Question about Radio Scanners

1 Answer

Renault cleo and how to reset my sterio

After a nightmare dealing with Tates the main Renault dealer. We got the car back in a dreadful state (it,s a long story) The upshot of this experience is the we shall never go near Tates again even for for the simplest of tasks... they are total incmpitant rip off merchants.

To the point... When our Renault arrived back one of the many problems is still unsolved. How to reset the sterio code... Ihave done this before but it does not seem to work this time ...I am doing something wrong.

1.I have the code number and have tried to enter the code ...
2.0000 on screen.
3.Pull base tabs of radio control towards me to correspond to first number.
4.Move to next number by pressing base button.
5.Enter next number and so on until code is complete.

If this is correct.... and I am not 100% sure it is
I know that after this, there is another also another procedure here that I am not getting right.

I have ended up with CODE where there was 0000 This has gone back to 0000 twice after my abortive attemps but is noe seemingly stuck on CODE.

Help !!!!!!!! Please

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Renault cleo and how to reset my sterio

Look In The Service Book And It Will Say Radio Code:0987 For Example

Posted on May 31, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

`How can I transfer a digital police scanner that I bought from the United States onto a Windsor Ontario Frequencies for my police scanner? The one from the United states only have there frequencie

it depends on the scanner. if its preprogrammed you may not be able to, or you may have to reset everything and start from scratch... google up the owners manual as a starting point

Sep 28, 2014 | Radio Scanners

1 Answer

Reset bct8 back to factory settings

Turn the scanner off, then hold down the 2 , 9 and HWY (State) button....all three at the same time and then turn the scanner back on. This does a full reset to factory settings.

with radio off, press and hold 2, 9, & hold button, then turn on and hold all three for at least two seconds to reset.

With the scanner off, firmly hold down 2+9+State at the same time while turning the scanner on. (You may have do it several times) When you see (Clear)
its reset.

Dec 24, 2013 | Uniden BCT8 Base Scanner

1 Answer

Radio reference i cant get anymore

Hi Janet,

I'm a little confused by your post, you state radio reference I can't get anymore. Are you referring to or something else?

Yes, to use the site with explorer, you will need flash, but that's not a problem with the site, rather it's a MS issue with their dreaded web browser, Download Firefox free web browser, and it will have flash already installed ready to use on sites where flash is required, I only use firefox, and have never had issues on sites like radioreference, that require flash.

I hope I got your query right and have helped you, if not, please re-post your query with full details of your issue.


Feb 14, 2013 | Uniden BC898T Base Scanner

1 Answer

Reset scanner

Please try this:
If the scanner's display locks up or does not work properly after you connect a power source, you might need to reset or initialize it. If you have problems with the scanner, first try to reset it to retain the memory. Warning: Initializing the scanner will clear all channel memories and reverts it the state it was in right out of the box.To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. 'Please select factory tests. Exit if no key is pressed' will briefly appear. Then quickly press 1. 'Initialization clear all memory Enter to confirm Clear to exit' will briefly appear. Quickly press ENT to initialize. 'Initializing, Please stand by' then appears. Do not turn off the scanner while it is initializing. The display should then show M000 on the top line and Bank 0 CH 00 when finished.

Hope that helps.
Happy Scanning!!

Oct 24, 2012 | Radio Shack Pro-97 Handheld Scanner

1 Answer

I want the police cods for maine?

Doesn't Maine have a state law concerning the Civilian monitoring or Police channels? I know they used Trunked Multi channel systems.

Jan 13, 2011 | Radio Shack Pro-82 Scanner

1 Answer

Is there a Master reset feature for the Uniden Bearcat BCT8 scanner? Need to reprogram and start from scratch. See nothing in the manual on how to perform this function.

turn off scanner hold down the state/highway the number 2 and 9 then while holding the 3 buttons turn your scanner back on while holding the state/highway, 2 and 9 buttons if you did everything correct you will see a clear message show up and about 2 seconds later hear a beep

Oct 24, 2010 | Uniden BCT8 Base Scanner

2 Answers


need to do a RESET. Then try your local WX frequency to verify it works. The RESET will wipe out all existing programming, just to warn you. Check your manual, or for details.

Jan 12, 2010 | Radio Shack Pro-2096 Base Scanner

1 Answer

How to mend - citroen xsara radio showing error 4

Presumably you have been trying to enter a code and the radio is not accepting it.

If so , to reset your radio , LEAVE SWITCHED ON ....UNDISTURBED for as long as it takes to reset itself.(could take several hours)

If you require the correct code then read below
First make sure that the code has not been noted somewhere within the car (underneath the ash tray, glove box , rear of sun visor etc)
To see if your code is available here  for free then the radio will have to be removed from the dashboard (and if you are lucky, someone may have written the code on the casing ) .
Also quote the MAKE of CAR
note: Unfortunately not all radios can be decoded using the Serial Number
Otherwise try your Main Dealer ...........or take it into a Decode Service who will plug in a laptop to read/recode the memory chip (EEPROM). This takes a few minutes and shouldn`t be too expensive

Dec 03, 2009 | Radio Scanners

1 Answer

Radio Shack PRO-91 scanner keypad doesn't work

Try a master reset. You will lose all of your current programming but it resets the unit back to its original state when you purchased it. here are the directions from page 53 in your manual.

Resetting the Scanner
If the scanner's display locks up or stops operating
properly, you might need to reset the scanner.
Caution: This procedure clears all the information
you have stored in the scanner. Before you reset the
scanner, try turning it off and on to see if it begins
working properly. Reset the scanner only when you
are sure it is not working properly.
1. Turn off the scanner.
2. While holding down 2, 9, and Hold, turn on the
scanner. It takes about 3 seconds to initialize
and CLEAr appears.


Dec 25, 2008 | Uniden BC72XLT Handheld Scanner

3 Answers

Renault car radio unlock code

can you get the unlock code for a renault radio cassette player serial number rn259fy0156283

Mar 26, 2008 | Radio Scanners

Not finding what you are looking for?
Radio Scanners Logo

Related Topics:

761 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Scanners Experts


Level 3 Expert

3018 Answers


Level 2 Expert

204 Answers

Robert McClure

Level 2 Expert

160 Answers

Are you a Radio Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides