012 | 3Com OfficeConnect Wireless...

1 Answer

I've connected the Zonet PS to my Linksys router and the light on the router is green. The PS wizard does not see it from either my wired PC or wireless laptop. Is there a setting on the Linksys router I...

ZPS2102, ZPW1000, ZPS1000 :: Trouble shooting tips for finding the print server using the utility

supporting troubleshooting links
? A: Please check the connection link light.

Temporarily disable all firewalls on your system even the Windows XP firewall
(for instruction to disable XP firewall, please go to )

Power cycle the print sever by unplug the power at the back (10 second).
The print server default IP is
Set the computer which has the print server utility installed to have an IP of

(Test ping the print server / --
If print server is respond to ping, using web browser with the address of will also beable to configure the print server)

Run the utility/hit the refresh button to find the print server again.
The CD has two installation methods:
1. The Auto run will run the utility.
2. By manually install the program into your system. (Browse CD to the folder: manual installation.)
It is recommended to use the 2nd method and run the PSAdmin utility from the system's programs after the installation is completed.
If it still could not find the print server, direct connect your computer to the print server using cross over cable and run the utility again to find the print server.
When it finds the print server, change the print server IP( to a unique static IP your router can accept. Put the print server back to the network, change back your computer's IP accordingly and try ping the print server with the new IP or run the utility again.

For wireless print server, it is recommended to use Ad-hoc connection from a wireless computer to connect to the print server first. (follow the Quick Installation Guide booklet that came with the box on page 8)

Jan 30, 2011 | Zonet ZPS2102 Print Server

1 Answer

Print server PD-301U can not work in Printer

I have one of theses D-Link PD-301U. It soes NOT support most All-in-one printers like yours. According to Epson's Web site, here are the Epson printers it supports (note the TX101 is NOT in the list):
  • Stylus 5700
  • Stylus 5700L
  • Stylus 5800
  • Stylus C60
  • Stylus EPL-5500
  • Stylus EPL-N2000
  • Stylus EPL-N2010
  • Stylus LQ-100
  • Stylus LQ-300
  • Stylus LQ-550
  • Stylus LQ-570+
  • Stylus LQ-1070C+
  • Stylus LQ-2070
  • Stylus LQ-2170C
  • Stylus Color 400
  • Stylus Color 440
  • Stylus Color 460
  • Stylus Color 480
  • Stylus Color 600
  • Stylus Color 640
  • Stylus Color 660
  • Stylus Color 740
  • Stylus Color 800
  • Stylus Color 850
  • Stylus Color 860
  • Stylus Color 900
  • Stylus Color 1160
  • Stylus Color 1500
  • Stylus Color 1520
  • Stylus Color 3000
  • Stylus Photo 700
  • Stylus Photo 710
  • Stylus Photo 750
  • Stylus Photo 870
  • Stylus Photo 1200
  • Stylus Photo 1270
  • Stylus Photo EX
  • Stylus Pro XL
Here is the link to page I am refering to:

May 14, 2009 | D-Link DP 301U (DP-301U) Print Server

3 Answers

Installation of cx5500 epson no installatin cd

You can get the software for the Epson Stylus CX5500 from here:

Just choose your operating system and press Search, then Continue on the next page.


Chris (ziraffa)

Jan 16, 2009 | Linksys WPSM54G Print Server

2 Answers

Installation wizard does not locate the WPSM54G


what is the model number of your printer? if your setup cd is not detecting your printserver, try the ff:

-- while pc and printserver connected to the router and your printserver connected to your printer. try to reset the printserver for 30sec. Is it printing? If yes, do you see any IP address on the print out

-- If no, unplug the power for 5 seconds and plug the power back in of the printserver then try again to run the setup cd. you may also check your routers dhcp server table if its detecting the printserver

-- if printserver still not detected ty to connect printserver directly to your computer

-- search if you have bi admin utility on your setup cd and install it on your pc

-- manually assign static ip address on the printserver using the bi admin utility and on the pc

-- if successful, connect printserver and pc back to the router and check if you can ping the ip address of your printserver

May 01, 2008 | Linksys WPSM54G Print Server

1 Answer

Zonet ZPS1001 can't detect Konica Minolta Magicolor 2400W

Persever. Change your usb points, and at the last resort get the cord from your old printer and use this type of connection. Go slowly thorugh the disc step by step and make sure you delete any previous installations of the print file in the control panel.

Oct 28, 2007 | Zonet 1-Port USB 2.0 10/100 Mbps Print...

Not finding what you are looking for?
Zonet 1-Port USB 2.0 10/100 Mbps Print Server (ZPS1001) Print Server Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zonet Print Servers Experts


Level 3 Expert

18259 Answers

old marine
old marine

Level 3 Expert

1317 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Are you a Zonet Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides