Question about Office Equipment & Supplies

4 Answers

Colour printing Despite installing new cartridge (Lexmark not copy) a message comes on screen saying cartridge is missing. I have tried re-installing several times as per instruction book but no success. Have never had this problem before despite having replaced both black and colour several times

Posted by on

  • christina81 Feb 09, 2008

    I cant seem to get the cartgidge in properly even after attempting to follow the directions several times.

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

Try claning the contacts of the printer cartrige with rubbuing alcohol

Posted on Jan 16, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 71 Answers

Sometime the blue protective tape shreds or seperates from the adhesive and leave the gold contacts covered. make sure all contact are clean of film or glue.

Posted on Jan 15, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 84 Answers

Maybe this is the printer pampers?
How many times approx. did you replace the cartrige?

Posted on Jan 14, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

Is by any chance a third party cartridge?

Posted on Jan 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keeps saying my colour cartridge is missing


Problem

Wrong cartridge; Left cartridge incorrect; Right cartridge incorrect; Left cartridge missing; Right cartridge missing; Error 1205; Error 1206; Cartridge error; Cartridge incorrect; Cartridge missing

Environment

Microsoft Windows XP; Microsoft Windows XP Professional x64 Edition; Microsoft Windows 2000; Microsoft Windows Vista

Solution

Explanation

An 'incorrect cartridge' or 'missing cartridge' error can be displayed if:



    • The wrong cartridge is installed, or

    • The cartridge is not installed properly, or

    • The cartridge is missing.

What to do

X4850
http://support.lexmark.com/index?page=content&id=SO4738&segment=SUPPORTproductCode%3D&productCode=LEXMARK_X4875&locale=EN&userlocale=EN_US

Feb 12, 2018 | Lexmark X5270 All-In-One InkJet Printer

1 Answer

I have a lexmark x1240 and just installed a new cartridge. I keep getting an error message that says " print cartridge missing" install print cartridge even though both cartridges are in the printer.


If you insert the old cartridge, does it recognize it? If it does, then it's a problem with the new cartridge. Try to check if you already have taken out the protective tapes out of the cartridge.

If it still doesn't recognize the old cartridge, then it's a problem with the printer.

Nov 29, 2012 | Lexmark X1240 All-In-One InkJet Printer

1 Answer

INkCartrige error 50c. Will not print. Display this note each time I try to make copy or print from computer.


Hi there

You should always mention the printer model as well as what operating system you use.

This is what i found on LEXMARK's website about your error, and it seems you have one or 2 faulty cartridges, or you are using compatible cartridges instead of Lexmark Originals:

Problem Error messages; Error: "Cartridge Error 50C"; Cartridge error; Black cartridge missing; Color cartridge missing Solution Cartridge Error 50C
Your print cartridge has shorted.

  1. Power off your All-in-One and unplug it.

  2. Plug in your All-in-One again and turn it on.

  3. Uninstall and then reinstall your cartridges.

  4. If this does not resolve the issue, try the troubleshooting steps for the other cartridge errors below.

Error: Black Cartridge Missing
The black cartridge is not installed. (Install cartridge PN 82)
Error: Color Cartridge Missing
The color cartridge is not installed (Install cartridge PN 83)
Cartridge Error
Complete the following instructions:

  1. Power off your All-in-One.

  2. Use both hands to lift up the scanner unit until the scanner support holds it open.

  3. Turn the All-in-One on. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy.

  4. Remove the color print cartridge.

  5. Lower the scanner unit until it is completely closed.

  6. If the error message reappears, replace the black print cartridge with a new print cartridge.
    If it does not repeat steps 1-3 and then go to step 7.

  7. Reinstall the color cartridge and remove the black print cartridge.

  8. Lower the scanner unit until it is completely closed.

  9. If the error message occurs again, replace the color cartridge.

  10. If an error message reappears, repeat steps 1-3 and reinstall both print cartridges.

  11. Lower the scanner unit until it is completely closed.

  12. If you receive the error message again, replace both cartridges.
Hope it helps

Andre

Sep 08, 2011 | Lexmark Office Equipment & Supplies

1 Answer

Have put in a new colour cartridge but the note on the printer comes up error 50C


Cartridge Error 50C
Your print cartridge has shorted.
  1. Power off your All-in-One and unplug it.
  2. Plug in your All-in-One again and turn it on.
  3. Uninstall and then reinstall your cartridges.
  4. If this does not resolve the issue, try the troubleshooting steps for the other cartridge errors below.
Error: Black Cartridge Missing
The black cartridge is not installed. (Install cartridge PN 82)

Error: Color Cartridge Missing
The color cartridge is not installed (Install cartridge PN 83)


Cartridge Error
Complete the following instructions:
  1. Power off your All-in-One.
  2. Use both hands to lift up the scanner unit until the scanner support holds it open.
  3. Turn the All-in-One on. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy.
  4. Remove the color print cartridge.
  5. Lower the scanner unit until it is completely closed.
  6. If the error message reappears, replace the black print cartridge with a new print cartridge.
    If it does not repeat steps 1-3 and then go to step 7.
  7. Reinstall the color cartridge and remove the black print cartridge.
  8. Lower the scanner unit until it is completely closed.
  9. If the error message occurs again, replace the color cartridge.
  10. If an error message reappears, repeat steps 1-3 and reinstall both print cartridges.
  11. Lower the scanner unit until it is completely closed.
  12. If you receive the error message again, replace both cartridges.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Mar 03, 2009 | Lexmark X5150 All-In-One InkJet Printer

4 Answers

Mx700 only printing in B&W


This is a software problem, do uninstall and re installation of the printer software on your computer and that should do it...

Dec 14, 2008 | Canon MX700 Office All-In-One InkJet...

1 Answer

Can't install lexmark x4530...get spooler subsystem app has encountered a problem,etc.


Print Cartridge(s) Missing
The following print cartridges appear to be missing, not detected, or incorrectly installed:
Cartridge on Right
Cartridge on Left

May 21, 2008 | Office Equipment & Supplies

1 Answer

New cartridge won' t print.


Was the cartridges lexmark factory replacements or was they generic replacement cartridges.

If they are generic cartridges you might want to buy lexmark cartridges because some generic cartridges will not work in some printers

Mar 03, 2008 | Lexmark JetPrinter Z22 Color InkJet

1 Answer

Lexmark x1180 printer all in one


Clean the contacts on the cartidge and printer ( open the replace ink door wait for the printhead to come to center and turn off power) if that does not work then replace cartridge, it might be a recycled one that they did not chane the chip. 

Oct 11, 2007 | Lexmark JetPrinter X1185 All-In-One InkJet

Not finding what you are looking for?

Open Questions:

0 Answers

ricoh aficio sp C232SF / c231sf When enabled, initializes but does not print Ricoh Aficio SP C232SF / c231sf The situation is. When enabled is initialized, writes that greeedy and is in readiness. No mechanism at this time does not work, except the scanner line. Scanning Starts, black and white is faster than the ruler, the color is slow. The document feeder works off a sheet and hands. After all the manipulations on the display Processig shines indefinitely no mechanism works until you press stop. The same situation when you try to print reports or when sending to print from a computer. the driver stood on the USB bus. Using command center see it all, but printing is also not achieved. Sees the tray and the presence of paper. Now this is the strange print though, and no, the black toner decreases. Already there was an inscription about it on the display and in commands the center shows the decrease in black. Only black. If you press for example copying, will stand and-writes about the heating of the stove no mechanical work and after a couple of seconds is ready. Stove at this time safely lying on the table next to the machine. the line Lamp is normal, but no power is supplied to it. The power supply did not find any problems. In the service you start the registration-work out the engines of development and tape, and a couple of auxiliary. Tried to make init EEPROMy, tried to rewrite the data in it, as if installing a new one-no changes Any ideas and assumptions are accepted And for dessert - a main Board, engine and the controller changed. The situation is quite similar. Sew and successfully both through the grid and through the USB port. I don't know where to look

Sep 23, 2018 | Ricoh Office Equipment & Supplies

Office Equipment & Supplies Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8080 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...