Question about Canon PIXMA MP150 All-In-One InkJet Printer

2 Answers

5200 when i turn on my canon printer the worning led starts to be on and off as the lcd displays problem 5200

Posted by on

Ad

2 Answers

Bloody brillant!!!
tried other ideas of the service menu, MVRAM, CMY,and K INK thing as suggested by others, ....Didnt work. Took out the cartridge, cleaned it ( now totally have black hands and key board because i havent washed my hands yet). Even tried turning the bugger off and leaving it for 24 hours, all with no joy. Didn't think to actually unplug the dam thing.
Thank you, thank you, thank you. ( and i'll go and wash my hands now)

Posted on Mar 01, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The power needs to be reset, so do it and try it again, just take out the usb, the power from the wall outlet and the usb in the printer itself.

Be sure to cancel the print job FIRST, completely unplug the bastard, replug it, turn on, wait a bit for the start cycle then print it again.

I get this error myself sometimes. The above always works for me.

Posted on Feb 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does error 5200 mean?


Assume this is a Canon printer? Try the following:

1. Turn off the printer .
2. Press the Stop button for 2 seconds and hold it.
3. Press the On button, hold it and release the Stop button.
4. Press Stop button 5 times then release together, with the On button.
5. LCD display will blank and now reseting.
6. Computer will detect new hardware just ignore it.
7. Turn off the printer then turn it On.

Jun 16, 2015 | Office Equipment & Supplies

1 Answer

Canon MP-5200 printer will not turn on display


6C10 means you need to replace the ink absorber. After this it require to reset the error. Reset 6C10

Oct 15, 2012 | Canon PIXMA iP4600 Color InkJet Photo...

1 Answer

I have a canon printer IP 2770 .....i try to one my documents and shows that error 5200... what does it mean


Here's How to Reset Canon IP2770 Error 5200:
1. The printer is turned off and plugged the power cord.
2. Press Resume button 2 seconds
then press the POWER button until the green light on (when pressing the POWER button, Resume button ... jgn released first)
3. Then release the RESUME button, but do not release the POWER button.
4. While the POWER button is still depressed, press the Resume button 5 times. Led will light turns green orange with the last glow orange. (do not be mistaken 4x because the printer will die completely, but it is temporary too) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly and then will glow GREEN.
7. And the computer will detect new hardware, just ignore ...
8. Press the POWER button, then the printer will die.
9. Press the POWER button again then the printer will flash and ... IP2770 Printer is ready to use

Mar 23, 2011 | Canon PIXMA IP5200 InkJet Photo Printer

1 Answer

Always time sow Error number; 5200 A printer


Here's How to Reset Canon IP2770 Error 5200:
1. The printer is turned off and plugged the power cord.
2. Press Resume button 2 seconds
then press the POWER button until the green light on (when pressing the POWER button, Resume button ... jgn released first)
3. Then release the RESUME button, but do not release the POWER button.
4. While the POWER button is still depressed, press the Resume button 5 times. Led will light turns green orange with the last glow orange. (do not be mistaken 4x because the printer will die completely, but it is temporary too) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly and then will glow GREEN.
7. And the computer will detect new hardware, just ignore ...
8. Press the POWER button, then the printer will die.
9. Press the POWER button again then the printer will flash and ... IP2770 Printer is ready to use

Mar 16, 2011 | Canon Pixma iP2700 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2146 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...